• Journal of Applied Reliability
• /
• v.8 no.3
• /
• pp.145-154
• /
• 2008

인공위성은 지상 시스템과는 달리 극한 발사환경 및 우주환경에 노출되고, 운용 중 수리가 불가능하며, 임무 실패에 따른 위험비용이 매우 크기 때문에 고신뢰성, 고비용의 부품, 장비 및 시스템을 채택하여 개념설계단계에서부터 신뢰성을 관리한다. 신뢰성 관리의 주요 목적은 설계변경 및 개발 사이클의 반복을 최소화하고, 개발비용을 절감하며, 시스템의 신뢰성을 향상시키기 위한 것으로서, 대부분의 우주시스템 개발 프로젝트에서는 제품보증(Product Assurance) 활동의 일환으로 수행된다. 제품보증 업무는 크게 품질보증, 신뢰성 관리, EEE 부품관리, 재료 및 공정(Material & Process) 관리, 오염관리, 소프트웨어 품질보증 등으로 구분되지만, 포괄적인 의미의 신뢰성 관리 범주에 이를 모두 포함시키기도 한다. 인공 위성의 개발과정에서 기술성능지표 중 하나로서 중점 관리되고 있는 시스템 신뢰성 관리의 세부기법, 프로세스, 개선 필요사항 등에 대하여 살펴보고자 한다.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.19-26
• /
• 2014

The building section is providing immediate causes for global climate change problems since it takes about 50% of carbon emission, 20~50% of waste discharge, 33% of energy consumption, 40% of resource use, and 17% of water consumption. So, many countries over the world have developed and implemented green building certification systems to assess sustainable performances of buildings since the early 1990s. In korea, the green building certification system to induce the diffusion of sustainable buildings was first introduced in 2002 and developed as an improved version of the G-SEED(Green Standard for Energy and Environmental Design) system in 2013 after major revisions of related legislations. This research conducts a survey targeting residents on an apartment building that was certified as green building and examines the importance of assessment criteria on apartment buildings to certify green buildings using the Analytic Hierarchy Process(AHP) method. And it proposes a new direction on certification assessment standards from the resident's prospective. As a result, assessment criteria such as indoor environment, ecological environment, energy & environment pollution, and maintenance management among 7 main ones turned out important on assessing the G-SEED system for apartment buildings, while criteria such as material & resource, water circulation management, and land use & transportation did relatively unimportant.

• Tribology and Lubricants
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2017

Recently, international attention has been focused on the development of non-traditional energy resources such as shale gas and oil sands, due to the steep increase in the demand for natural resources. The materials incorporated in an oil gas plant module experience extreme environments, and are prone to various problem such as fracture, corrosion and abrasion due to low-temperature brittleness. In order to improve the plant life, it is necessary to perform characteristics study and performance evaluation of the materials. In particular, this paper explains the main set of materials which are most frequently used in oil sands plant project. In order to investigate wear characteristics, the authors carried out abrasive wear tests of TP 316, stainless steel and SS 400, structural rolled steel. For the analysis of the abrasive wear resistance of an oil sands plant, the authors carried out the test according to ASTM G 105 "Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Test" standard guidelines. The authors have derived the results from the data associated with the loss of mass with respect to wear rate. During the test, for a given wear length for 10,000 revolutions, the rotational speed and applied force of the rubber wheel were varied.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.659-682
• /
• 2015

This study was conducted to suggest ideal management system for organic materials. As the performing method of the study, surveyed results on understanding of related persons (organic farmer 846, organic materials manufacture 70 and Organic materials Auditors 7) with eco-friendly farming were used. And the opinion on unintentional pollution source contained in organic materials was surveyed additionally. The issues pointed out by organic farmers on product of organic materials were high price (60% to total), poor efficacy (16%), disorder on distribution system (13%) and containing chemicals as a pesticide (10%). And notification system for organic materials was accepted in general (positive and so so 76%) while most interviewees preferred (89%) unification of certification system dominantly. As unintentional contamination source, pollution on imported row material was indicated as major reason, and other causes were confirmed as insertion during manufacturing process, agricultural by-products using as product additive et al. Based on these surveyed results, authors suggest bellows as considerable methods for effective improvement of management system on organic material. First, establish new integrated certification system which contains standard of quality certification and notification system on organic material. Second, for evaluation of efficacy, apply relative evaluation system of significance such as Duncan's multiple test instead of existing absolute evaluation system. Third, constitute and operate selection of standard comparison subcommittee in organic Agro-materials committee in RDA.

