• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1451-1459
• /
• 1995

The objective of this paper is to evaluate the material properties of SA312 TP316 and SA312 TP304 stainless steels and their associated welds manufactured for safety injection system of Yonggwang 3,4 nuclear generating stations. A total of 62 tensile tests and 46 fracture toughness tests were conducted and the effects of various parameters such as pipe size, crack plane orientation, tests were conducted and the effects of various parameters such as pipe size, crack plane orientation, test temperature, welding on material properties were discussed. Test results show that the effect of test temperature on fracture toughness was significant while the effects of pipe size and crack plane orientation on fracture toughness were negligible. Fracture toughness of the weld metal was in general higher than that of the base metal.

• 한국공간구조학회논문집
• /
• 제10권2호
• /
• pp.127-134
• /
• 2010

막 구조는 자유로운 형태, 경량성, 내구성, 햇빛 투광성 및 균질성 때문에 전 세계적으로 현대 건축물에 다양하게 사용되어 왔다. 새로운 막 재료의 개발로 새로운 건축 구조설계에 대한 가능성을 열어가고 있다. 최근 주로 사용되는 막 구조의 지붕 재료에는 PVC, PVF, PVDF, PTFE 코팅 막재 및 ETFE 막재가 수로 사용되고 있다. 건축용 막은 내화성, 강도 부족, 인열강도, 내구성 및 탄성 등에 대한 몇가지 문제점들을 가지고 있다. 이러한 문제점들을 평가하기 위해서 본 연구에서는 PVDF 코팅 폴리에스터 막재에 대한 인장강도, 인열 강도 및 반복하중거동 시험을 실시하여 건축용 막재의 기초적인 역학적 특성을 분석하고자 한다. 막재의 탄성계수는 337.30~1257.63N/$mm^2$, 신율은 17.90~26.91%로 주어졌다.

• Nuclear Engineering and Technology
• /
• 제21권3호
• /
• pp.165-170
• /
• 1989

준 동적 파괴가 일어나는 변형율속도 조건에서 A533B-1 원자로 압력용기강의 파괴인성 및 파괴저항특성에 미치는 변형율속도의 영향을 균열선단의 강 소성역 관찰 및 파면의 미세거칠기측정을 통해 연구하였다. 1/2T-CT 파괴시편에서 약 1.5mm 이하의 균열진전에 대해서는 소성일로 부터 구한 J와 수정 J가 거의 일치하였다. 파면의 미세거칠기로부터 구한 국부 변형율은 1.8-2.0 정도의 값을 나타내어 거시적으로 측정된 값보다 높은 값을 보여주었다. 이들 방법은 모두 변형율속도가 증가함에 따라 파괴인성은 증가하나 tearing modulus는 큰 변화가 없음을 보여주었다.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.176-183
• /
• 2020

In order to study wearable air cushion materials capable of responding to massive impact in high-altitude fall situation, high tenacity woven fabrics were bonded by heat only depending on various type of thermoplastic films and then mechanical properties were measured. Tensile strength, elongation, and 100% modulus measurement results for 4 types of films show that TPU-2 has higher impact resistance and easier expansion than PET-1. After thermal bonding, the combination with the highest tensile strength was a material with a TPU-2 film for nylon and a PET-2 film for PET, so there was a difference by type of fabric. The tear strength of the bonded materials were increased compared to the fabric alone, which shows that durability against damage such as tearing can be obtained through film adhesion. All of the peel strengths exceeded the values required by automobile airbags by about 5 times, and the TPU-2 bonded fabric showed the highest value. The air permeability was 0 L/dm2 /min. For both the film and the bonded material, which means tightness between the fabric and the film through thermal bonding. It is expected to be applied as a wearable air cushion material by achieving a level of mechanical properties similar to or superior to that of automobile airbags through the method of bonding film and fabric by thermal bonding.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.161-176
• /
• 1993

본 논문에서는 주어진 상황에 맞추어 적절한 수준에서 건전성평가를 수행하기 위하여, 개정된 BSI PD 6493의 3단계 평가방법에 균열성장효과를 고려한 건전성 평가방법과 균열의 안정성장을 엄밀히 고려할 수 있는 안정성 평가방법(stability assessment method:SAM)과 더불어 소성 붕괴를 평가하는 극한하중해석을 고려한 건전성 평가방법을 정식화하였다. 또한 신뢰성이론 중 2차 모멘트방법을 사용하여, center cracked panel(CCP) 시편과 관통균열을 갖는 파이프에 대하여, 신뢰성해석에 의한 건전성 평가를 수행하였다. 신뢰성해석을 수행하는데 필요한 확률변수들의 통계적 특성은 지금까지 보고된 그들 변수들의 실험자료와 통계해석의 결과들을 이용하였다. 또 기존의 신뢰성해석에서 정확한 파괴확률을 구할 수 있는 Monte Carlo 방법을 사용하여, 본 논문의 유용성을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.488-503
• /
• 1999

The present paper considers the constraint effect on J-R curves under the two-parameter $J-A_2$ controlled crack growth within a certain amount of crack extension. Since the parameter $A_2$ in $J-A_2$ three-term solution is independent of applied loading under fully plasticity or large-scale defor-mation $A_2$ is a proper constraint parameter uring crack extension. Both J and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and A2 as a con-straint parameter. Approach of the constraint-corrected J-R curve is proposed and a procedure of transferring the J-R curves determined from standard ASTM procedure to non-standard speci-mens or real cracked structures is outlined. The test data(e.g. initiation toughness JIC and tearing modulus $T_R$) of Joyce and Link(Engineer-ing Fracture Mechanics 1997, 57(4) : 431-446) for single-edge notched bend[SENB] specimen with from shallow to deep cracks is employed to demonstrate the efficiency of the present approach. The variation of $J_{IC}$ and $T_R$ with the constraint parameter $A_2$ is obtained and a con-straint-corrected J-R curves is constructed for the test material of HY80 steel. Comparisons show that the predicted J-R curves can very well match with the experimental data for both deep and shallow cracked specimens over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. The constraint effects of specimen types and specimen sizes on the J-R curves can be easily obtained from the constrain-corrected J-R curves.