• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.93-98
• /
• 2001

Purpose : This describes our experience with a tenocutaneous free flap from the dorsum of the foot or radial forearm to reconstruct the dorsal skin and extensor tendons of the hand. Material and Methods : Between february 1987 and July 1998, we treated 9 patients with composite tissue loss on the dorsal hand caused by crushing injury. Nine men had an average age of 26.4 years(range, $19{\sim}47$). We treated 5 patients with the free dorsalis pedis flap including the extensor tendons and the superficial peroneal nerve and 4 patients with reverse forearm flap including the brachioradialis tendon and/or superficial radial nerve. Flap size was average 4.4(3,2cm. Evaluation of the results was based on the survived flap rate, the recovery rates for range of motion of the metacarpophalageal joints in the operated fingers. two-point discrimination. Results : All flaps were well vascularized and survived completely. Recovery rates for range of motion of the metacarpophalageal joints in operated fingers range from $78%{\sim}99%$(average, 90%). Two-point discrimination of the transferred flaps in 5 patients average $20{\pm}3.5mm$. Conclusion : The advantages of this procedure are mass action reconstruction with tendon, one-stage operation, faster healing with less adhesion formation, and early mobilization.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.131-139
• /
• 2005

On this study, I constructed the reflective acoustic signal detecting system using 15MHz acoustic transducer. The most difficult problems discriminating the characteristics of the metal substance are the discriminating the corrosion state and seeking hidden defects by using none destructive testing. For solving these problems, at first, theoretic analysis has been proceeded on the acoustic V(z) characteristics which is very important on discriminating the material characteristics. For application the V(z) theory to discriminating corrosion state, the 100 and 500 won metal coins which are issued on the different years are used as the test samples. The experimental results showed the distinct differences among the coin's acoustic signals accorded to its issued years. I catched the common regulation by analysing the acquisited acoustic signals and convinced this technique to be very useful on corrosion discrimination of the metal substances by none destructive testing and also can be used to inspect on the aeronautical materials for safety navigation.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.13-19
• /
• 2015

Real scale fire tests was carried out for extinguishing performance evaluation of the wetting agent. The experiment was conducted in accordance with a Class A fire extinguishing test methods specified in the 'Type Approval of the Manual System Fire Extinguisher and Technical Standards of Test'. In addition, the subjects of this experiment were the wood flour and rice husk. Fire-fighting water, the three kinds of wetting agents used in the country and this study was used, was undertaken to determine a clear discrimination of the water and wetting agent. In the experimental results, it was confirmed that the internal temperature is maintained long time in the case of water. The internal temperature were rapidly lowered in the experiment of wetting agents. Therefore, the discrimination of extinguishing ability was confirmed by the temperature distribution in accordance with time. Based on the results of this experiment, this study is expected to be used as a underlying material on presenting a method of optimized performance evaluation of wetting extinguishing agent.

• Iberoamérica
• /
• v.21 no.1
• /
• pp.1-55
• /
• 2019

In Brazil, racism exists without the clear definition of race. In other words, because there is racism without a clear concept of race, racial issues are complicated in Brazil. Racism is not just a social problem. It is, above all, a political problem that arises from economic separation, exclusion, and marginalization. From the enlargement process of European colonialism, racism has been the most profound and efficient way of governance of social, material, psychological and political domination of Brazil. From this perspective, this study seeks to research racism in Brazil as a race politics. In conclusion, racial discrimination and racial inequality exist in Brazil. Thus, to study the racial discrimination and racial inequalities in Brazil, Chapter 2 examines the origins of racial politics in Brazil. Chapter 3 explores the relations of Brazilian society and races. Chapter 4 examines Black's resistance to racism as a black movement in Brazil. The first half of Chapter 5 looks at 'racial inequality in Brazil' and the latter sees 'racism in Brazil'. Chapter 6, as a conclusion, discusses the challenges and limitations of racial politics in Brazil.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.76-82
• /
• 1997

The discrimination of flaw shape and sizing is very important subject in the material evaluation for semiconductor and new materials. The aim of this paper is to investigate the spectrum analysis of artificial defect signal captured from steel ball embedded in the resin. The results show that it can be evaluated quantitatively the size of artificial defect, from the amplitude variation of same frequency if the probe with same diameter and focal length is used. Comparing with the amplitude variation of the high frequency component and low frequency component obtained from the distance of defect center position, it can be estimated steel ball and flat bottm defect.

