• 한국컴퓨터정보학회논문지
• /
• 제4권3호
• /
• pp.73-77
• /
• 1999

본 논문은 화상회의를 위한 웨이브렛 변환 부호화에 관하여 연구한 것이다. 먼저, 원영상을 웨이브렛 변환계수의 대역별 특성을 이용하여 다차원의 계층적 피라미드 영상으로 구성하고. 이웃된 프레임 간의 움직임 정보를 구하였다. 그리고. 구해진 움직임 정보를 이용하여 기준 프레임 영상과 상관관계가 적은 프레임 영상에서는 화질을 보장하고, 상관관계가 많은 프레임 영상에서는 전체 동영상의 비트율을 보장하는 픽쳐 셋 필터를 제안하였다. 실험 결과 제안한 방법은 기존의 전영역 탐색 블럭 정합 알고리즘과 차영상 알고리즘에 비해 좋은 성능을 나타냄을 확인하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제25권3호
• /
• pp.238-246
• /
• 1992

We performed case-control studies for the 1,138 Korean adult men. According to the results of UGIS, we classified the gastritis into the erosive gastritis, superficial gastritis, and hypertrophic gastritis. And then, we selected controls among non-gastritis group after matching. Alcohol intake and smoking history was obtained by questionnaire. And we observed the effects of alcohol intake and smoking to the each gastritis. The results obtained were as follows : 1. Smokers had a risk of getting erosive gastritis more than twice(2.6) than non-smokers and there was dose-response relationships between smoking and erosive gastritis. Alcohol intake, however, had no significant relation with the erosive gastritis. 2. Both smoking and alcohol intake had no significant relations with superficial gastritis. 3. Smoking had no significant relation with hypertrophic gastritis, but dividing between those who drank more than 100gm of alcohol a week and those who drank less, we obtained the odds ratio of 3.4 suggesting that there existed a significant relation between moderate or excessive alcohol intake and hypertrophic gastritis. 4. Among the gastritis patients, those who had erosive gastritis smoked most heavily, and those who had hypertrophic gastritis drank most excessively.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.89-96
• /
• 2000

본 논문에서는 정방형 도파관을 이용한 커러게이트 편파기의 설계이론에 대해 제안하였다. 도파관의 불연속 경계면의 특성을 해석하고 낮은 정재파비를 얻기 위해 수정된 $TE^\chi_mn$모드 정합법과 커러게이트 지수함수를 편파기 설계에 적용하였다. 그 결과 11.7-15.8GHz 대역에서 $90^{\circ}$에 가까운 위상천이 각을 갖는 광대역 특성을 얻을 수 있었다. 특히, 11.7-12.0GHz, 14.5-14.8GHz 주파수 대역에서 위상천이 각과 최대 정재파비 및 축비가 각각 $90^{\circ},\pm1^{\circ}$, 1.03, 1.0001로 나타나 300MHz의 대역폭을 갖는 편파기를 설계할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1753-1761
• /
• 2014

Due to the inherent inhomogeneous and anisotropy nature of the composite materials, the detection of internal defects in these materials with non-destructive techniques is an important requirement both for quality checks during the production phase and in service inspection during maintenance operations. The estimation of the time-of-arrival (TOA) and/or time-of-flight (TOF) of the ultrasonic echoes is essential in ultrasonic non-destructive testing (NDT). In this paper, we used split-spectrum processing (SSP) combined with matching pursuit signal decomposition (MPSD) to develop a dedicated ultrasonic detection system. SSP algorithm is used for Signal-to-Noise Ratio (SNR) enhancement, and the MPSD algorithm is used to decompose backscattered signals into a linear expansion of chirplet echoes and estimate the chirplet parameters. Therefore, the combination of SSP and MPSD (SSP-MPSD) presents a powerful technique for ultrasonic NDT. The SSP algorithm is achieved by using Gaussian band pass filters. Then, MPSD algorithm uses the Maximum Likelihood Estimation. The good performance of the proposed method is experimentally verified using ultrasonic traces acquired from three specimens of carbon fibre reinforced polymer multi-layered composite materials (CFRP).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.70-71
• /
• 2005

The electrical performances of organic thin-film transistors (OTFTs) have been improved for the last decade. In this paper, it was demonstrated that the electrical characteristics of the organic thin film transistors (OTFTs) were improved by using polymeric material as adhesion layer on gate insulator. We have investigated OTFTs with polyimide adhesion layer which was fabricated by vapor deposition polymerization (VDP) processing and formed by co-deposition of 6FDA and ODA. It was found that the OTFTs with adhesion layer showed better electrical characteristics than with bare layer because of good matching between semiconductor and gate insulator. Our devices of performance are field effect mobility of $0.4cm^2$/Vs, threshold voltage of -0.8 V and on-of current ratio of $10^6$. In addition, to improve the electrical characteristics of OTFT, we have reduced the thickness of adhesion layer up to a few nanometrs.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.399-406
• /
• 2005

