• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.65-73
• /
• 1980

The purpose of this study is ti find out a desirable way to stability and improvement of household economy by studying the changes of consumption level and consumption pattern of urban salary and wage earners' households during the years from 1970 to 1978. For this study, "Annual Report on the Family Income and Expenditure survey" (Published by the Bureau of Statistics, Economics Planning Board) has been used as basic material, and the methods of analysis used here are the time series analysis. We have gained the results as follows: 1) From 1970 to 198, the total income level increased at the rate of 416.2% in nominal price, but only 74.4% in reql price, while the total expenditure level showed 338.5% increase in nominal price, but its real increased proved only 418.2% in consideration of inflation. APC decreased from 95.1%(in 1970) to 80.7%(in 1978). 2) As for the expenditure pattern for the above mentioned nine years, the rate of food expenditure increased until 1975 under the price influence, but it trended to decease there after on . The rate of housing expenditure showed a gradual increase while that of fuel and light expenditure was on the decrease. The rate of clothing expenditure had been on the decease until 1974 but it began to increase gradually thereafter on. The trend of miscellaneous expenditures was irregularly up and down, educational expences being the first rank among them, Non-living expenditure had been constant until 1974 but it decreased a little after that. From the results it was found that the consumption level of the salary and wage earners' household in all cities from 1970 to 1978 was not practically improved because of rise in prices, nor was the Engel's coefficient and the rate of miscellaneous expenditure changed distinctively. However, as the successive decrease of APC suggests the possibility of economic development, we must try to put stress on economy in consumption and on encouraging. This will help run our household economy in safety and stability.

• Journal of the Korean Society of Costume
• /
• v.50 no.4
• /
• pp.181-195
• /
• 2000

This study was conducted from Sep., 1999. to Nov., 1999. It researched approximately 60 specialized manufacturers who had homepages on the Internet. Of the 60 manufacturers, 20 of them were chosen for the study all of whom had relatively were made homepages that were geared towards sales. 1. Daily Hanboks on the homepages were put in an electronic catalog. They were photographed and well described. Each picture could be enlarged when needed. 2. The Hanbok's were made for men, women and children. There were every couple's Hanboks. The Hanboks used natural material, mixed spinning and chemical textile, which was easily kept and washed. It was intended, as clothes for everyday wear Silk was used for formal clothes. 3. The prices ranged from low-middle to high clothing for everyday life is reasonable and street wear and formal dresses are priced high. The color of the dresses are not vibrant, but natural and light. As Hanboks become more in demand, there will be more choices available. 4. As matter of the sizes shows weakness. In general they use the western size system. The purpose of this study is to show the direction that Hanbok manufacturers may take for the internet sales and for being more active to promote the spread of the dress. This research came to the fellowing conclusion. Even though Hanbok manufacturers operate homepages. it seems that they are not well used. However, many internet shopping malls have been opened and they have put Daily Hanboks into one of their sales categories. The internet malls are getting more active and are expanding more. Therefore the market value of the Hanboks in the future look optimistic. If smaller sized manufacturers of Daily Hanbok's establish cooperative network that have no time and space limit, they can use the strong power of the market as the market development for Daily Hanboks is endless.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2018

This study conducted a survey of members at sports climbing centers on the purchasing and wearing conditions of sports climbing wear and design preferences. 140 participants were in their 20's and 30's, and many of them engaged in sports climbing activities over 20 times a month. They put emphasis on the motion adaptability, durability, price and functional material when purchasing a climbing wear. However, only 23% of them used sports climbing wear. The reasons for wearing sports climbing wears were suitability for physical activity, comfort, and design. On the other hand, the reasons for not purchasing them were expensive prices and lack of designs. They experienced inconveniences at sleeves and waist in shirts. In case of pants, participants experienced inconveniences with the knee and thigh when they climbing. Concerning the damage of shirts, the majority experienced the elbow part was worn out, and the knee part was either worn out or torn at pants. Design preference results showed participants preferred loose-fit short-sleeved shirts that could cover half of the hip. In case of pants, they preferred basic-fit long trousers and basic hems with no functional characteristic. 3 sports climbing instructors answered that climbing wears should put emphasis on deodorization and antimicrobial effects as well as durability and suitability for physical activity. They also pointed out limitations in price and design and presented opinions about creating various sizes for different body parts by taking into account the growth of muscles.

