• 한국포장학회지
• /
• 제22권3호
• /
• pp.119-125
• /
• 2016

신선편이 농산물은 소비자에게 편이성을 제공하면서 수요가 크게 증가하고 있으나 가공과정 중 절단, 박피 등의 물리적인 변화로 인하여 쉽게 품질이 변하거나 미생물 증식 등이 발생할 수 있다. 따라서 이러한 신선편이 농산물의 저장성 및 안정성 향상을 목적으로 필름이나 용기 형태의 기능성 포장재를 개발하고자 하는 노력이 지속되고 있으며, 아울러 저장기간 연장에 관한 연구도 활발히 진행되고 있다. 이와 관련하여 저장기간에 영향을 주는 항균, 원적외선, 통기성, 방담, 미약전류, 에틸렌가스 흡착 또는 분해, MA (Modified Atmosphere) 또는 CA (Controlled Atmosphere)와 같은 기체 조성 변화 등을 통해 저장기간을 연장시키는 방법이 주목받고 있는데, 한 가지에 의해서가 아니라 여러 가지 복합적인 요인들이 작용하여 저장기간을 연장시키는 방법이 효과적으로 알려져 있다. 따라서 보다 효과적으로 신선편이 농산물, 식품 등의 저장기간을 연장시키기 위해 발표된 문헌자료를 토대로 저장기간 연장 포장법, 저장기간 연장 포장소재, 종합적인 평가 방법 등을 중심으로 정리하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.922-926
• /
• 2002

In this paper, in order to investigate the catalytic effect of the sludge exhausted from waterworks as heating temperature for NOx removal, we measure NO, $NO_2$ concentration as increasing temperature of sludge pellets and applying high voltage to sludge pellets in a quartz-glass reactor at the same time. NO initial concentration is 100ppm balanced with air gas in a mixing chamber. The gas flow is 5[l/min] and the heating temperature of sludge pellets in a quartz-glass reactor is adjusted from $200[^{\circ}C]$ $400[^{\circ}C]$ to investigate the effect of sludge pellets for removal NOx$(NO+NO_2)$ as increasing temperature. $BaTiO_3$ pellets is filled in a packed-bed reactor for corona discharge to measure how much NOx$(NO+NO_2)$ is removed after generating $NO_2$ from the packed-bed reactor. AC[60Hz] voltage is supplied to the reactor for discharge. In the result, $NO_2$ concentration is decreased by sludge pellets without heating temperature for sludge pellets in case of sludge pellets done heat treatment, however NO concentration is almost the same to be compared NO initial concentration. As increasing heating temperature for sludge pellets, $NO_2$ adsorbed on the sludge surface done heat treatment is converted to NO by the thermal energy, so NO concentration is extremely increased by reduction decomposition of $NO_2$. Finally, We think the sludge is possible to use for reduction catalysts, however we need to study more about the possibility and endurance of sludge as catalysts for NOx removal.

• 한국약용작물학회지
• /
• 제28권1호
• /
• pp.47-55
• /
• 2020

Background: Curcuma longa L., a perennial crop originating from tropical and subtropical region, including India, is noted for its important medicinal properties. However, C. longa plants are unable to endure the winter season in Korea, and its rhizomes were invariably succumb to fungal infection when stored in polyvinyl bags. In this study, we accordingly sought to develop a C. longa variety capable of producing high rhizome yields and to identify stable conditions under which rhizomes can be stored in Korea. Methods and Results: We evaluated the agronomic characteristics of nine C. longa germplasms and examined the effects of storing rhizomes at different temperatures (4℃ to 24℃) in paper bags or plastic baskets. We found that the finger rhizomes was higher in CUR02, CUR03, and CUR06 germplasms than those of other groups. Furthermore, in terms of yield per 1 ㎡, the weights of the finger rhizomes and tuberous roots were significantly higher in CUR09 (3.4 ㎏/㎡) and CUR04 (678.7 g/㎡) than those of other groups. Therefore, we consider that these C. longa germplasms might be useful as breeding material. Although the fresh weights of the rhizomes were slightly reduced when stored in paper bags and a plastic baskets at 10℃ to 15℃, there was no evidence of fungal decomposition or sprouting, which is observed when using a conventional storage method. Conclusions: The results of this study indicate that the selected C. longa germplasms can provide a useful source of breeding material for the development of high yielding varieties and that a temperature ranging from 10℃ to 15℃ and the use of paper bags or plastic baskets provide stable post-harvest storage conditions for C. longa rhizomes.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.73-80
• /
• 1995