• Mass Spectrometry Letters
• /
• v.6 no.4
• /
• pp.99-104
• /
• 2015

A liquid chromatography mass spectrometry (LC-MS) system was used to identify and distinguish oligostilbene diastereoisomers. A polyphenolic extract from Neobalanocarpus heimii known to be rich in oligostilbenes of various degrees of condensation was used as test material. Fourteen oligostilbenes were isolated from this extract on a fully automated semi-preparative HPLC system. Out of these, two pairs of dimers, one pair of trimers, two pairs of tetramers and a group of four tetramers with similar skeleton were identified as diastereoisomers. Their structures and configurations were established by spectroscopic methods. All isolated compounds were subjected to an LC-MS/MS to study their fragmentation patterns. The experiments were performed on a liquid chromatography-mass spectrometry (LC-MS) with electrospray-ionization (ESI) interface in positive mode. MS/MS spectra of each pure compound were recorded by direct infusion in identical conditions and their product ion spectra were analysed. Some subtle yet significant differences were observed between the spectra of oligostilbenes from the various diastereoisomeric series.

• Tribology and Lubricants
• /
• v.29 no.3
• /
• pp.143-148
• /
• 2013

In this study, several sensor parts used to obtain better signal stability are designed, a separate control circuit for the sensor is developed, and the results obtained using this control circuit are analyzed. The capacitances of the whole sensor system are measured using the control circuit connected to an improved flexible printed circuit board and an asymmetric dual sensor coated with a ceramic material. To realize good discrimination for a small change in the measured capacitance as the engine oil deteriorates, a commercial application-specific integrated circuit is installed on the control circuit as a capacitance-to-digital converter. The absolute error of a measured signal is found to be approximately ${\pm}4fF$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1048-1064
• /
• 2005

Detection of specific compounds influencing food flavor quality is not easy. Electronic nose, comprised of electronic chemical sensors with partial specificity and appropriate pattern recognition system, is capable of recognizing simple and complex volatiles. It provides fast analysis with simple and straightforward results and is best suited for quality control and process monitoring of flavor in food industry. This review examines application of electronic nose in food analysis with brief explanation of its principle. Characteristics of different sensors and sensor drift. and solutions to related problems are reviewed. Applications of electronic nose in food industry include monitoring of fermentation process and lipid oxidation, prediction of shelf life, identification of irradiated volatile compounds, discrimination of food material origin, and quality control of food and processing by principal component analysis and neural network analysis. Electronic nose could be useful for quality control in food industry when correlating analytical instrumental data with sensory evaluation results.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.210-212
• /
• 2003

Conventional PDC relaying with 2nd harmonic restraint makes some doubt in reliability. It can contain second harmonic component to a large extent even during internal fault, and shows a tendency of relative reduction because of the advancement of transformer's core material. It is, therefore, necessary to develop a new algorithm as well as a new technique for the effective and accurate discrimination. This paper deals with advanced algorithm, fuzzy logic based relaying by using flux differential, and a new fault detection criterion logic scheme by using wavelet transform. To comparative analysis of proposed techniques, the paper constructs power system model including power transformer, utilizing the EMTP, and collects data through simulation of various internal faults and magnetizing inrush.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.769-770
• /
• 2005

This study aims to demonstrate the practical value of radioscopic differentiation of materials. The dual energy method is proposed for identifying materials according to atomic numbers. The differentiation of materials is achieved by comparing the attenuation ratio of low and high energy photons. We used gamma-rays of 0.662 MeV and 1.25 MeV and NaI(Tl) scintillation detector with a Multi-channel Analyzer (MCA). We also carried out the Monte Carlo simulation for the case of bremsstrahlung radiation from dual electron beams of 4 MeV and 9 MeV.