• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.965-974
• /
• 2022

Platinum anodes are widely used for metal oxides reduction in LiCl-Li₂O, however high-cost and low-corrosion resistance hinder their implementation. NiO-Li₂O ceramics is an alternative corrosion resistant anode material. Anode processes on platinum and NiO-Li₂O ceramics were studied in (80 mol.%) LiCl-(20mol.%)KCl and (80 mol.%)LiCl-(20 mol.%)KCl-Li₂O melts by cyclic voltammetry, potentiostatic and galvanostatic electrolysis. Experiments performed in the LiCl-KCl melt without Li₂O illustrate that a Pt anode dissolution causes the Pt²⁺ ions formation at 3.14 V and 550℃ and at 3.04 V and 650℃. A two-stage Pt oxidation was observed in the melts with the Li₂O at 2.40 ÷ 2.43 V, which resulted in the Li₂PtO₃ formation. Oxygen current efficiency of the Pt anode at 2.8 V and 650℃ reached about 96%. The anode process on the NiO-Li₂O electrode in the LiCl-KCl melt without Li₂O proceeds at the potentials more positive than 3.1 V and results in the electrochemical decomposition of ceramic electrode to NiO and O₂. Oxygen current efficiency on NiO-Li₂O is close to 100%. The NiO-Li₂O ceramic anode demonstrated good electrochemical characteristics during the galvanostatic electrolysis at 0.25 A/cm² for 35 h and may be successfully used for pyrochemical treating of spent nuclear fuel.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.100-111
• /
• 2022

After the corona pandemic, when consumers choose clothes, the issue of sustainability has become a more important selection criterion. The eco-friendly functional fiber used in the study is a smartcell, which has functions such as UV protection, decomposition of harmful substances, deodorization, antibacterial and biodegradation. This eco-friendly functional fiber was dyed using five kinds of natural dyes to examine the color change according to dyeability and dyeing conditions. As natural dyes, gardenia, turmeric, sappan wood, lac, and indigo were used. For comparison with smartcell, rayon, a cellulose regenerated fiber, and wool fiber, a protein fiber, were dyed under the same conditions to compare dyeability and color. The study results are as follows. It was found that smartcell had superior dyeability compared to rayon and wool in gardenia dye and showed lower dyeability than wool when dyeing turmeric, sappan wood, and lac dyes, but showed superior or similar dyeability than rayon. In case of indigo dyeing, the dyeability of smartcell was the best when dyed once, but it was found that smartcell had a lower effect on repeated dyeing compared to wool or rayon. Therefore, smartcell has superior dyeability compared to rayon fiber in gardenia, turmeric, sappan wood, and lac dyeing, and in case of indigo dyeing, it is suitable for light dyeing. When smartcell is produced as textile fashion products, natural dyeing is actively introduced and commercialized, and it is hoped that this study can be a reference material.

• 한국미생물·생명공학회지
• /
• 제50권4호
• /
• pp.501-507
• /
• 2022

대표적인 플라스틱 소재인 PET (Polyethylene terephthalate)는 높은 내구성, 경제성과 같은 유용한 물리화학적 특성으로 병, 섬유, 용기 등 다양한 산업 분야에 사용되고 있다. 최근 일회용품을 비롯한 플라스틱 사용량 증가로 인해, 이를 처리하기 위한 방법이 필요한 상황이다. 기존의 매립, 소각 등과 같이 자연상태에 노출되는 방법과 달리 최근 미생물을 이용한 친환경적인 방법이 주목받고 있다. 본 연구에서는 PETase 유전자를 가지고 있는 토양 유래 방선균 Streptomyces. javensis Inha503를 선별하고, agar plate diffusion assay를 통해 PU (Polyurethane) 가수분해 능력을 확인하였다. 해당 균주를 PET과 함께 한달 간 배양하였고, 주사전자현미경을 통해 PET 분해능력을 확인하였다. 또한, S. javensis Inha503 유전체 탐색에서 선별된 PETase 유전자를 PET 분해능이 없는 이종숙주 S. lividans와 S. coelicolor 균주에 도입하여 PET 분해능을 확인함으로써, 방선균 유래 PETase 유전자의 활성을 최초로 확인하였다.

