• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.471-483
• /
• 2024

Purpose: This study aimed to understand the relationship between risk-sensitive factors and safety and unsafe behavior, and to clarify the relationship between risk-sensitive factors and demographic cha- racteristics through response matching analysis. To this end, a survey was conducted on 501 construc- tion site workers and data were analyzed using the SPSS program. Method: Six factors were derived through frequency analysis, cross-analysis, exploratory factor analysis, and reliability analysis for data purification. Multiple regression analysis and response analysis were conducted. Result: Risk-sensitive sensitivity and avoidance were found to have a significant effect on safety behavior and unsafe behavior, and the relationship was found according to age and occupation. Conclusion: Taken together, it shows that safety behavior is influenced by managing individual risk sensitivity and sensitivity, and properly managing avoidance. Accordingly, it suggests that intervention is necessary to manage risk sensitivity and sensitivity to promote safety behavior and maintain a sustainable safety culture, and to prevent excessive avoidance.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.300-308
• /
• 2006

$\underline{Purpose}$: To develop a wireless CCTV system in semi-beam's eye view (BEV) to monitor daily patient setup in radiation therapy. $\underline{Materials\;and\;Methods}$: In order to get patient images in semi-BEV, CCTV cameras are installed in a custom-made acrylic applicator below the treatment head of a linear accelerator. The images from the cameras are transmitted via radio frequency signal (${\sim}2.4\;GHz$ and 10 mW RF output). An expected problem with this system is radio frequency interference, which is solved utilizing RF shielding with Cu foils and median filtering software. The images are analyzed by our custom-made software. In the software, three anatomical landmarks in the patient surface are indicated by a user, then automatically the 3 dimensional structures are obtained and registered by utilizing a localization procedure consisting mainly of stereo matching algorithm and Gauss-Newton optimization. This algorithm is applied to phantom images to investigate the setup accuracy. Respiratory gating system is also researched with real-time image processing. A line-laser marker projected on a patient's surface is extracted by binary image processing and the breath pattern is calculated and displayed in real-time. $\underline{Results}$: More than 80% of the camera noises from the linear accelerator are eliminated by wrapping the camera with copper foils. The accuracy of the localization procedure is found to be on the order of $1.5{\pm}0.7\;mm$ with a point phantom and sub-millimeters and degrees with a custom-made head/neck phantom. With line-laser marker, real-time respiratory monitoring is possible in the delay time of ${\sim}0.17\;sec$. $\underline{Conclusion}$: The wireless CCTV camera system is the novel tool which can monitor daily patient setups. The feasibility of respiratory gating system with the wireless CCTV is hopeful.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.699-706
• /
• 2010

We have studied to obtain the slanted finger interdigital(SFIT) type filter was formed on the Langasite substrate and was evaporated two IDT electrode by Aluminum-Copper alloy respectively. We can fabricate that the block weighted type IDT as an input transducer of the filter and the withdrawal weighted type IDT as an output transducer of the filter from the results of our computer-simulation. Also, we have performed to obtain the properly design conditions about phase shift conditions of the SPIT type filter. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness and the width of reflectors are $5000\;{\AA}$ and $3.6{\mu}m$ respectively. At the first sample, we have employed that the distance from the hot electrode to the reflectors is $2.4{\mu}m$ distance from the ground electrode to the reflectors is $1.8{\mu}m$ and the distance from the hot electrode to the ground is $1.5{\mu}m$ respectively. At the other sample, we have also employed that the distance from the hot electrode to the reflectors and the distance from the ground electrode to the reflectors are $2.4{\mu}m$. Frequency response of the fabricated SAW filter has the property that the center frequency is about 190MHz and bandwidth at the 3dB is probably 7.3 MHz. And we could obtain that return is less than -20dB, ripple characteristics is probably 3dB and triple transit echo(TTE) is less than -22dB after when we have matched impedance.

• Journal of KIISE:Software and Applications
• /
• v.33 no.12
• /
• pp.1073-1089
• /
• 2006

The goal of Natural Language Processing(NLP) is to make a computer understand a natural language and to deliver the meanings of natural language to humans. Word sense Disambiguation(WSD is a very important technology to achieve the goal of NLP. In this paper, we describe a technology for automatic homonyms disambiguation using both Mutual Information(MI) and a Sense-Tagged Compound Noun Dictionary. Previous research work using word definitions in dictionary suffered from the problem of data sparseness because of the use of exact word matching. Our work overcomes this problem by using MI which is an association measure between words. To reflect language features, the rate of word-pairs with MI values, sense frequency and site of word definitions are used as weights in our system. We constructed a Sense-Tagged Compound Noun Dictionary for high frequency compound nouns and used it to resolve homonym sense disambiguation. Experimental data for testing and evaluating our system is constructed from QA(Question Answering) test data which consisted of about 200 query sentences and answer paragraphs. We performed 4 types of experiments. In case of being used only MI, the result of experiment showed a precision of 65.06%. When we used the weighted values, we achieved a precision of 85.35% and when we used the Sense-Tagged Compound Noun Dictionary, we achieved a precision of 88.82%, respectively.

