• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.7-12
• /
• 2008

In this paper, a highly efficiency power amplifier is presented for multi-band antenna system. The class F power amplifier operating in dual-band designed with one LDMOSFET. An operating frequency of power amplifier is 900 MHz and 2.14 GHz respectively Matching networks and harmonic control circuits of amplifier are designed by using the unit cell of composite right/left-handed(CRLH) transmission line(TL) realized with lumped elements. The CRLH TL can lead to metamaterial transmission line with the dual-band holing capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of all harmonic components for high efficiency is very difficult, we have controled only the second- and third-harmonics to obtain the high efficiency with the CRLH TL. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.442-450
• /
• 2014

This paper is a study of the propagation characteristic of matching liquids in the skin-covered breast model. In order to evaluate the matching liquids, we investigated six kinds of matching liquids applied to proposed 1-D breast model from frequency range of 3~6 GHz. A uniform plane wave is projected / transmitted inside the multi-layered breast model. Then the propagation characteristics inside the model and the transmission loss of each matching liquids were analyzed. The studying method presented in the paper can be used in the breast cancer detection system, the field of cancer detection using human tissue and the field of other medical devices. This paper was applied to the breast cancer detection system. Consequently, these studies could be used to determine the suitable type of matching liquids for breast cancer detection system and to apply useful for performance analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.171-178
• /
• 1998

Generally, the output matching circuit has the most influence to the output power of oscillator and existing method for output matching has difficulty for making the optimum output matching circuit because the matching has to be done nearby the infinite impedance area of the Smith Chart. In this paper, it is studied for the output matching circuit of the microwave oscillator to get the maximum output power. The maximum output point can be found by adjusting the position of moving short in the Tuner while the oscillator is operating after connect the 3-dB coupler Tuner to the oscillator without output matching circuit. To design the oscillator for the maximum output power can be done easily with the microstrip line which is realized from the measured S-parameters of Tuner. In compare the oscillator by the existing method with another one by the suggested method in this paper, the first one has 6.45 dBm output power and second one has 9.71 dBm which is 3.26 dBm higher than the first one at the oscillation frequency 1.0338 GHz.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.889-898
• /
• 2016

Virtual Bass System (VBS) is widely used to extend the lower frequency limit of small loudspeakers, which generates harmonics of a fundamental frequency. The perceptual quality of the VBS is highly dependent on the harmonic weighting strategy. There have been several weighting methods, including exponential attenuation and timbre matching. However, it is essential to match phases between harmonics in the original signal and generate harmonics to precisely convey the weighting strategy. This paper shows the limitations of the previous harmonic weighting schemes and proposes a new harmonic weighting scheme. The proposed weighting scheme proposes phase matching between the original and generated harmonics and varies the slope of the attenuation weighting dynamically according to the missing fundamental frequency. Objective and subjective tests show that the proposed harmonic weighting scheme provides more natural and effective bass perception in a limited situation than the conventional schemes, which implies that the phase matching is essential for the high quality bass enhancement.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.63-67
• /
• 1995

This paper proposes a new frequency offset correction technique for OFDM receivers on a frequency-selective fading channel. The frequency offset in the OFDM signals is known to introduce an interchannel interference among the multiple subcarriers, which degrades the receiver performance severely. In order to reduce the frequency offset, this paper describes an algorithm with two stages: acquisition and tracking. At both stages the algorithm oversamples the received OFDM signals. At the acquisition stage the frequency offset is reduced to half or less than the intercarrier spacing by matching the sign patterns of even and odd samples. Next, at tracking stage the frequency offset is compensated by a frequency detector which is controlled by the correlation of the even and odd sample sets. From the results, it is found that the proposed algorithm can correct the frequency offset even if the initial offset exceeds one half of th eintercairrers spacing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.972-983
• /
• 1996

This paper proposes a new technique for frequency offset correction for OFDM systems on a frequency selective fading channel. Frequency offset in OFDM introduces interchannel interference among the multiple subcarriers of OFDM signal. To compensate the interference, this paper describes an algorithm with two stages:acquisition and tracking. At both stages, the proposed algorithm oversamples the received OFDM signal to obtain a couple of demodulated symbol sets. At acquisition stage the frequency offset is reduced to half or less of the intercarrier spacings by matching the sign pattern of each element of the sets. Next, at tracking stage the frequency offset is corrected with a frequency detector which is controlled by the correlation of the two sets. It is shown that the proposed algorithm can correct the frequency offset in the event of uncertainty in the initial offset that exceeds one half of the intercarrier spacing. In addition, the proposed algorithm is robust to transmitted symbols and channel characteristics by using oversampled symbol sets.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.210-213
• /
• 2000

In the closed range space, the parallel two CCD cameras are used to acquire a pair of stereo image. The acquired stereo image are computed with Wavelet Transform repeatedly and including the low frequency component, the image size of those are reduced. It is the pyramid structure. The optimum matching point is searched to the pixel. Then appling the optimum matching point to DLT, it extract the three - dimensional surface coordinate from a stereo image. The direct linear transformation(DLT) method is used to calibrate the stereo camera compute the coordinate on a three dimensional space. To find the parameters for the DLT method, 30 control points which marked on the cylinder type object are used. To improve the matching algorithm, the paper select the pyramid structure for Wavelet Transform. The acquired disparity information is used to represent the really three-dimensional surface coordinate.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.50-55
• /
• 2010

Orthogonal Frequency Division Multiplexing(OFDM) dual-hop systems can take full advantages of the techniques of both multi-hop communication and OFDM. To achievethis end, we propose a joint subcarrier matching, power allocation and bit loading algorithm operating under a total power constraint and the same Bit Error Rate(BER) threshold over all subcarriers. Simulation results demonstrated system throughput improvement compared to single-hop systems and dual-hop systems with different bit loading algorithms for each relay position, power constraint, and required BER.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.733-736
• /
• 1998

In this paper, we propose a new method for content-based retrieval system using wavelet transform and correlation, which has were used in signal processing and image compressing. The matching method is used not perfect matching but similar matching. Used feature vector is the lowest frequency(LL) itself, energy value, and edge information of 4-layer, after computng a 4-layer 2-D fast wavelet transform on image. By the proosed algorithm, we got the result that was faste rand more accurate than the traditional algorithm. Because used feature vector was compressed 256:1 over original image, retrieval speed was highly improved. By using correlation, moving object with size variation was reterieved without additional feature information.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.755-759
• /
• 2013

A broad-band underwater acoustic transducer that uses thickness vibration mode, derived from a disk type piezoelectric ceramic, has been proposed and designed for DVL (Doppler Velocity Log). Three different types of acoustic transducer were evaluated with respect to the transmitting voltage response, receiving voltage sensitivity and bandwidth of the transducer. The effect of the acoustic impedance matching layer and backing layer is discussed. The results demonstrated that three matching layer with lossy backing layer is the best configuration for underwater transducer. The trial underwater acoustic transducer with three matching layer has a frequency bandwidth of 55%, maximum transmitting voltage response of 200 dB and a maximum receiving voltage sensitivity of -187.3 dB.