본 논문에서는 Polarity Thresholding(PT) 알고리즘을 원자력 발전소의 중요 배관 재료인 스테인레스강(SUS-304) 탐상에 응용하여 초음파 수신신호를 개선시키는 방법을 연구하였다. PT 알고리즘은 수신신호의 스펙트럼을 분할하여 얻은 각각의 주파수분할 신호들이 갖는, 결정립에 의한 간섭패턴의 분산적 신호와 결함에 의한 비분산적 신호를 구분하여 S/N 비를 개선시키는 것이다. 실험을 위하여, 실제 검사부위의 특성과 유사하게 스테인레스강을 각각 1125, 1150, 1175, $1200^\circ{C}$로 열처리하였고, 시료의 배면에 원통형 결함을 인공 가공하였다. 중심주파수가 5MHz인 초음파변환기를 사용하여, 펄스-반사법에 의해 데이터를 획득한 후 PT 알고리즘을 적용한 결과 개선된 S/N 비는 평균 14.2 dB로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.290-296
• /
• 2009

$Bi_{4}Ti_{3}O_{12}$ (BiT) thin films were grown on the Pt/Ti/$SiO_2$/si substrate using a metal organic decomposition (MOD) method. Effects of oxygen annealing on the structural properties and dielectric properties of the BiT thin films were investigated. The BiT films were well developed when rapid thermal annealed at $>500^{\circ}C$ in oxygen ambient. For the film annealed at $700^{\circ}C$, no crystalline phase was observed under oxygen free annealing atmosphere while its crystallinity was significantly enhanced as the oxygen pressure increased. The BiT film also exhibited a smooth surface with defect free grains. A high dielectric constant and a low dielectric loss were achieved satisfactory in the frequency range from 75 kHz to 1 MHz. Especially, the BiT film, annealed at $700^{\circ}C$ and 10 torr oxygen pressure, showed good dielectric properties: dielectric constant of 51 and dielectric loss of 0.2 % at 100 kHz. Its leakage current was also considerably improved, being as $0.62\;nA/cm^2$ at 1 V. Therefore, it is considered that the oxygen annealing has effects on an enhancement of crystallinity and dielectric properties of the BiT films.

• 한국환경과학회지
• /
• 제21권5호
• /
• pp.597-603
• /
• 2012

Non-thermal plasma processing using a dielectric barrier discharge (DBD) has been investigated as an alternative method for the degradation of non-biodegradable organic compounds in wastewater. The active species such as OH radical, produced by the electrical discharge may play an important role in degrading organic compound in water. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO) was investigated as an indicator of the generation of OH radical. The DBD plasma reactor of this study consisted of a plasma reactor, recycling pump, power supply and reservoir. The effect of diameter of external reactor (15 ~ 40 mm), width of ground electrode (2.5 ~ 30 cm), shape (pipe, spring) and material (copper, stainless steel and titanium) of ground electrode, water circulation rate (3.1 ~ 54.8 cm/s), air flow rate (0.5 ~ 3.0 L/min) and ratio of packing material (0 ~ 100 %) were evaluated. The experimental results showed that shape and materials of ground were not influenced the RNO degradation. Optimum diameter of external reactor, water circulation rate and air flow rate for RNO degradation were 30 mm, 25.4 cm/s and 4 L/min, respectively. Ground electrode length to get the maximum RNO degradation was 30 cm, which was same as reactor length. Filling up of glass beads decreased the RNO degradation. Among the experimented parameters, air flow rate was most important parameters which are influenced the decomposition of RNO.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.652-658
• /
• 2016

