• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.403-414
• /
• 2018

In this paper, the lateral-torsional buckling of axially-transversally functionally graded tapered beam is investigated. The structure cross-section is assumed to be symmetric I-section, and it is continuously laterally supported by torsional springs through the length. In addition, the height of cross-section varies linearly throughout the length of structure. The proposed formulation is obtained for the case that the elastic and shear modulus change as a power function along the beam length and section height. This structure carries two concentrated moments at the ends. In this study, the lateral displacement and twisting angle relation of the beam are defined by sinusoidal series. After establishing the eigenvalue equation of unknown constants, the beam critical bending moment is found. To validate the accuracy and correctness of results, several numerical examples are solved.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권5호
• /
• pp.428-434
• /
• 1993

유기물 중에서 광기능성을 가지는 벤젠, 비닐 피리딘 및 스티렌 단량체를 채택하였다. 내정전결합 유동가스형 중합장치를 사용하여 플라즈마 박막을 제조하였으며 이들의 광학특성을 분석하였다. 중합시간, 압력 및 단량체 유량을 일정하게 유지하고 방전전력을 증가시키면 스티렌 박막의 중합률은 선형적으로 증가하나 벤젠 및 비닐 피리딘 박막의 증합률은 비선형적으로 증가한다. 그리고 파장이 변화에 따른 굴절률은 1.55~1.65 정도를 나타냈다. 박막의 굴절률은 방전전력의 증가에 따라 감소하게 된다. 또한 굴절률의 변화에 대한 소멸계수(K)의 계산이 $10^{-3}$정도의 범위에 있으므로 측정 결과가 타당함을 알 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1452-1461
• /
• 2020

A triple bubbler sensor was tested in LiCl-KCl molten salt from 450 to 525 ℃ in a transparent furnace to validate thermal-expansion corrections and provide additional molten salt data sets for calibration and validation of the sensor. In addition to these tests, a model was identified and further developed to accurately determine the density, surface tension, and depth from the measured bubble pressures. A unique feature of the model is that calibration constants can be estimated using independent depth measurements, which allow calibration and validation of the sensor in an electrorefiner where the salt density and surface tension are largely unknown. This model and approach were tested using the current and previous triple bubbler data sets, and results indicate that accuracies are as high as 0.03%, 4.6%, and 0.15% for density, surface tension, and depth, respectively.

• The Korean Journal of Ceramics
• /
• 제1권2호
• /
• pp.96-100
• /
• 1995

Recently, alumina/glass composites have been applied as a substrate material for hybrid IC and LSI multi-chip packaging. In this study, the characterization of sodium borosilicate glasses containing NaF and $AlF_3$ and the preparation of the resulted glass/alumina composites have been examined and the effect of the addition of fluorides on the thermal. and dielectric properties of the sintered composites have been studied. The sintering temperature of specimens was lowered by about 100-$150^{\circ}C$ by the addition of fluorine compared with the specimens without fluorine. The specimens containing fluorine showed slightly lower dielectric constants than those of the specimens without fluorine.

• 한국전자파학회논문지
• /
• 제7권4호
• /
• pp.346-352
• /
• 1996

초광대역 주파수 특성을 가지며, 제2층에 십자형 슬롯을 가지는 2층형 전파흡수체의 광대역 설계법을 제안하였다 이와같은 광대역 전파흡수체는 등가재료정수법을 적용한 이론 모델을 이용하여 설계할 수 있다. 제안한 모델을 바탕으로 30MHz~3,170MHz의 주파수 범위에서 우수한 반사감쇠 특성을 가지는 초광대역 전파흡수체를 설계하였다.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.120-130
• /
• 1995

To analyze the mechanical property and the residual stress in functionally gradient materials(FGMs), disctype TZP/Ni-and TZP/SUS304-FGM were hot pressed using powder metallurgy compared with directly bonded materials which were fabricated by the same method. The continuous interface and the microstructure of FGMs were characterized by EPMA, WDS, optical microscope and SEM. By fractography, the fracture behavior of FGMs was mainly influenced by the defects which originated from the fabrication process. And the defectlike cracks in the FGMs induced by the residual stress have been shown to cause failure. This fact has well corresponded to the analysis of the residual stress distribution by Finite Element Method (FEM). The residual stress generated on the interface (between each layer, and matrix and second phase, respectively) were dominantly influenced on the sintering temperature and the material constants. As a consequence, the interfacial stability and the relaxation of residual stress could be obtained through compositional gradient.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.142-151
• /
• 1995

A simulation program concerned with multi-surface fatigue cracks which initiated at the semi-circular surface notches has been developed to predict their growth and coalescence behaviors at the elevated temperature. Three kinds of coalescence models such as SPC(surface point connection), ASME and BSI(British Standards Institution) conditions were applied, and the results of the simulation were compared with those of the experiment. This simulation is able to enhance the reliance and integrity of structures especially under the elevated temperature which have lots of difficulties in experiments and applications. This shows that the simulation result has utility for fatigue life prediction. Even though all the specimens were the same shape, the error rate was increased in accordance with the applied stress to the specimen. Among the material constants C and m in the narrow band, the results applied upper values of the band to the simulation has shown quite small error compared with the experiment results.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.481-487
• /
• 1984

본 연구에서는 예변형된 재료에 있어서의 R값의 변형도 의존성을 고찰하기 위 하여 Rimmed 강판에 대하여 2축인장변형을 예변형으로 준 다음 다시 단축인장시험을 수행하여 R치의 변형도 의존성을 검토 하였다. 아울러 Gotoh의 이론식의 타당성을 실험 결과와 비교하여 검토하였다.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.103-109
• /
• 2007

In fatigue life prediction, it is important that fatigue life is affected by crack closure phenomenon in thin sheet Al alloy. In this research, we attempt to (1)analyze the characteristics of fatigue crack propagation in constant loading condition for thin sheet Al 2024-T3 alloy which is generally used in transportation structures, (2)identify the crack closure phenomenon in thin sheet comparing experimental results of thin and thick sheet specimen under same fatigue loading condition. In using the fatigue related material constants from these fatigue crack propagation analysis, we attempt to (3)operate the fatigue life estimating process with considering crack closure phenomenon and (4)analyze the experimental and prediction results of fatigue life in thin sheet Al alloy.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.85-91
• /
• 2009

A lip seal is widely used not only to prevent leakage of fluids from an actuator or a rotating shaft but also to exclude outside substances. Recently, TPU(Thermoplastic Polyurethane), which is one of the sealing materials, has been frequently used due to its excellent mechanical properties and wear resistance. The material constants for finite element analysis through the experiment on stress relaxation are presented. The reaction forces of a shaft as well as the contact pressures of a lip seal under condition before and after stress relaxation using finite element analysis were obtained, The results show that stress relaxation has not a little effect on the performance of a lip seal.