• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2021

The purpose of this study is to analyze the reliability index of a design by applying the reduction factor of the recently developed fiber reinforced high strength concrete design guideline(draft). By collecting material and member test data performed for the development of the design guideline(draft), statistical characteristics of material strength and member strength analysis equations are obtained. A simul ation that appl ies the material statistical characteristics and the member anal ysis equation of the design guidel ine(draft) is performed, and the statistical characteristics of the section strength are calculated by combining the statistical characteristics of the analysis equation. Reliability analysis was performed by applying the load combination of the domestic highway bridge design code and concrete structural code, and it was confirmed that the design that applies the reduction factor for materials and members suggested in the design guideline(draft) satisfies the target reliability index.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.241-244
• /
• 2008

This study focused on the checking of design guideline using concept of reference plane as a promoting tool in order to apply to practical affair in relation to material standardization in housing build. For this purpose, we above all defined the role of reference plane. After establishing structural type can correspond to planning module of building components and coordination condition, we did exemplicated the sub-detail of building components which be to detach according to design method using the concept of reference plane that be complexed with spacial territory and replace cycle of building component or material.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.09a
• /
• pp.79-94
• /
• 2002

Root cause -Thermal expansion coefficient mismatch -Tape warpage -Initial die crack (die roughness) Guideline for failure prevention -Optimized tape/Substrate design for minimizing the warpage -Fine surface of die backside Root cause -Thermal expansion coefficient mismatch - Repetitive bending of a signal trace during TC cycle - Solder mask damage Guideline for failure prevention - Increase of trace width - Don't make signal trace passing the die edge - Proper material selection with thick substrate core Root cause -Thermal expansion coefficient mismatch -Creep deformation of solder joint(shear/normal) -Material degradation Guideline for failure Prevention -Increase of solder ball size -Proper selection of the PCB/Substrate thickness -Optimal design of the ball array -Solder mask opening type : NSMD -In some case, LGA type is better

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.403-412
• /
• 2021

As the number of mobile apps increases exponentially, automation of tests performed in the app development process is becoming more important. Until the app is released, iterative verification is performed through various types of tests, and this study was conducted focusing on the GUI test among various types of tests. This study is meaningful in that it can contribute to the stable app distribution of the developer by suggesting the development direction of the GUI test. To develop Android's GUI test tool, I collected basic data before presenting the development method by researching Android's UI controls and Material design guideline. After that, for the existing GUI test automation tool, two tools based on screen capture test and four tools based on source code analysis test were studied. Through this, it was found that existing GUI test tools don't consider visual design, usability, and component arrangement. In order to supplement the shortcomings of existing tools, a new GUI test automation tool development method was presented based on the basic data previously studied.

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.39-43
• /
• 2014

This paper examines the statistical process that should be performed with caution in the composite material qualification and equivalency process, and describes statistically significant considerations on outlier finding and handling process, data pooling through normalization process, review for data distributions and design allowables determination process for structural analysis. Based on these considerations, the need for guidance on statistical process for aircraft manufacturers who use the composite material properties database are proposed.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.32-41
• /
• 2014

The purpose of this study is providing a systematic method of exterior, interior finish materials and color scheme for elementary school and the actual color plans of elementary schools in Busan was analyzed to support the study. As a powerful design tool, a finish materials and a color are very effective to alter the perception of a building and a view. Most of the school, a shape and a material of elevations are monotonous and uniform and it makes students are hard to attach to their schools. As a place for learning and school life, the inner space of elementary classroom needs to be considered very important. The new basic guideline for developing and planning of architectural design could be achieved by researching a current plan and a finish material in elementary school. As a result, this study will benefit in planning both the exterior and interior environments of color.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.139-146
• /
• 2019

The purpose of this study is to propose the building design guideline considering photovoltaic panel installation through the analysis of relevant guidelines from home and abroad in terms of building design and solar panel installation. Conclusions can be summarized as followings; Considerations in building design : selection of the site with high solar accessibility, avoidance of the shade from the adjacent building & trees, south facing orientation of solar panel in building design, removal of shade on the solar panel from the part of building itself, load consideration of solar panel & fixing materials, safe passage securement for solar system maintenance, and planning of piping and mechanical room for solar system. Considerations in solar panel installation : harmonizing of solar panel with surrounding environment, unity of solar panel orientation & slope, regular maintenance of solar system, (in case of flat roof installation) solar panel installation afloat over the roof, installation area within the roof floor, and lower than parapet height, (in case of sloped roof installation) solar panel installation parallel with the roof slope, ventilation space securement below the panel, installation area within the roof surface, and similar material installation in empty space.

• Journal of the Korean Institute of Educational Facilities
• /
• v.7 no.4
• /
• pp.27-38
• /
• 2000

The purpose of this study is, to increase the number of and improve environmental quality of kindergartens, to minimize the time and effort required in the design and construction of kindergartens by providing architectural design guidelines(space program and area guideline). The prerequisite condition of this study, in particular, is to provide the standardized design process for designing kindergartens which has merits such as provision of more qualified environment, minimization of the effort required in the design. Through the review of domestic regulations, domestic and foreign guidelines, and on-sight investigation of existing kindergartens, the practical guidelines for space program, areas, elevations and material planning were proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.333-338
• /
• 2011

This paper describes the design process of floor damping material optimization to reduce structure borne noise. This process uses finite element analysis(FEA) along with experimental techniques to complement each other. The objective of this approach was to develop an optimized damping material application layout and thickness at the initial design stage. The first step is to find the sensitivity areas of vehicle body without damping material applied using FEA. In order to determine the high vibration areas of the floor panel, the velocity was measured using a scanning laser vibrometer from 20 Hz to 300 Hz. To excite the floor panel vibration, shaker was placed at the front suspension attachment point. The second step is the optimization process to determine the light weight solution of damping material. The design guideline of damping material was suggested that the lightweight solution was verified using test result of road noise. Design engineer could efficiently decide the design variable of damping material using parameter analysis results in early design stage.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.121-127
• /
• 2010

Technological development are now encouraging new concepts in various fields of design, including material applications. Metal can be considered as the major material that represents modern design and technology since the industrial revolution. The objective of this study was to understand characteristics of metal as design material and various application methods in interior design. This study first examined basic qualities of metal and its history used in architectural design. Secondly, based on three qualities of metal such as physical, chemical, and mechanical the authors have analyzed projects built within recent 10 years regarding aspects of metal qualities, treatments. As results projects that uses a combination of two or more qualities and treatment seem to have a more interesting affects in interior space. Moreover, each affects are related to these four design keyword: visual distortion, de-materialization, hi-technology, and time-concept. The framework developed is hopes to be used as a basic design guideline, where metal is considered not just as a mere interior finish material but as a major creative source and inspiration in interior design.