• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.214-217
• /
• 2002

Micro Surface Electrochemical Machining has traditionally been used in highly specialized fields such as those of the aerospace and defense industries. It is now increasingly being applied in other industries where parts with difficult-to-cut material, complex geometry and tribology such as compute. hard disk drive(HDD) are required. Pulse Electrochemical Micro-machining provides an economical and effective method for machining high strength, high tension, heat-resistant materials into complex shapes such as turbine blades of titanium and aluminum alloys. Usually aluminum alloys are used bearings to hard disk drive in computer. In order to apply aluminum alloys to bearing used in hard disk drive, this paper presents the characteristics of Micro Surface Electrochemical machining for aluminum alloy.

• Environmental and Resource Economics Review
• /
• v.23 no.1
• /
• pp.91-132
• /
• 2014

We investigate the effect of ICT capital on the demands for labor and energy in manufacturing and electricity gas water industries of Korea, US, and UK. Assuming ICT capital, non-ICT capital, labor, electricity, fuel, and material as input factors for manufacturing and ICT capital, non-ICT capital, labor and energy material as input factors for electricity gas water industry, we estimate the Morishima elasticities of substitution. Considering the relative price changes of input factors, ICT capital has substituted labor in manufacturing and electricity water gas industries of the three countries. ICT capital has substituted both electricity and fuel in US and UK manufacturing. Although ICT capital has substituted electricity and fuel each other in Korean manufacturing, ICT capital is unlikely to decrease the demands for electricity and fuel when considering their relative price changes. ICT capital has substituted energy material in electricity gas water industries of the three countries.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.36-39
• /
• 2003

Due to the strength and biocompatibility requirement, the stainless steel SUS 316L is widely used for trauma internal fixation device. SUS 316L can be hardened and strengthened only by cold work. In this work, the material compression test is performed both in laboratory and computer simulation by a FEM analysis software DEFORM to correlate the hardness to strain. This data is then used for preform design and predict the hardness of the finish bone plate forging. Finally, we compared the hardness between the actual forging and computer analysis results. Although the predicted hardness from computer simulation. is 55HV higher than the final forging sample, we can get good compatibility on the hardening tendency of cold forging.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.47-52
• /
• 2014

Due to of high intensity, lower noise and easy controllability of the heat, induction heating system became well known. Induction heating method has been suggested as substitute for the gas heat source and adopted in the automation of curved hull forming system. In this study, an investigation was accomplished to find the effects on the change of material properties when the induction heating was applied on the mild steel plate. Plates were heated using weaving method to get sufficiently heat affected zone and then cooled with water or in the air. The mechanical properties of the heated plate were evaluated. As results, the tensile test, impact test and microstructures satisfied the class rule.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.3
• /
• pp.177-183
• /
• 2011

Occupational exposure to silicon carbide dust of manufacturing industries has seldom been evaluated in Korea. Accordingly, we evaluated various silicon carbide dust concentrations in the breathing zone of workers between May 2010 and July 2010. To compare silicon carbide dust concentrations, three dust samplers including the Institute of Occupational Medicine (IOM) sampler, 37mm cassette sampler, and Aluminum cyclone sampler were used. A total of 5 manufacturing industries producing abrasive and refractory materials using silicon carbide were investigated. The geometric mean concentrations were 2.04, 0.97, and $0.48mg/m^3$ in inhalable, total and respirable silicon carbide dust, respectively. The geometric mean concentrations of silicon carbide in abrasive material manufacturing industries were slightly higher than that of refractory manufacturing industries, and finishing operations were higher than that of other operations. It was found that the results of exposure assessment in airborne dust at manufacturing industries using silicon carbide in Korea showed exceeding rate to American Conference of Governmental Industrial Hygienists Threshold Limit Value ($3mg/m^3$) was 10% in respirable dust samples. Therefore, with the consideration of the close relationship between smaller dust size and the occurrence of occupational respiratory diseases, it is suggested to promulgate the new occupational exposure limit for respirable silicon carbide dust.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.89-91
• /
• 1999