Alloy 625 is used widely in industrial applications such as aeronautical aerospace, chemical, petrochemical and marine applications. Because of a good combination of yield strength. tensile strength, creep strength, excellent fabricability, weldability and good resistance to high temperature corrosion on prolonged exposure to aggressive environments. High qualify weldments for this material are readily produced by commonly used processes. But all of processes are not applicable to this material by reason of unavailability of matching, position or suitable welding filler metals and fluxes may limit the choice of welding processes. Recently, the flux cored wire is developed and applied for the better productivity in several welding position including the vortical position. In this study. the weldability and weldment characteristics of Alloy 625 are evaluated in FCAW weld associated with the several shielding gases($80\%Ar+20\%\;CO_2,\;50\%Ar+50\%\;CO_2.\;100\%\;CO_2$) in viewpoint of welding productivity. The results of the experimental study on corrosive characteristics of Alloy 625 are as follows; There is no remarkable difference among shielding gases. however they has a striking difference among corrosive solutions by results of distinguished density and time of corrosive solution. Generally, the shielding gases($80\%Ar+20\%\;CO_2$) was superior to the other gases on high temperature tensile and a low temperature impact. but all of the shield gases were making satisfactory results on corrosion test.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.50-58
• /
• 2003

We have developed a locally variable time-step scheme matching with discontinuous grids in the flute-difference method for the efficient simulation of seismic wave propagation. The first-order velocity-stress formulations are used to obtain the spatial derivatives using finite-difference operators on a staggered grid. A three-times coarser grid in the high-velocity region compared with the grid in the low-velocity region is used to avoid spatial oversampling. Temporal steps corresponding to the spatial sampling ratio between both regions are determined based on proper stability criteria. The wavefield in the margin of the region with smaller time-step are linearly interpolated in time using the values calculated in the region with larger one. The accuracy of the proposed scheme is tested through comparisons with analytic solutions and conventional finite-difference scheme with constant grid spacing and time step. The use of the locally variable time-step scheme with discontinuous grids results in remarkable saving of the computation time and memory requirement with dependency of the efficiency on the simulation model. This implies that ground motion for a realistic velocity structures including near-surface sediments can be modeled to high frequency (several Hz) without requiring severe computer memory

• 대한원격탐사학회지
• /
• 제9권2호
• /
• pp.7-19
• /
• 1993

In stereo vision, when we use two parallel axis images, small portion of object is contained and B/H(Base-line to Height) ratio is limited due to the size of object and depth information is inaccurate. To overcome these difficulities we take a non-parallel axis image which is rotated $\theta$ about y-axis and match other parallel-axis image. Epipolar lines of non-parallel axis image are not same as those of parallel-axis image and we can't match these two images directly. In this paper, we transform the non-parallel axis image geometrically with camera parameters, whose epipolar lines are alingned parallel. NCC(Normalized Cross Correlation) is used as match measure, area-based matching technique is used find correspondence and 9$\times$9 window size is used, which is chosen experimentally. Focal length which is necessary to get depth information of given object is calculated with least-squares method by CCD camera characteristics and lenz property. Finally, we select 30 test points from given object whose elevation is varied to 150 mm, calculate heights and know that height RMS error is 7.9 mm.

• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.271-282
• /
• 2019

Knowing the response of buildings to earthquakes is very important in order to ensure that a structure is able to withstand a given level of ground shaking. Thus, nonlinear dynamic earthquake engineering analyses are unavoidable and are preferable procedure in the seismic assessment of buildings. In order to estimate seismic performance on the basis of the hazard at the site where the structure is located, the selection of appropriate seismic input is known to be a critical step while performing this kind of analysis. In this paper, seismic analysis is performed for a four-story reinforced concrete ISPRA frame structure which is designed according to Eurocode 8 (EC8). A total of 90 different earthquake scenarios were selected, 30 for each of three target spectrums, EC8 spectrum, Uniform Hazard Spectrum (UHS), and Conditional Mean Spectrum (CMS). The aim of this analysis was to evaluate the average maximum Inter-story Drift Ratio (IDR) for each target spectrum. Time history analysis for every earthquake record was obtained and, as a result, IDR as the main measure of damage were presented in order to compare with defined performance levels of reinforced concrete bare frames.