• Journal of the Korean Society of Costume
• /
• v.23
• /
• pp.169-181
• /
• 1994

The Purpose of this study is to help the neck-tie business enterprise establish the reasonable marketing strategy meeting consumer' needs by grasping their characteristic of purchasing neck-ties and their attitudes toward trademarks. The findings of this study are as follows : 1. It was shown that the neck-tie enterprise tended to appeal to megazines, catalogues , etc as promotional politics, while the tips obtained by consumers would come from the showcase at the purchasing place. and the consumer showed a positive response to the salesperson's advice. For this result, it is required to place further emphasis on the marketing policy such as the display of products at the store or the education of sales persons. 2. It was shown that the consumer tended to use the department store as the purchasing place remarkably, and so it could be found that the use of the department store is becoming generalized to the consumer. But is was shown that the consumer sensitive to prices tended to make use of the marketplace as the purchasing place, so the practical marketing strategy should be established in relation to this trend. 3. The important elements excreting an influence on the consumer's purchasing the neck-tie were shown to be in orders of design > color> harmony > with suit > price > quality, and the product differentiation policy used by the business enterprise to appeal to the consumer was shown to be in orders of design >color > quality > material > price. Accordingly , it was consistent with the consumer's criterion for choice to an extent. 4. It was shown that the selling price for the neck-tie brand actually was higher for imported or technically cooperated brands than for the home-made brand. Thus, the consumer's perception of the price for the neck-tie was consistent with in this regard, consumers did not feel some difference in quality between the home -made neck-tie brand and the imported or technically cooperated neck-tie brand . Therefore, it is important to produce the product capable of satisfying the consumer's need by manufacturing the own brand on basis of impored technology.

• The International Journal of Costume Culture
• /
• v.13 no.1
• /
• pp.42-50
• /
• 2010

The purpose of this study was to find differences in evaluation criteria and product information based on jeans products consumers. The participants of this study were women age of 19 to 30 years. This study was implemented by descriptive survey method using questionnaires. A total 182 questionnaires were analyzed in this study. The subjects were grouped by the evaluation criteria of purchasing jeans through an online shopping. Finding of the study showed that, Group 1 was high involvement group. They conscious of both style feature and practicability of jeans when they bought jeans. Group 2 was low involvement group. They are not conscious of those features. The important factors were different by groups. The most important factors of purchasing jeans for Group 1 were fashion trend and practicality. Price was the most important factor for Group 2. They bought jeans at extremely low or high price. On the other hand, Group 1 bought jeans of diverse prices range. The popular shopping sites were different between two groups. The department store was the most important place purchasing jeans for both groups. The second important place was specialty stores for Group 1, and online shopping for Group 2. The usefulness of product informations were also examined when they evaluated the jeans at online shopping. The most useful product informations were leg cut style and rise length. Fit information was very important for Group 1. Group 1 considered that the function of zoomming the picture image was important. The material characteristic and name of brand were also useful than Group 2. But the size and care instruction were not highly useful.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.491-502
• /
• 2012