• 한국재료학회지
• /
• 제32권2호
• /
• pp.98-106
• /
• 2022

Metal-organic frameworks (MOFs) are widely used in various fields because they make it easy to control porous structures according to combinations of metal ions and organic linkers. In addition, ZIF (zeolitic imidazolate framework), a type of MOF, is made up of transition metal ions such as Co²⁺ or Zn²⁺ and linkers such as imidazole or imidazole derivatives. ZIF-67, composed of Co²⁺ and 2-methyl imidazole, exhibits both chemical stability and catalytic activity. Recently, due to increasing need for energy technology and carbon-neutral policies, catalysis applications have attracted tremendous research attention. Moreover, demand is increasing for material development in the electrocatalytic water splitting and metal-air battery fields; there is also a need for bifunctional catalysts capable of both oxidation/reduction reactions. This review summarizes recent progress of bifunctional catalysts for electrocatalytic water splitting and metal-air batteries using ZIF-67. In particular, the field is classified into areas of thermal decomposition, introduction of heterogeneous elements, and complex formation with carbon-based materials or polyacrylonitrile. This review also focuses on synthetic methods and performance evaluation.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.1-6
• /
• 2023

In order to process plastic with similar mechanical performance to metal materials, it is necessary to improve the strength and hardness of core parts of the injection equipment in extrusion system. The tempering process is a heat treatment performed to reduce brittleness and improve elongation along with improvement of dimensional defects of martensite formed after quenching. In this study, changes in microstructure and mechanical properties according to temperature were evaluated after quenching and tempering of SM30C material. As a result, the strength and hardness were gradually decreased by tempering at 250~400℃, and the decrease was greatly increased under the tempering condition at 450℃. Under the tempering condition of 200~400℃, the main structure was lath martensite, and the precipitation amount and size of needle-shaped cementite increased along the lath with the increase of the tempering temperature. Most of the shape of cementite has a needle-like structure, and the formation of some spherical cementite is observed. Under the tempering condition of 450℃, a mixed structure of ferrite and martensite was formed according to the decomposition of martensite.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.447-457
• /
• 2023

Single-atom Pd clusters anchored on t-BaTiO₃ material was synthesized using hydrothermal and ultrasonic methods for the effective piezoelectric catalytic degradation of pollutants using vibration energy. XRD patterns of BaTiO₃ loaded with monoatomic Pd were obtained before and after calcining, and showed typical cubic-phase BTO. TEM and HAADF-STEM images indicated single-atom Pd clusters were successfully introduced into the BaTiO₃. The piezoelectric current density of the prepared Pd-BaTiO₃ binary composite was significantly higher than that of the pristine BaTiO₃. Under mechanical vibration, the nanomaterial exhibited a tetracycline decomposition rate of ~95 % within 7 h, which is much higher than the degradation rate of 56.7 % observed with pure BaTiO₃. Many of the piezo-induced electrons escaped to the Pd-doped BaTiO₃ interface because of Pd's excellent conductivity. Single-atom Pd clusters help promote the separation of the piezo-induced electrons, thereby achieving synergistic catalysis. This work demonstrates the feasibility of combining ultrasonic technology with the piezoelectric effect and provides a promising strategy for the development of ultrasonic and piezoelectric materials.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.134-140
• /
• 2023

활성탄은 주로 기체나 액체상의 흡착제로 사용되는 탄소질 재료이다. 휘발성 유기화합물의 흡착열 축적 및 산화 등에 의해 화재가 꾸준히 발생함에 따라 석탄과 야자껍질을 원료로 하는 분말 및 입상활성탄을 대상으로 폭발특성 및 열안정성을 평가하였다. 입도분석을 통해 분말활성탄은 입도범위 (0.4~3) ㎛를 가지는 것을 확인하였으며, 시차주사열량계와 열중량분석기를 사용하여 발열개시온도 및 분해거동 등의 열적 특성을 분석하였다. 부유분진에 대한 폭발위험성을 평가한 결과, 석탄계 및 야자계 분말활성탄 모두 St1 등급으로 폭발에 의한 위험성이 약한 분진으로 분류되지만 이는 상대적인 크기를 나타내는 것으로 폭발에 의한 위험성이 절대적으로 작음을 의미하는 것이 아니므로 피해저감을 위한 대책을 수립할 필요가 있다.