The performance of circuit interruption of $SF_6$ puffer cylinder type gas circuit breaker(GCB) has been evaluated from the results of electrical insulation strength which is depend on material property, such as $SF_6$ gas density in circuit breaker tank. In order to determine circuit breaker dimension in the safety criteria. electrical field analysis has been done by finite element method. Gas density of concerned area in the circuit breaker has been calculated. In order to predict small current break performance, Electrical field analysis result must be calculated based the results of density from cold flow dynamics. The proposed method has been carried out and evaluated for 362kV class high voltage GIS.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.1
• /
• pp.25-32
• /
• 2005

This study was conducted in 2005 to investigate the current status of total packaging industries in Korea. The trends in development of the packaging industry were observed and interpreted as several factors such as the number of packaging industries, the number of employee in packaging industries, size, employee salary, and locations of packaging industry. The number of companies showed the increase of 6.3% per year until 2002 compared to 2175 companies at packaging industry in 1991. Based on the data of the number of companies to produce packaging materials, the packaging companies for plastic, metal, and wood were rapidly increased up to over 9%, whereas the glass and paper companies were only increased in 2%. The number of paper, plastic, wood, and packaging machine companies located at Seoul in 2002 was showed the great reduction, except to glass company compared to the number of the packaging industries in 1993 according to location of the company. Value added per employee in total packaging material industries were showed about 53-thousand dollars in 2002. These values were showed about 64.5% for total manufacture industries and increased to 8.1% from 1991 to 2002.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.94-106
• /
• 2003

In recent years, the production value of Taiwanese mold and die industries have reached to a high peak in 1998, in amount of NT 604 hundred million dollars. But in recent years production value are going down year by year, till year of 2001 the production value have down to NT 394 hundred million dollars. Its main reason might be the major product were following in medium and low price category, the high accuracy and high cost mold and die still rely on import aboard. Therefore how to made the related technical database system on various field to provide the industry user to promote industries competition ability in mold and die is really urgent matter at this moment. In this research, we will offer how to apply the Visual Basic program language to edit a set of more perfect database system of mold and die material selection. At the present time, we have constructed complete Knowledge-Base-System of intelligence for forging mold and die material, the most related data from the existed data, the others are through our additional experimental results. By using this system by the user can got the related and need data easily, we hope it will reduce designing time and cost for mold and die.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.239-242
• /
• 2009

Friction stir spot welding (FSSW), developed based on principle of friction stir welding, has been paid attention as a new solid-state spot welding process. Since FSSW can produce high-quality weld in Al alloys more easily than resistance spot welding, this process has been already used for construction of Al components in the automotive industries. Despite the large industrial interests in FSSW, fundamental knowledge on welding phenomena of this process has not been fully understood. In this study, FSSW phenomena, such as the consolidation mechanism, the microstructural evolution and the material flow, were examined in Al alloy 6061. This study clarified that the elliptical zone found in the vicinity of the pin hole on the cross section was characterized by the initially lapped surface of two sheets. Moreover, the following material flow was proposed; capture of the upper material with the threads on the pin surface, spiral flow along the tool rotation, and then release at the tip of the pin.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.71-80
• /
• 1996

Handling the manufacured goods is the most cost-consuming task in material handling system in wooden furniture industries. Fully automated warehouse for cartoned goods of a furniture manufacturing company was analized to provide plant engineers and managers with some important informations on the utility and profitability of the automated storage and retrieval system(AS/RS). Process-oriented simulation modeling tech-niques were used to describe the system and to propose some alternatives to promote the efficiency of AS/RS. Simulation report could be inter-preted as follows: 1. Warehouse for the furniture goods must be designed in accordance with reliable material handling program and constructed with suitable equipments depending on the specification of packed products. 2. An excess of palletized products induced the indigestion and the inefficiency of AS/RS of the furniture industry and put this high-costly system into the shade. 3. Overcrowded AS/RS of the furniture factories could regain its material handling function by cutting down the deposit of products into the automated warehouse. For this purpose, reducing the regular output and direct delivering the outside products to the destination should be considered as the definite counterplan. And additional operation of conventional handy warehouse was also expected to improve the efficiency of main AS/RS.