• Applied Microscopy
• /
• v.48 no.2
• /
• pp.49-53
• /
• 2018

A successful transmission electron microscope (TEM) analysis is closely related to the preparation of the TEM specimen and should be followed by the suitable TEM specimen preparation depending on the purpose of analysis and the subject materials. In the case of the Si-based anode material, lithium atoms of formed Li silicide were removed due to ion beam and electron beam during TEM specimen preparation and TEM observation. To overcome the problem, we proposed a new technique to make a TEM specimen without the ion beam damage. In this study, two types of test specimens from the Si-based anode material of Li-ion battery were prepared by respectively adopting the only focused ion beam (FIB) method and the new FIB-ultramicrotome method. TEM analyses of two samples were conducted to compare the Ga ion damage of the test specimen.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1212-1242
• /
• 2017

In this study, the effectiveness of the innovative company certification system, which is one of the important means of the SME innovation promotion policies, was examined in terms of technological innovation activity and performance. To this end, we used the results of 'SME Technology Statistical Survey' conducted by the Small and Medium Business Administration and the Korea Federation of Small and Medium Business in 2013~2015 to compare the innovative SMEs that have received the certifications such as Venture Certification, Innobiz Certification, and Mainbiz Certification with the general SMEs that did not. As a result, it was found that the innovative SMEs have comparative advantage in many detailed indicators related to the technological innovation activity and performance. However, the ratio of external use of R&D expenditure, the number of technology development attempts and the number of successes were not different according to the survey year, so it is necessary to strengthen the follow-up management of the system. On the other hand, the proportion of self-procurement R&D expenditure of the general SMEs was significantly higher than that of the innovative SMEs in all three-year surveys. Therefore, it is necessary to regulate the government funding for the innovative SMEs to be used as a complementary material, not as a substitute for their own R&D investment. In addition, the technological innovation activity and performance of a company were more influenced by the size of the company and the participating industry rather than by the certification, so it is necessary to consider it when establishing the technology innovation promotion policies.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.161-170
• /
• 2010

In Korea, food material industry encounters the emerging market which results from the growth of food service industry and food processing industry. Food material suppliers think that the total sales in Korean market may be around 20 trillion won. However, very small numbers of studies about Korean food material industry have been conducted. This paper analyzes the current status of food material industry and the market structure in Korea, and presents several suggestions for the development of Korean food material industry as following: building up the function of fresh-cut in production area, improving market structure, settling down the cold-chain system, enforcing the certification program for food safety.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.331-337
• /
• 2016

Purpose: The purpose of this study is the analysis of the failure mechanisms effect of circuit design characteristics of the ballast for LED Lamp Methods: Recently, electronic circuit of ballasts for LED lamp are being occurred on various failure mechanisms (whiskers, ion migration, heat dissipation problem, switching element damage) because electronic ballast circuit design characteristics are becoming more and more diverse. Results: we analysis failure mechanisms that occurs in accordance with the circuit design characteristics The ballast for LED lamp were divided into three different types (Type A, Type B, Type C) considering circuit design characteristics (thermal design, PCB patten spacing, element material) and it was experimented in the acceleration test conditions ($85^{\circ}C$, 85% R.H). Conclusion: We confirmed that failure mechanism of the ballast for LED Lamp had occurred differently in accordance with the circuit design characteristics.

• Journal of the Korean housing association
• /
• v.25 no.2
• /
• pp.71-78
• /
• 2014

In recent years, Korean government has focused on improving the environmental impact of products in order to reduce greenhouse gas emissions and to achieve their energy goals. The government has been conducting the following polices such as green procurement inducement and certification system. After carbon labeling was conducted in 2009, among a total of 1,065 items, 97 building materials have been given a certification: finishing materials items have the highest weight (56%). The increase in the certification numbers shows that there has been considerable technical efforts in the building material industry. At the awareness of carbon label and purchase of low carbon product, however, customers are aware of carbon labeling but the purchasing rate of carbon product is low. In this paper, we suggest that low carbon activities must also be considered in order to create client value by adding the concept of ecological efficiency. The objective of this study to measurer the eco-efficiency of carbon labeled building materials on the basis of environmental aspects of the product with the perspective of economy for purchasing the excellent products.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.783-790
• /
• 2014

Railway wheels and axles are the most critical parts of the railway rolling stock. The wheel carry axle loads and guide the vehicles on the track. Therefore, the contact surface of wheel are subjected to wear and fatigue process. The wheel damage can be divided into three types; wear, contact fatigue failure and thermal crack due to braking. Therefore, in the contact surface between the wheel and the rail, the materials are heat treated to have a specific hardness. The manufacturing quality of the wheel have a considerable influence on the formation of tread wear and damage. Also, the residual stress on wheel is formed during the manufacturing process is one of the main sources of the damage. In this paper, the mechanical characteristic and the residual stress according to wheel material have been evaluated by applying finite element analysis and conducting mechanical tests.