• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5214-5218
• /
• 2011

In this paper, bandwidth improvement of a series-fed two dipole array(STDA) antenna applicable for mobile communication base station antennas is studied. The proposed STDA antenna consists of two strip dipole antennas with different lengths which are connected directly trough a coplanar stripline(CPS). By adjusting the spacing between the two dipoles and the length of the second dipole, the bandwidth of the STDA can be enhanced. In addition, an integrated balun composed of a short-circuited microstrip line and a slot line is utilized to minimize the area required for a feeding part, and a broadband impedance matching is obtained by adjusting the feeding point. Based on the proposed antenna structure, an STDA antenna covering the frequency band ranging from 1.75 GHz to 2.7 GHz, which includes almost all the existing mobile communication frequency bands, with more than 5 dBi gain is designed and fabricated on an FR4 substrate with dielectric constant of 4.4 and thickness of 1.6mm, and experimentally tested. The fabricated antenna shows impedance bandwidth of 49%(1.7-2.8 GHz) for VSWR<2, a gain higher than 5.5 dBi, and a front-back ratio better than 12 dB.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.233-246
• /
• 2003

The mediator-based system integrates heterogeneous information systems with the flexible manner. But it does not give much attention on the query optimization issues, especially for the query reusing. The other thing is that it does not use standardized metadata for schema matching. To improve this two issues, we propose mediator-based Distributed Information Integration System (DIIS) which uses query caching regarding performance and uses ISO/IEC 11179 metadata registry in terms of standardization. The DIIS is designed to provide decision-making support, which logically integrates the distributed heterogeneous business information systems based on the Web environment. We designed the system in the aspect of three-layer expression formula architecture using the layered pattern to improve the system reusability and to facilitate the system maintenance. The functionality and flow of core components of three-layer architecture are expressed in terms of process line diagrams and assembly line diagrams of Eriksson Penker Extension Model (EPEM), a methodology of an extension of UML. For the implementation, Supply Chain Management (SCM) domain is used. And we used the Web-based environment for user interface. The DIIS supports functions of query caching and query reusability through Query Function Manager (QFM) and Query Function Repository (QFR) such that it enhances the query processing speed and query reusability by caching the frequently used queries and optimizing the query cost. The DIIS solves the diverse heterogeneity problems by mapping MetaData Registry (MDR) based on ISO/IEC 11179 and Schema Repository (SCR).

• Asia Marketing Journal
• /
• v.9 no.3
• /
• pp.117-149
• /
• 2007

It can be explained by congruity theory as a process that consumers engage in a matching process to identify personal community that is congruent with their self-images to find the identification between the self and the personal community. Personal community cues that evoke certain images are viewed as activating similar beliefs about the self (e.g., high status). Individuals prompt a comparison process to determine whether the personal community and self-image are congruent and imagine prototypical users of the personal community and select ones that maximize similarity to their actual or desired self-concept. Identity is devided into personal identity and social identity. Consumers are likely to be influenced by both personal identity and social identity. In this article the influencing factors of the commitment to on-line personal community are explored by the sources of both personal identification and social identification. The results are as follows. The maintenance expression and enhancement expression of personal self influence the level of personal identification positively and the maintenance expression and enhancement expression of social self influence the level of social identification positively. The level of both social and personal identification positively influence the commitment to on-line personal community which gives positive responses to the source enterprise that allows the cyberspace and the other benefits to be used.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.229-238
• /
• 2009

This paper describes a sound engine of Korean traditional instruments, which are the Gayageum and Taepyeongso, by using a TMS320F2812. The Gayageum and Taepyeongso models based on commuted waveguide synthesis (CWS) are required to synthesize each sound. There is an instrument selection button to choose one of instruments in the proposed sound engine, and thus a corresponding sound is produced by the relative model at every certain time. Every synthesized sound sample is transmitted to a DAC (TLV5638) using SPI communication, and it is played through a speaker via an audio interface. The length of the delay line determines a fundamental frequency of a desired sound. In order to determine the length of the delay line, it is needed that the time for synthesizing a sound sample should be checked by using a GPIO. It takes $28.6{\mu}s$ for the Gayageum and $21{\mu}s$ for the Taepyeongso, respectively. It happens that each sound sample is synthesized and transferred to the DAC in an interrupt service routine (ISR) of the proposed sound engine. A timer of the TMS320F2812 has four events for generating interrupts. In this paper, the interrupt is happened by using the period matching event of it, and the ISR is called whenever the interrupt happens, $60{\mu}s$. Compared to original sounds with their spectra, the results are good enough to represent timbres of instruments except 'Mu, Hwang, Tae, Joong' of the Taepyeongso. Moreover, only one sound is produced when playing the Taepyeongso and it takes $21{\mu}s$ for the real-time playing. In the case of the Gayageum, players usually use their two fingers (thumb and middle finger or thumb and index finger), so it takes $57.2{\mu}s$ for the real-time playing.

