• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.345-353
• /
• 2022

This study aimed to fundamentally understand changes of cell parameters of cation-exchanged mordenites using high resolution X-ray powder diffraction for studies that immobilization of various heavy metal cation using synthesis mordenite (Na_6.6Al_6.6Si_41.4O₉₆·20.4H₂O, Na-MOR). As a results of measurement by Thermogravimetric analysis (TGA), it was confirmed that 19.4, 20.4 water molecules per unit cell were present in monovalent-cation substituted MOR (Cs-MOR, Na-MOR), and 21, 23.1, 23.2 water molecules per unit cell were present in divalent-cation substituted MOR (Pb-MOR, Sr-MOR, Cd-MOR). The space group of all the samples were identified as Cmcm belonging to the orthorhombic crystal system. Compared to Na-MOR, starting material, relative peak intensity of (110) and (200) is significantly changed after cation substitution whereas peak position is almost similar. Also, (220) peak that was not found in Na-MOR was clearly observed in Pb-, Cd- and Sr-exchanged MOR. Thus, it was estimated that changes of atomic distribution usually occurred on ab-plane while changes of cell parameters were little. Detailed changes in the cell parameters of cation-exchanged mordenites were derived from whole profile fitting method using the GSAS suite program. Changes in the axial lengths and unit cell volume of cation substitution showed different relationship depending on ionic radius and charge number. In case of monovalent-cation substituted MOR, the length of a-axis increases whereas the length of b- and c-axis decrease by absorbed cation radius. In the case of divalent-cation exchanged MOR, the length of a-axis usually decreases while the length of b- and c-axis increases by cation radius. It was confirmed that unit cell volume of monovalent and divalent cation substituted MORs had an independent tendency by cation radius.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.497-503
• /
• 2022

This study was conducted to investigate the horticultural media + decomposed granite + reused rock wool in the following mixing ratio: Control = 100:0, M1 = 80:0:20, M2 = 60:30:10, M3 = 40:30:30, M4 = 30:40:30, M5 = 0:50:50 (reused rockwool : decomposed granite : horticultural media) and develop the physicochemical properties and the growth of 'Sulhyang' strawberry runner plant. In the physical aspect of the horticultural media, statistical differences were recognized that the bulk density and particle density were lower in the control and M1. But the bulk density and particle density were high in the M3, M4, and M5, because it had high mixing ratio between recycled rock wool and decomposed granite. EAW and WBC showed a similar tendency. The air porosity and total porosity were higher in control and M1 than M3, M4, M5. Exchangeable cation (K⁺, Ca²⁺, Na⁺, Mg²⁺) and base replacement capacity (CEC) were higher in control and M1, than M2, M3, M4, and M5. As a result of the cultivation of 'Sulhyang' runner plant, the plant length was long in M2, 32.1 cm and smaller than M5 to 28.4 cm. However, if the crown diameter, which is the growth indicator of the runner plant, all 6 treatments were formed 11.23 mm-12.03 mm, which is considered to be suitable for the growth of the runner plant. There wasn't a statistical difference between the weight and dry weight of the root. As a result, the growth difference of the seedlings by the horticulture media was similar. Therefore, considering the physical properties of the horticultural media, it was judged that the air porosity and total porosity would be improved when the recycled rock wool and the decomposed granite were properly mixed rather than the use of the horticultural media as a single medium, which would be advantageous for irrigation management.

• Composites Research
• /
• v.35 no.4
• /
• pp.248-254
• /
• 2022

In this study, TiB₂-steel composite with high-fractional TiB₂ reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabricated composite, after the compression test of TiB₂-steel composite, the fracture surface was analyzed and the fracture behavior on compression test was predicted. As a result of the compression fracture surface analysis, interfacial failure trace between the steel matrix and the reinforcement was observed, and the interface between the steel matrix and the reinforcement was analyzed using TEM. From the result of microstructure analysis on the fabricated composite, it was confirmed that, in addition to TiB₂ reinforcement and steel matrix, TiC phase and coarse (Fe,M)₂B (M=Cr,Mn) phase were formed. Throughout the thermodynamic calculation, it was confirmed that TiC and (Fe,M)₂B can be formed as a stable phase under the process condition. The fabricated TiB₂-steel composite had a significantly increased hardness, and the compressive strength and Young's modulus were improved by 3.07 times and 1.95 times, respectively, compared to steel matrix. It seems that the coarse (Fe,M)₂B (M=Cr,Mn) phase formed throughout the composite causes the deterioration of mechanical properties, and by controlling the formation of the (Fe,M)₂B (M=Cr,Mn) phase, it is judged that the mechanical properties of the TiB₂-steel composite can be further improved.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.20-32
• /
• 2022