• 한국결정성장학회지
• /
• 제34권3호
• /
• pp.92-97
• /
• 2024

수소 생산을 위한 물 분해 시스템의 효율성을 높이려면 산소 발생 반응(OER, Oxygen Evolution Reaction)에서 촉매로 인해 발생하는 전기화학 반응의 높은 과전압을 감소시켜야 한다. 그중 전이금속을 포함하는 LDH(Layered Double Hydroxide)와 같은 화합물은 현재 사용되고 있는 백금 등의 귀금속을 대체할 수 있는 촉매 소재로 주목받고 있다. 본 연구에서는 저렴한 금속 다공성 물질인 니켈 폼을 지지체로 사용하였고, 수열합성 공정을 통해 NiCo LDH 나노결정을 합성하였다. 또한, OER 특성을 향상시키기 위해 Mo를 도핑하여 합성한 Mo 도핑된 NiCo LDH 나노결정 시료의 형태, 결정구조, 물분해 특성의 변화를 관찰하였다.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.56-65
• /
• 2024

Cast austenitic stainless steels (CASS) and austenitic stainless steel weldments with a ferrite-austenite duplex structure are widely used in nuclear power plants, incorporating ferrite phase to enhance strength, stress relief, and corrosion resistance. Thermal aging at 290-325℃ can induce embrittlement, primarily due to spinodal decomposition and G-phase precipitation in the ferrite phase. This study evaluates the effects of thermal aging by collecting and analyzing various mechanical properties, such as Charpy impact energy, ferrite microhardness, and tensile strength, from various literature sources. Different model expressions, including hyperbolic tangent and phase transformation equations, are applied to calculate activation energy (Q) of room-temperature impact energies, and the results are compared. Additionally, predictive models for Q based on material composition are evaluated, and the potential of machine learning techniques for improving prediction accuracy is explored. The study also examines the use of ferrite microhardness and tensile strength in calculating Q and assessing thermal embrittlement. The findings provide insights for developing advanced prediction models for the thermal embrittlement behavior of CASS and the weldments of austenitic steels, contributing to the safety and reliability of nuclear power plant components.

• 복식문화연구
• /
• 제9권4호
• /
• pp.574-591
• /
• 2001

This study reviews the concept and characteristics of the deconstruction philosophy in order to analyze the major aspects of the fashion world called the deconstruction fashion based on the deconstruction philosophy, and analyzes the works of Jean Paul Gaultier in terms of Derrida's deconstruction theory. The scope of this research is from 1980 to present, and this study fashion on the many kinds of literature on philosophy, aesthetics and literary criticism, and the domestic and international fashion journals and magazines. The deconstructionism is the philosophical theory which denies the traditionally recognized logocentric metaphysical theory and refuses the closed world and pursues the open world, opposing the dichotomic theory which is the deep-rooted tradition of the Western philosophy. The results of analyses centering on the internal deconstruction trend expressed in the works of Jean Paul Gaultier are as follows. 1 The past style combined with the present appears in the form of the entirely new trace, not the past emotion and meaning in Gaultier's works transcending the time and space. 2 Gaultier presents the unconventional intermeaning of meanings, producing various possibilities according to the wearing method of the wearer by layering several clothes. 3. Gaultier breaks from masculinity and femininity in the intertextuality of gender, and decomposes the fixed idea of men's or ladies'wear through the design sharing bisexual text. 4. In the intertextuality of T.P.O., Gaultier presents the problem of how to wear by mixing different items through obscuring the division of the nature of time, space, and purpose. Especially Gaultier can be called the first designer who, worthy of the father of the deconstructionism, has introduced in the fashion making inner wear like outer wear. 5. In the intertextuality of coordination, Gaultier presents a new perspective of coordination through free combination and contrast, raising a question about the man-made harmony criterion and deconstructing the clothes. On the other hand, Gaultier expresses the intertextuality of the material through the heterogeneous combination of the material. 6. The decomposition trend expressed in the many works of Gaultier reflects an open mind presenting a new perspective through the distortion of the form, exaggeration, and break from the existing construction method. 7. The decentering trend in the works of Gaultier is found to deconstruct the Western-dominated elements against the background of subcultural elements, the elements borrowed from the minority race, md the Oriental culture. 8. The discontinuity clothes of Gaultier present the disordered principle of design without the uniform rules, and express the unrestrained freedom without captivation by the preconceived idea through the disruption of the dress and its ornaments just like Gaultier.