• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.265-270
• /
• 2002

The determination of DNA hybridization reaction can apply the molecular biology research, clinic diagnostics, bioengineering, environment monitoring, food science and application area. So, the improvement of DNA hybridization detection method is very important for the determination of this hybridization reaction. Several molecular biological techniques require accurate predictions of matched versus mismatched hybridization thermodynamics, such as PCR, sequencing by hybridization, gene diagnostics and antisense oligonucleotide probes. In addition, recent developments of oligonucleotide chip arrays as means for biochemical assays and DNA sequencing requires accurate knowledge of hybridization thermodynamics and population ratios at matched and mismatched target sites. In this study, we report the characteristics of the probe and matched, mismatched target oligonucleotide hybridization reaction using thermodynamic method. Thermodynamic of 5 oligonucleotides with central and terminal mismatch sequences were obtained by measured UV-absorbance as a function of temperature. The data show that the nearest-neighbor base-pair model is adequate for predicting thermodynamics of oligonucleotides with average deviations for $\Delta$H$^{0}$ , $\Delta$S$^{0}$ , $\Delta$G$_{37}$ $^{0}$ and T$_{m}$, respectively.>$^{0}$ and T$_{m}$, respectively.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.357-365
• /
• 2004

Effect of artificial circulation on amelioration of water quality in Yeoncho Lake was analyzed using summer data between 1991-2002. Two sites, intake tower area where aeration systems are concentrated in and near the inlet of reservoir were selected for comparison in this study. Summer averages between may and september Showed that aeration system might be beneficial in the improvement of water quality of BOD5, COD, and TN while Chl-a concentration and transparency did show opposite pattems. Wilcoxon's singed rank test for matched pair indicated slight increase of BOD5 and COD concentrations in the vicinity of intake tower while other variables did not show any significant differences from data of inlet of reservoir. During the study, it was found that the following subjects need to be investigated for more detailed analysis. 1) Dynamic pollutant loading from outside and inside the lake, 2) Biological, Chemical and Physical lake data when aeration systems are in and not in operation and 3) Radius of influence of aeration system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.168-172
• /
• 2003

This paper analyzes the output noise and the noise figure of common source MOSFET pair each input of which is separately driven in the different frequencies. This analysis is performed for concurrent dual band cascode CMOS LNA with double inputs and single output fabricated in $0.18{\mu}m$ CMOS process. Since both inputs and output are matched to near $50{\Omega}$ using on-chip inductors, the measured noise figures are much higher than those of usual CMOS LNA. But, the main concern of this paper is focused on the added noise features due to the other channel common source stage. The dual-band LNA results in noise figure of 4.54dB at 2.14GHz and 6.03dB at 5.25GHz for selectable operation and 7.44dB and 6.58dB for concurrent operation. The noise analysis explains why the added noise at each band shows so large difference.

• 전자공학회논문지
• /
• 제52권1호
• /
• pp.102-110
• /
• 2015

본 논문은 동일한 특징을 사용하여 정형 객체와 비정형 객체 영상들을 정합할 수 있는 적응형 정합 방법을 제안한다. 이를 위한 방법으로 우선 기하학적 검증으로 두 영상의 정합 여부를 결정하고 정합 정보를 생성한다. 그리고 정합 정보의 통계적 분석을 통해 비정형 정합 쌍과 비정합 정합 쌍을 분류하는 결정 경계를 구한다. 제안된 방법의 성능 평가 결과는 기존의 방법과 비교하였을 때, 복잡도는 낮았으며, 정합 성공률과 정확도는 높아짐을 보여주었다.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.291-299
• /
• 2003

본 연구에서는 연속체해석을 토대로, 병렬코아를 갖는 아웃리거구조물의 수평하중에 대한 응력과 변위를 구하기 위한 방법을 제안하였고, 아웃리거의 위치에 따른 구조물의 거동에 대해 연구하였다. 아웃리거와 코아가 만나는 위치에서 코아의 회전병위가 아웃리거의 회전변위와 일치한다는 적합조건으로부터 아웃리거의 구속모멘트, 코아의 휨모멘트, 기둥의 축방향력, 그리고 구조물의 수평변위 등을 유도하였다. 구조모델들을 이용하여 MIDAS-GEN 프로그램에 의한 결과와 비교하였고, 병렬코아를 갖는 아웃리거구조물에 대해 만족할만한 결과를 얻었다. 구조물 최상단의 수평변위는 코아의 위치보다는 아웃리거의 위치에 의해 크게 영향을 받는 것으로 조사되었다. 비록, 이 논문에서 제시된 공식들이 이상적인 아웃리거구조물에 대한 것이지만 병렬코아를 갖는 실제 아웃리거구조물의 응력과 변위의 근사치를 추정하고, 구조물의 거동을 예측하기 위한 수단으로 유용하게 사용될 수 있을 것이다.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.916-922
• /
• 2023