The world's food production systems are becoming an area of great concern for both human and ecological health. Research has identified that one of the greatest threats to sustainability is conventional industrial agricultural systems and the high energy and material cost they require to function. The organic food movement is contributing as promising alternative to the current dominant model. Over the last 50 years it has developed into the most visible brand for a healthier and more environmentally sustainable food system. However, to achieve its full potential there are still a number of hurdles which must be overcome to make organic products a more viable and appealing option for consumers. This paper provides an overview of key research that has been conducted on why consumers are buying organic products, what they are buying and what is preventing them from purchasing more. It concludes that the key challenge is for the organic food movement to convince existing consumers of the superior 'value' of its products. In addition there are a number of methodological issues associated with analysing the market for organic products as well as issues of limited distribution, intermittent availability and high prices that are currently preventing increases in sales. Recognition and management of these barriers could contribute to more effective targeted research into consumer food purchasing motivations and subsequently the development of more sophisticated marketing strategies that assist in maintaining integrity with consumers and fending off challenges from conventional as well as other complementary food systems such as local food movement. And finally to achieve these market growth strategies the organic food movement will need to cope with its diverse constituency - ranging from global corporates through to local production and consumption - and provide attractive opportunities to individuals and business at all stages in supply chain whilst retaining credibility with government to ensure ongoing policy support.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.49-57
• /
• 2011

Stiff competition and skyrocketing prices of raw materials are increasingly demanding the optimal design and operation of iron and steel mills minimizing trial and error. Computer simulation can provide the methodology in accordance with requirements. The purpose of this paper is to suggest a simulator for the design and operation of the steelmaking and continuous casting mill. The simulator was developed using Arena, popular simulation software and input and output interface based on MS Excel. It allows easy access for the maintenance and extension of the model. One of distinct features of the proposed simulator is the inclusion of complex transportation modules composed of transfer cars and overhead cranes. The simulator can be used for evaluating various alternative designs of a projected mill via throughput analysis and material flow analysis. Also, one can utilize it effectively to search for the best product mix suitable for many types of situations. It could be an invaluable tool evaluating the performance of operation patterns and improving the accuracy.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.11-23
• /
• 2018

The need for remanufacturing automotive parts is required due to the depletion of resources, rising raw material prices and strengthening environmental regulations. For remanufacturing, stable supply and demand of core must be accompanied. At present, remanufacturing companies collect cores through various routes, but the recovery rate of cores from the End-of-Life Vehicles is low. If we can systematically collect cores from hundreds of thousands of ELVs that were generated each year, the recovery rate of the core for remanufacturing will be further improved. Therefore, in this paper, we tried to establish a classification system for the ELV as a method for collecting the cores from the ELV. First, we selected the elements affecting the classification and determined the scope for the evaluation. The final rating classification is established by calculating the weights among the influence elements. Finally, through the case study, the dismantling grade of the actual ELV was evaluated to derive the second grade.

• Journal of the Society of Disaster Information
• /
• v.8 no.4
• /
• pp.328-335
• /
• 2012

The resource-based estimating based on standard unit price of construction work was estimated by multiplying the price per standard unit of work on the amount of labor, material, equipment use time. However, limitation of the resource-based estimating way does not adequately reflect the actual transactions prices. On the subject of water tunnel excavation as a new attempt to overcome these limitations, this study analyzed productivity by work type into cutter inspection/ exchange, TBM maintenance, TBM inspection/refueling, subsequent installations, tramcar, operating change, a cave-underground reinforcement / rock reinforcement, safety / meetings and analyzed actual cost estimating and the net advance rate based on this analysis result. Actual cost estimating calculation approach presented in this study can be utilized as a useful tool to predict the actual cost estimating in the TBM water tunnels field.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.171-178
• /
• 2016

Extensive efforts from all over the world have been made to solve energy problems, such as high oil prices, global warning due to the depletion of oil. Among them, biofuel has been drawing attention as a clean energy, which can replace fossil fuels. However, conventional biofuels were often converted from eatable biomass such as sugar cane, corn and soy which should be replaced with uneatable biomass. In this study, a techno-economical evaluation of the gasification of biomass waste with mixed alcohol synthesis process was performed. Considering available domestic biomass wastes, a 2000 ton/day conversion plant were assumed to produce 533000 L/day ethanol. Also, financial data from previous studies were evaluated and used and economical sensitivities with various operation conditions were established. Economic analysis were conducted by the payback period and internal rate of return (IRR) and net present value (NPV). Sensitivity analyses of raw material costs, initial investment, the major process cost, ethanol price changes and operating costs were all performed.