This study implemented a chelating agent (Ethylenediaminetetraacetic acid, EDTA) in purification to obtain high-purity vanadium pentoxide (V₂O₅) for use in VRFB (Vanadium Redox Flow Battery). V₂O₅ (powder) was produced through the precipitation recovery of ammonium metavanadate (NH₄VO₃) from a vanadium solution, which was prepared using a low-purity vanadium raw material. The initial purity of the powder was estimated to be 99.7%. However, the use of a chelating agent improved its purity up to 99.9% or higher. It was conjectured that the added chelating agent reacted with the impurity ions to form a complex, stabilizing them. This improved the selectivity for vanadium in the recovery process. However, the prepared V₂O₅ powder exhibited higher contents of K, Mn, Fe, Na, and Al than those in the standard counterparts, thus necessitating additional research on its impurity separation. Furthermore, the vanadium electrolyte was prepared using the high-purity V₂O₅ powder in a newly developed direct electrolytic process. Its analytical properties were compared with those of commercial electrolytes. Owing to the high concentration of the K, Ca, Na, Al, Mg, and Si impurities in the produced vanadium electrolyte, the purity was analyzed to be 99.97%, lower than those (99.98%) of its commercial counterparts. Thus, further research on optimizing the high-purity V₂O₅ powder and electrolyte manufacturing processes may yield a process capable of commercialization.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2022

The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

• Journal of the Korean Chemical Society
• /
• v.66 no.1
• /
• pp.42-49
• /
• 2022

Many elementary school teachers' lack of scientific knowledge reveal as several problems in teaching science. Thus, elementary school teachers need to improve their scientific knowledge, but there is the limit to improve the teachers' scientific knowledge through activities based on lecture that conducted in process of training and retraining them. Therefore, Improvement for training science teacher to improve scientific knowledge of elementary school teachers would be searched in this study. Depth interview was conducted toward three elementary school teachers, who had conducted action research, to improve content knowledge of material domain within teaching process and elementary school science. Based on result of the interview, difficulty and development that the three teachers were commonly experienced in process of conducting scientific inquiry in action research were analyzed. One of the difficulties of the inquiry were to figure out how the three teachers, who participated in the interview, understand specific concept, what they do not understand, and what they should study more to understand the concept. And there was a circumstance that the teachers did not know how to apply procedural knowledge, which learned explicitly in the process of setting plan for conducting research, into real context. Since there was difference between knowledge that they understand disjunctively and context that observed in real circumstance, they faced difficulty. However, the teachers conducted analysis of topic, planning research, conducting research, discussion of the result by themselves with those difficulties Thus, the teachers mentioned that not only content knowledge had been improved, but understanding of procedural knowledge, which is not intended to improve, had been also improved. Besides, they also mentioned that comprehensive understanding content knowledge, which they already understood, was also helpful. And the teachers suggest that if there were chance to discuss and examine the scientific practices by consisting of group with colleagues rather than conducting it individually it would more efficient studying. Considering their suggestion, direction of training elementary school teachers for improving their scientific knowledge should be improved in a way to understand science concepts based on direct research about context that is generated in circumstance of studying group of the teachers. Consequently, it would contribute to improvement of teaching science by combining teachers' practice and understanding.