An abnormal shape of Bathyraja brachyurops was first reported from the catch of a bottom trawl in the southwest Atlantic Ocean in June 2022. Both pectoral fins of the specimen did not fuse with the head, resulting in a horn-like structure separated from the sides of the eyes. Analysis of mitochondrial DNA cytochrome c oxidase subunit I sequences showed that our specimen was perfectly matched to Bathyraja brachyurops registered with the National Center for Biotechnology Information. Our specimen possessed the following morphological features: a pair of flexible but elongated and pointed horns on the head; rough dorsal disc, densely covered with numerous small denticles on the head, anterior margin of pectoral fins and median line of the disc; a thorn between the first and second dorsal fins; and a pair of large ocelli at the base of pectoral fins. Unlike the normal B. brachyurops, our specimen had a slender clasper and no nuchal thorns, which may be related to the morphological abnormality. The horn-like structure on the head may be owing to the lack of fusion between the pectoral fins and head during early embryonic development.

• 소성∙가공
• /
• 제13권2호
• /
• pp.129-136
• /
• 2004

Recently, instead of a matched die forming method requiring a high cost and long delivery term, a multi-point dieless forming method using a pair of matrix type punch array as flexible dies has been developed. Since the conventional multi-point dieless forming method has some disadvantages of difficulty in precise punch control and high-cost of equipment, a new concept of multi-point dieless forming method combined with an elasto-forming method has been suggested in this study. For optimal selection of elastomers, compression tests of rubbers, polyethylene and foams were carried out together with FEM analysis of the deformation behavior during sheet forming process using a rigid punch and elastomers. Compressive strain was concentrated on the upper central area of the elastomer under the punch, and the rubber exhibited higher concentration of the compressive strain than foams. Two-dimensional curved surface was formed successfully by the multi-point elasto-dieless forming method using an optimal combination of rubber and foam materials.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 제4회 박판성형 심포지엄
• /
• pp.21-28
• /
• 2003

Recently, instead of a matched die forming method requiring a high cost and long deliverly ten a multi-point dieless forming method using a pair of matrix type punch array as flexible dies has been developed. As this multi-point dieless forming method has some disadvantage of difficulty in precise punch control and high-cost of equipment, a new concept of multi-point dieless forming method combined with elastomer forming was suggested in this study. For optimal selection of elastomers, compression tests of rubbers, polyethylene and foams were carried out together with FEM analysis of the deformation behavior during sheet forming process using a rigid punch and elastomers. Compressive strain was concentrated on the upper central area of the elastomer under the punch, and the rubber exhibited higher concentration of the compressive strain than foams. Two-dimensional curved surface was formed successfully by the multi-point elasto-dieless forming method using an optimal combination of a rubber and foam.

• Toxicological Research
• /
• 제20권1호
• /
• pp.49-53
• /
• 2004

The genetic basis of hypertension is complex, and has been considered to be associated with the dopamine D2 receptor gene (DD2R). Because association studies using the candidate gene approach may provide important clues regarding the pathogenesis of hypertension and establish basis for further study, we performed the association study on the relationship between genetic polymorphisms in the DD2R gene and hypertension in Koreans. Eighty nine patients with hypertension and 86 age-matched subjects with normal blood pressure were enrolled. Genomic DNA was extracted from peripheral blood leukocytes. PCR-RFLP analysis was performed to detect the three polymorphic Taq I sites in the DD2R gene. There were no significant differences in genotype, allele and haplotype distributions of any polymorphisms in the DD2R gene between two groups, respectively (P>0.05), although significant linkage disequilibriums among these polymorphic sites were detected by pair-wise analysis (P<0.05). Therefore, our negative result suggest that the three Taq I RFLPs in the DD2R gene were not significantly associated with hypertension in Koreans.

• Journal of Information Processing Systems
• /
• 제8권3호
• /
• pp.389-398
• /
• 2012

Texture is an important visual feature for image analysis. Many approaches have been proposed to model and analyze texture features. Although these approaches significantly contribute to various image-based applications, most of these methods are sensitive to the changes in the scale and orientation of the texture pattern. Because textures vary in scale and orientations frequently, this easily leads to pattern mismatching if the features are compared to each other without considering the scale and/or orientation of textures. This paper suggests an Orientation Matching Scheme (OMS) to ease the problem of mismatching rotated patterns. In OMS, a pair of texture features will be compared to each other at various orientations to identify the best matched direction for comparison. A database including rotated texture images was generated for experiments. A synthetic retrieving experiment was conducted on the generated database to examine the performance of the proposed scheme. We also applied OMS to the similarity computation in a K-means clustering algorithm. The purpose of using K-means is to examine the scheme exhaustively in unpromising conditions, where initialized seeds are randomly selected and algorithms work heuristically. Results from both types of experiments show that the proposed OMS can help improve the performance when dealing with rotated patterns.