• Nutrition Research and Practice
• /
• v.10 no.5
• /
• pp.516-523
• /
• 2016

BACKGROUND/OBJECTIVES: This study was conducted to examine relationships between dietary habits and intakes of antioxidants and B vitamins and the risk of ischemic stroke, and to compare dietary factors according to the presence of cerebral artery atherosclerosis and stroke subtypes. SUBJECTS/METHODS: A total of 147 patients and 144 control subjects were recruited consecutively in the metropolitan area of Seoul, Korea. Sixty participants each in the case and control groups were included in analyses after 1:1 frequency matching. In addition, 117 acute ischemic stroke patients were classified into subtypes according to the Trial of Org 10172 in Acute Stroke Treatment (TOAST) guidelines. Dietary intake was measured using a semi-quantitative food frequency questionnaire composed of 111 food items and plasma lipid and homocysteine levels were analyzed. RESULTS: When compared with control subjects, stroke patients had unfavorable dietary behaviors and lower intakes of fruits ($73.1{\pm}83.2g$ vs. $230.9{\pm}202.1g$, P < 0.001), vegetables ($221.1{\pm}209.0g$ vs. $561.7{\pm}306.6g$, P < 0.001), and antioxidants, including vitamins C, E, $B_6$, ${\beta}$-carotene, and folate. The intakes of fruits, vegetables, vitamin C, and folate were inversely associated with the risk of ischemic stroke after adjusting for confounding factors. Intakes of vegetables, vitamins C, $B_6$, $B_{12}$, and folate per 1,000 kcal were lower in ischemic stroke with cerebral atherosclerosis than in those without. Overall vitamin $B_{12}$ intake per 1,000 kcal differed according to the TOAST classification (P = 0.004), but no differences among groups existed based on the post-hoc test. CONCLUSIONS: When compared with control subjects, ischemic stroke patients, particularly those with cerebral atherosclerosis, had unfavorable dietary intake, which may have contributed to the development of ischemic stroke. These results indicate that proper dietary recommendations are important for the prevention of ischemic stroke.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4165-4170
• /
• 2012

In this paper, a method for the improvement in the gain and bandwidth of a microstrip-fed broadband planar quasi-Yagi antenna (QYA) is studied. The broadband characteristics of the QYA are achieved from the coplanar strip-fed planar dipole driver and a parasitic director close to the driver. In order to obtain stable gain variation over the required frequency band, a director and a ground reflector are appended to the driver having a nearby parasitic director. The QYA is fed through an integrated balun composed of a microstrip line and a slot line which are terminated in a short circuit. By adjusting the feeding point, a broadband impedance matching is obtained. A QYA with an operating frequency band of 1.75-2.7 GHz and a gain > 4.5 dBi is designed and fabricated on an FR4 substrate with dielectric constant of 4.4 and thickness of 1.6mm. The experimental results show that the fabricated antenna has good performance such as a broad bandwidth of 59.7%(1.55-2.87 GHz), a stable gain between 4.7-6.5 dBi, and a front-to-back ratio > 10 dB. The measured data agree well with the simulation, which validates this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.90-97
• /
• 2006

We report our research work on the millimeter-wave broadband amplifier integrating the shunt peaking technology with the cascode configuration. The millimeter-wave broadband cascode amplifier on MIMIC technology was designed and fabricated using $0.1{\mu}m\;{\Gamma}-gate$ GaAs PHEMT, CPW, and passive library. The fabricated PHEMT has shown a transconductance of 346.3 mS/mm, a current gain cut off frequency ($f_T$) of 113 GHz, and a maximum oscillation frequency ($f_{max}$) of 180 GHz. To prevent oscillation of designed cascode amplifier, a parallel resistor and capacitor were connected to drain of common-gate device. For expansion of the bandwidth and flatness of the gain, we inserted the short stub into bias circuits and the compensation transmission line between common-source device and common-gate device, and then their lengths were optimized. Also, the input and output stages were designed using the matching method to obtain the broadband characteristic. From the measurement, we could confirm to extend bandwidth and flat gain by integrating the shunt peaking technology with the cascode configuration. The cascode amplifier shows the broadband characteristic from 19 GHz to 53.5 GHz. Also, the average gain of this amplifier is about 6.5 dB over the bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.400-409
• /
• 2017

We have studied a combiner that can withstand high power while minimizing insertion loss in high frequency band. In particularly, because the output power that can be output per unit elements is much lower in the Ku band and above than in the low frequency band, it is necessary to combine many semiconductor elements in order to make a high power SSPA. A planar combiner such as a microstrip, as the number of elements to be combined increases, the insertion loss increases proportionally, resulting in a reduction in the overall system efficiency and an increase heating value also. The planar combiner also have some problems due to the low power handling rate. To improve these problems, we proposed a Cavity Radial Combiner. A Ku band 16-way Cavity Radial Combiner was fabricated and measured. As a result, it was tested 14dB return loss and over 94.5 % output combining efficiency in design band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.77-83
• /
• 2011

In this thesis, 50W Doherty amplifier was designed and implemented for Beyond 3G's repeater and base-station. Auxiliary amplifier of doherty amplifier was implemented by Gate bias control circuit. Though gate bias control circuit solved auxiliary's bias problem, output characteristics of doherty amplifier was limited. To enhance the output characteristic relativize Drain control circuit And To improve power efficiency make 3-way Doherty power amplifier. therefore, 3-way GDCD (Gate and Drain bias Control Doherty) power amplifier is embodied to drain bias circuit for General Doherty power amplifier. The 3-way GDCD power amplifier composed of matching circuit with chip capacitor and micro strip line using FR4 dielectric substance of specific inductive capacity(${\varepsilon}r$) 4.6, dielectric substance height(H) 30 Mills, and 2.68 Mills(2 oz) of copper plate thickness(T). Experiment result satisfied specification of amplifier with gains are 57.03 dB in 2.11 ~ 2.17 GHz, 3GPP frequency band, PEP output is 50.30 dBm, W-CDMA average power is 47.01 dBm, and ACLR characteristics at 5MHz offset frequency band station is -40.45 dBc. Especially, 3-way DCHD power amplifier showed excellence efficiency performance improvement in same ACLR than general doherty power amplifier.