• Information Systems Review
• /
• v.18 no.4
• /
• pp.141-154
• /
• 2016

Mobile application is growing explosively with the advent of a new technology: smartphones. Mobile application is a new marketing channel and performs as a start-up platform. This study examines the effect of mobile application on the off-line market. Despite the continuous declining demand for taxi service, paradoxically, the supply of taxi service has increased. The taxi industry can be categorized into general taxi and call taxi. General taxi is accidental and inefficient because it has to search for its own passenger. As call taxi takes the request of a passenger, it is more efficient than general taxi. However, the current defective passenger-taxi driver matching system and insufficient taxi driver management hinder the development of the call taxi market. Differences in differences (DID) is an econometrical methodology that examines whether or not an event has meaningful influence. This research uses DID to investigate the effect of the Kakao taxi application on the call taxi industry. Furthermore, it examines the effect of major companies' reckless diversification, which is considered unethical behavior. The passengers of call taxi data from August 2014 to July 2015 and those of designated driving service data of the same period were collected as the control group.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.70-75
• /
• 2012

Purpose: It is important to acquire accurate data because the SPECT scan affected by various physical factors. The aim of this study was to compare the uniformity when both centers were matched or mismatched differed from position of heart in COR. Materials and methods: The images were acquired with cylindrical uniform phantom (6.7 cm diameter, 9 cm length) and heart insert phantom using Cardio MD SPECT system (Philips, USA). The phantoms were positioned on COR as well as four different points which were 10 cm above, below, left and right side from the COR. The counts from the both edge of cylindrical uniform phantom and those from the both wall of heart insert phantom were compared by using vertical and horizontal line profile. In addition, the qualitative evaluation was performed with heart insert phantom images and volunteer test. Results: In heart insert phantom study, the differences of counts between COR and 10 cm above, below, left and right point of COR were 1.1, 4.1, 4.9, 2.2 and 0.9% using T-A curve for horizontal view. In case of vertical view of COR 3.9, 21.9, 3.5, 23.9, 14.0% were shown. In cylindrical phantom study, the differences of counts between COR and 10 cm above, below, left and right point of COR were 4.3, 0.3, 3.3, 2.6 and 0.7% using T-A curve for horizontal view. In case of vertical view of COR 2.7, 3.0, 1.0, 0.3, 3.4% were shown. For qualitative evaluation, the images at COR were the most uniform for both of heart insert phantom and volunteer test, whereas other four positions showed somewhat distorted images. Conclusion: It showed the most uniform images when COR is matched with the heart. Therefore, we can expect that distortion which increased or decreased of myocardial perfusion will be prevented by matching the heart and COR when positioning. Furthermore, the accuracy of diagnosis will be improved as well.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.300-308
• /
• 2006

$\underline{Purpose}$: To develop a wireless CCTV system in semi-beam's eye view (BEV) to monitor daily patient setup in radiation therapy. $\underline{Materials\;and\;Methods}$: In order to get patient images in semi-BEV, CCTV cameras are installed in a custom-made acrylic applicator below the treatment head of a linear accelerator. The images from the cameras are transmitted via radio frequency signal (${\sim}2.4\;GHz$ and 10 mW RF output). An expected problem with this system is radio frequency interference, which is solved utilizing RF shielding with Cu foils and median filtering software. The images are analyzed by our custom-made software. In the software, three anatomical landmarks in the patient surface are indicated by a user, then automatically the 3 dimensional structures are obtained and registered by utilizing a localization procedure consisting mainly of stereo matching algorithm and Gauss-Newton optimization. This algorithm is applied to phantom images to investigate the setup accuracy. Respiratory gating system is also researched with real-time image processing. A line-laser marker projected on a patient's surface is extracted by binary image processing and the breath pattern is calculated and displayed in real-time. $\underline{Results}$: More than 80% of the camera noises from the linear accelerator are eliminated by wrapping the camera with copper foils. The accuracy of the localization procedure is found to be on the order of $1.5{\pm}0.7\;mm$ with a point phantom and sub-millimeters and degrees with a custom-made head/neck phantom. With line-laser marker, real-time respiratory monitoring is possible in the delay time of ${\sim}0.17\;sec$. $\underline{Conclusion}$: The wireless CCTV camera system is the novel tool which can monitor daily patient setups. The feasibility of respiratory gating system with the wireless CCTV is hopeful.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.140-149
• /
• 1996

Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.

• Journal of KIISE:Software and Applications
• /
• v.30 no.9
• /
• pp.829-842
• /
• 2003

In this Paper, we propose the new face detection and tracking method based on template matching for real-time applications such as, teleconference, telecommunication, front stage of surveillance system using face recognition, and video-phone applications. Since the main purpose of paper is to track a face regardless of various environments, we use template-based face tracking method. To generate robust face templates, we apply wavelet transform to the average face image and extract three types of wavelet template from transformed low-resolution average face. However template matching is generally sensitive to the change of illumination conditions, we apply Min-max normalization with histogram equalization according to the variation of intensity. Tracking method is also applied to reduce the computation time and predict precise face candidate region. Finally, facial components are also detected and from the relative distance of two eyes, we estimate the size of facial ellipse.

• Korean Journal of Poultry Science
• /
• v.51 no.2
• /
• pp.65-71
• /
• 2024

The feather-sexing method is widely used commercially for chick sex identification. However, for feather-sexing to be industrially practical, the early-feathering (EF) and late-feathering (LF) genes must existed within the foundation stock, a suitable feather-sexing lines must be established, and the accuracy of sex identification by feather-sexing must be ensured. Therefore, this study introduces the method of constructing the Korean native chickens (KNC) feather-sexing lines using EF and LF genes and evaluates the effectiveness of feather sex determination on commercial chicks produced from the constructed KNC lines. The results showed that both EF and LF chickens existed within the foundation stock, with the frequency of LF genes ranging from 0 to 0.205. In feather-sexing line establishment, the paternal strain of the grandparent stock (GPS) was fixed as EF (kk) for both sexes, while the maternal strain was composed of males with LF homozygotes (Z^KZ^K) and females with EF (Z^kW). Thus, in the parent stock (PS), male breeder had EF (Z^kZ^k) and female breeder had LF (Z^KW), resulting in chicks produced from their crosses having LF (Z^KZ^k) for males and EF (Z^kW) for females, allowing sex determination based on feather development. Additionally, to evaluate the effectiveness of feather-sexing for the produced commercial chicks, a study was conducted on 1,000 samples of the produced chicks to investigate the concordance between vent-sexing and feather-sexing, showing a matching rate of 93.1%.