• Journal of Christian Education in Korea
• /
• v.69
• /
• pp.77-104
• /
• 2022

The purpose of this study was to investigate the research trend of forest play. The purpose of this study is to provide basic data for the vitalization of forest play research by analyzing the research period, research content, and research methods. For this study, 57 domestic master's and doctoral dissertations were extracted through the National Assembly Library and the Research Information Sharing Service(RISS) with the keywords of 'forest', 'play', and 'forest play'. The frequency and percentage were calculated by analyzing forest play research based on four criteria: research period, research content, research method, and research subject. As a result of the research, first, the trend of forest play research by period is from 2011 to 2021, with 49 articles (85.9%) for master's degrees and 8 articles (14.1%) for doctor's degrees. Second, the trend by research content was found to be 16 basic studies (28.1%) and 41 practical studies (71.9%). Forest play research is being actively conducted centered on practical research. Third, the trends by research method were in the order of 39 quantitative studies (68.4%), 17 qualitative studies (29.8%), and 1 literature study (1.8%). Forest play research is focused on quantitative research, and comparatively qualitative research and literature research account for a low proportion. Fourth, the trend by study subject was 56 single subject studies (98.2%). The single subjects were 52 children (91.2%), 3 teachers (5.2%), and 1 parent (1.8%). As for the mixed subjects, there is one study (1.8%) targeting children and parents, and it is necessary to conduct a study with mixed subjects. As for the study of material subjects, 42 articles (73.7%) in the natural environment, 13 articles (22.8%) in educational institutions, and 2 articles (3.5%) in the media were found in the order. Research on the home environment related to forest play is insufficient, so research on parents, children-parents, and home environment related to forest play should be conducted in the future.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.

• Journal of Life Science
• /
• v.32 no.8
• /
• pp.622-632
• /
• 2022

The purpose of this study was to investigate activities as functional cosmetic materials, focusing on Rhododendron brachycarpum (RB) and Rhododendron fortunei (RF). The tyrosinase inhibitory effect, related to skin-whitening, was 32.6% and 39.3% respectively at the concentration of 1,000 ㎍/ml. The elastase inhibitory effect, related to skin anti-wrinkling activity, was 30% and 36.2% at 1,000 ㎍/ml concentration. Collagenase inhibitory activity showed 77.7%, and 80.2% respectively at 1,000 ㎍/ml concentration, which demonstrated excellent inhibitory activity. For a cell viability test, that measured on fibroblast cells by RB and RF extracts. Furthermore, the cell viability test showed 100.9% and 98.9% with cell viability at 100 ㎍/ml concentration in CCD-986Sk. The protein expression inhibitory effect of RB and RF extracts was measured by western blot at 25, 50, and 100 ㎍/ml concentrations, and the β-actin was used as a positive control. As a result, western blot of RB and RF extracts was measured by the expression inhibition rate of the MMP-1, MMP-2, MMP-3 protein, and was decreased by 67.2%, 65.5%, 13.6%, and 89.1%, 85.0%, and 62.7% at 100 ㎍/ml concentration. The mRNA expression inhibitory effect of RB and RF extracts was measured by RT-PCR at 25, 50, and 100 ㎍/ml concentrations, and the GAPDH was used as a positive control. According to the results of RT-PCR of RB and RF extracts, the expression inhibition rate of the MMP-1, MMP-2, and MMP-3 mRNA was decreased by 70.1%, 9.1%, 37.9%, and 38.2%, 8.3%, 57.3% at 100 ㎍/ml concentrations. So, RB and RF extracts showed the anti-wrinkle effectiveness as a functional cosmetic material.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.216-224
• /
• 2022

This study was aimed at validating the analysis methods for deacetylasperulosidic acid (DAA), total sugar, galacturonic acid, glucose, and galactose, which are the indicator components of fermented Morinda citrifolia polysaccharide extract (Vitalbos). We modified the previously reported methods for validating the analytical methods. The specificity, linearity, precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) were measured using phenol-sulfuric acid method and high-performance liquid chromatography (HPLC). The retention time and spectrum of the standard solution of Vitalbos coincided, confirming the specificity. The calibration curve correlation coefficient (R²), of five indicator components, ranged from 0.9995-0.9998, indicating excellent linearity of 0.99 or more. The intra-day and inter-day precision range of the assay was 0.14-3.01%, indicating a precision of less than 5%. The recovery rate was in the range of 95.13-105.59%, presenting excellent accuracy. The LOD ranged from 0.39 to 0.84 ㎍/mL and the LOQ ranged from 1.18 to 2.55 ㎍/mL. Therefore, the analytical method was validated for DAA, total sugar, galacturonic acid, glucose, and galactose, in Vitalbos. The indicator component content in Vitalbos was determined using a validated method. The contents of DAA, total sugar, galacturonic acid, glucose, and galactose were 2.31±0.06, 475.92±5.95, 72.83±1.05, 71.63±2.44, and 67.30±2.31 mg/g of dry weight, respectively. These results suggest that the developed analytical method is efficient and could contribute to the quality control of Vitalbos, as a healthy functional food material.