• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.15-19
• /
• 2003

In this paper, we develop the Jeffreys' prior, reference priors and the probability matching priors for the intraclass correlation coefficient of a symmetric normal distribution. We next verify propriety of posterior distributions under those noninformative priors. We examine whether reference priors satisfy the probability matching criterion.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.587-597
• /
• 2007

본 연구는 IKONOS Geo레벨 스테레오 영상으로부터 DEM을 제작하기 위한 토지피복 특성별 정합영역 크기를 결정하고자 한다. 사용된 매칭기법은 상관계수를 이용한 영역기반정합 기법을 적용하였고, 탐색영역을 최소화하기 위해 외부표정요소를 구한 후, 이로부터 정합선을 수립하여 정합하였다. 실험은 산림, 논 밭, 수계, 도심지의 4가지 토지피복 특성별로 수행되어졌으며, 토지피복별 평균 상관계수, 칼럼 라인의 시차영상을 분석한 후, 실험 영상에서 최적의 정합영역 크기를 선정하였다. 실험결과, 산림지역은 $119{\times}119$화소, 논 밭 지역은 $51{\times}51$화소, 물 지역은 $81{\times}81$화소, 도심지는 $21{\times}21$화소가 DEM 제작을 위한 가장 적절한 정합영역 크기로 선정되었다.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.172-178
• /
• 2016

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and is often applied to structural health monitoring and large scale human-computer interface (HCI) systems. The LTM method utilizes a certain measure of similarity between two time signals. The correlation coefficient is most widely used for this purpose, and the group delay based method is recently proposed to improve the accuracy of finding the best matching pair of signals. In practice, one of key essential consideration for implementing the LTM method is to guarantee that a sufficient number of vibration modes must be contained in the measured signal, and yet the lower sampling rate is needed for a real-time implementation. In this paper, the properties of correlation coefficient and group delay with respect to the number of vibration modes are investigated. A few important results are obtained through extensive computer simulations and experiments. If the number of vibration modes contained in the measured signal is more than four it is sufficient for the correlation based LTM method, while the group delay based LTM method requires smaller number of vibration modes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.568-571
• /
• 2005

This paper introduces a correlation-based surface matching algorithm that can be used to reconstruct the surface topography of an object that is scanned from multiple overlapping regions by an AFM. The image matching technique is applied to two neighboring images intentionally overlapped with each other. To account for the inaccuracy of the coarse stage implemented in AFM, all the six axes including the rotational degrees of freedom are successively matched to maximize the correlation coefficient. The results show that the proposed 6-axes image matching method is useful for expanding the measurement range of AFM.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.85-91
• /
• 2015

전력선 통신에서 사용되는 비접촉식 커플러의 신호 전달 특성을 향상시키기 위한 비접촉식 커플러의 구조와 자기장 결합에 대한 연구를 수행하였다. 비접촉식 커플러의 결합 구조를 분석하였고, Rogowski 코일을 이용한 커플러와 자성체 코어를 이용한 커플러를 제작하여 구조에 따른 신호 전달 특성을 분석하였다. 집중 정수 소자와 임피던스 트랜스포머를 이용한 임피던스 매칭법을 제안하여 협대역과 광대역에서 신호 전달 특성을 향상시켰고 전달 신호의 크기는 대역폭과 트레이드오프가 있음을 보였다. 본 연구는 추후 부하 변동에 따른 임피던스 매칭 연구에 도움을 줄 수 있다.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.206-208
• /
• 2000

0.65 mol% MgO-doped LiNbO$_3$single crystals were grown by CZ method. The obtained single crystals were colorless and transparent. Noncritically phase-matched second harmonic generation (SHG) of 532-nm radiation from 1064-nm in MgO-doped LiNbO$_3$has been investigated by using pulsed Nd:YAG laser. The phase-matching temperature was room temperature. SHG conversion efficiencies were typically achieved higher than 50% at the phase-matching temperature with no photorefractive damage in the region of fundamental power density which was used in this experiment. The thermo-birefringence coefficient and the electro-birefringence coefficient of SHG were calculated from the temperature phase-matching profile with the electric field.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.609-615
• /
• 2016

Measuring similarity between two signals is a key element of the location template matching (LTM) method which is one of impact source localization technique. As a measure of similarity, the correlation coefficient is most widely used, and the group delay based method is recently proposed to improve the accuracy of finding the impact source. In practice, the LTM method assumes that the similarity between two signals decreases as the distance between two corresponding impact points increases, where the distance between two neighboring impact points defines the grid spacing. In this paper, it is shown that this assumption is not always true but the correlation coefficients fluctuate forming a main robe and many side robes as the distance between two neighboring impact points increases. On the other hand, the standard deviation of group delay sharply increases with a small increase of the grid spacing. These are demonstrated by using a simple cantilever beam. Based on these findings, an optimal way of implementing the LTM method may be suggested by combining the correlation coefficient and the group delay based approaches.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1343-1358
• /
• 2020

In the stagewise arithmetic orthogonal matching pursuit algorithm, the weak threshold used in sparsity estimation is determined via maximum iterations. Different maximum iterations correspond to different thresholds and affect the performance of the algorithm. To solve this problem, we propose an improved variable weak threshold based on the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the residual error value to control the weak threshold. When the residual value decreases, the threshold value continuously increases, so that the atoms contained in the atomic set are closer to the real sparsity value, making it possible to improve the reconstruction accuracy. In addition, we improved the generalized Jaccard coefficient in order to replace the inner product method that is used in the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the covariance to replace the joint expectation for two variables based on the generalized Jaccard coefficient. The improved generalized Jaccard coefficient can be used to generate a more accurate calculation of the correlation between the measurement matrixes. In addition, the residual is more accurate, which can reduce the possibility of selecting the wrong atoms. We demonstrate using simulations that the proposed algorithm produces a better reconstruction result in the reconstruction of a one-dimensional signal and two-dimensional image signal.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제6권4호
• /
• pp.73-81
• /
• 2001

산업과 생활수준의 발달로 지하수 사용량은 증가되어 가고 있다. 지하수 해석을 위해서 대수층의 특성변수의 결정은 매우 중요하다. 대수층의 해석과 고전적인 도식적 방법의 주관성을 제거하기 위해 여러 가지 수치방법이 개발되어 왔다. Theis의 관계곡선과 현장 자료를 토대로 유도된 SM방법이 누수대수층과 비누수대수층에 대한 해석을 위해 사용되어 왔다. 본 논문에서는 SM방법을 토대로 전달계수, 저류계수, 누수계수를 결정하기 위한 자동화된 포트란 프로그램을 개발하여 제시하였다. 기존의 양수시험 자료를 토대로 개선된 SM방법의 결과는 기존의 SM방법의 결과와 거의 일치하고 있다.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.43-48
• /
• 2020

The demand for stable plasma has been on the rise because of the increased delivery power amount in the chamber for improving productivity, and fast and accurate plasma impedance matching become a crucial performance measure for radio frequency (RF) power system in semiconductor manufacturing equipment. In this paper, the overall impedance matching was understood, and voltage and current values were extracted with voltage - current (VI) probe to measure plasma impedance in real-time. Actual matching data were analyzed to derive calibration coefficient for V and I measurements to understand the characteristics of VI probe, and we demonstrated the tendency of RF impedance matching according to changes in load impedance. This preliminary empirical research can contribute to fast RF matching as well as advanced equipment control for the next level of detailed investigation on embedded system based-RF matching controller.