Thermal batteries use inorganic salt as electrolyte, which is inactive at room temperature. As soon as heat pellets are fired by an igniter, all the solid electrolytes are instantly melted into excellent ionic conductors. However, the abnormal heat generation by the igniter flame or heat pellets causes the thermal decomposition of the electrode and the melting of the anode, eventually leading to a thermal runaway, which results in overheating or explosion. The thermal runaway can be significantly reduced by the adoption of $Zr/BaCrO_4$ heat papers. In this study, the heat papers with various ratios of fuel (Zr) and oxidizer ($BaCrO_4$) were prepared by the paper-making process. We have investigated the calorimetric value, burning rate, and ignition sensitivity. The ignition test of heat pellets and the discharge test of thermal batteries were also carried out. At the composition of 40 wt.% of Zr, the heat papers showed the highest specific calorimetric value and burning rate. As a result, $Zr/BaCrO_4$ heat paper made by the paper-making process has shown the applicability for thermal batteries.

• Journal of Mechanical Science and Technology
• /
• 제18권1호
• /
• pp.65-73
• /
• 2004

Composites are a material class for which nondestructive material property characterization is as important as flaw detection. Laminates of fiber reinforced composites often possess strong in-plane elastic anisotropy attributable to the specific fiber orientation and layup sequence when waves are propagating in the thickness direction of composite laminates. So the layup orientation greatly influences its properties in a composite laminate. It could result in the part being .ejected and discarded if the layup orientation of a ply is misaligned. A nondestructive technique would be very beneficial, which could be used to test the part after curing and requires less time than the optical test. Therefore a ply-by-ply vector decomposition model has been developed, simplified, and implemented for composite laminates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. Also in order to develop these methods into practical inspection tools, motorized system have been developed for different measurement modalities for acquiring ultrasonic signals as a function of in-plane angle. It is found that high probability shows between the model and tests developed in characterizing cured layups of the laminates.

• 보존과학회지
• /
• 제29권1호
• /
• pp.15-24
• /
• 2013

울산시 북산동 출토 고려시대 칠사관모(漆紗冠帽)는 복식사적으로 상당히 귀한 유물로 고려시대 당시의 관모형태를 알 수 있어 역사적 문화적 사회적 예술적으로 사료적 가치가 큰 귀중한 자료라고 할 수 있다. 또한 본 유물은 상대적으로 유물이 부족한 고려시대의 실증적 정보를 제공하는 자료로 발굴 작업에 의한 출토품이라는 점에 의의가 있다. 본 연구에서는 오랜 시간동안 다양한 환경요인에 의해 영향을 받아온 유물의 보존처리를 통해 본래의 상태로 회복시키고 원형을 보존하고자 하였다. 그 결과, 실존유물이 상대적으로 부족한 고려시대 관모의 원형을 보존할 수 있었으며, 재질 및 구조분석을 통해 섬세한 사(紗)조직의 표면조직과 죽사(竹絲)로 제작된 바탕조직을 확인할 수 있었다.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.18-23
• /
• 2005

This study deals with the friction and wear characteristics of C-N coated SCM415 steel. The PSII(plasma source ion implantation) apparatus was built and a SCM415 test piece with steel substrate was treated with carbon nitrogen by this apparatus. The composition and structure of the surface layer were analyzed and compared with that of PVD(physical vapor decomposition) coated TiN layer. It was found that both of friction coefficient of C-N coating and TiN coating decreased with increasing load, however, C-N coating showed relatively lower faction coefficient than that of TiN coating. The micro-vickers hardness of C-N film is 3200 Hv, which is $32\~43\%$ higher than that of TiN film. The critical load of C-N film is 52N, which is $25\%$ higher than that of TiN film. The hardness of C-N film fabricated by Plasma ion implantation is $61\~70\%$ higher than that of base material, and faction coefficient is $14\~50\%$ lower than that of base material. It is also interesting to note that the friction was changed from adhesive wear mode to light oxidizing wear mode.