• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.129-137
• /
• 2017

PURPOSES : The purpose of this study is to develop bridge deck concrete materials based on ordinary Portland cement concrete, and to evaluate the applicability of the developed materials through material properties tests. METHODS : For field implementation, raw material (cement, fine aggregate, and coarse aggregate) properties, fresh concrete properties (slump and air content), strength (compressive, flexural and bond strength) gain, and durability (freeze-thaw resistance, scaling resistance, and rapid chloride penetrating resistance) performance were evaluated in the laboratory. RESULTS : For the selected binder content of $410kg/m^3$, W/B = 0.42, and S/a = 0.48, the following material performance results were obtained. Considering the capacity of the deck finisher, a minimum slump of 150 mm was required. At least 6 % of air content was obtained to resist freeze-thaw damage. In terms of strength, 51.28 MPa of compressive strength, 7.41 MPa of flexural strength, and 2.56 MPa of bond strength at 28 days after construction were obtained. A total of 94.9 % of the relative dynamic modulus of elasticity after 300 cycles of freeze-thaw resistance testing and $0.0056kg/m^2$ of weight loss in a scaling resistance test were measured. However, in a chloride ion penetration resistance test, the result of 3,356 Coulomb, which exceeds the threshold value of the standard specification (1000 Coulomb at 56 days) was observed. CONCLUSIONS : Instead of using high-performance modified bridge deck materials such as latex or silica fume, we developed an optimum mix design based on ordinary Portland cement concrete. A test construction was carried out at ramp bridge B (bridge length = 111 m) in Gim Jai City. Immediately after the concrete was poured, the curing compound was applied, and then wet mat curing was applied for 28 days. Considering the fact that cracks did not occur during the monitoring period, the applicability of the developed material is considered to be high.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.175-194
• /
• 1979

The soil organic matter contents in arable land are generally low in Korea. Thus it is generally agreed that the application of organic materials to soils would be much beneficial. Present paper is a review on the effectiveness of organic mat ter application in uplands and lowlands. 1. The effect of organic matter application in uplands are of more clear and simple to explain as compared to that in lowlands. In uplands, appropriate application of organic matters such as compost and various crops residues improves the physical properties of soils leasing to increased water holding capacity, better aeration, and decrease in soil erosion. 2. In lowland, rice soils under water logged conditions the effect of organic matter application on rice yield is not straight borward and demands more refined knowledges for the interpretation of it. 3. It is found that the application of compost in rice soils is more effective when nitrogen fertilizer application is limited it dicating that nitrogen contained in the organic maerials can become available to rice plant and plays an important role for increased yield of rice under the condition where nitrogen fertilizer supply is limited. 4. Application of organic matter does not always bring about the desirable effects. Very often the organic matter application results in more intensive soil reduction leading to the accumulation of harmful substances which would can cancel out the positive effects of organic matter. This is partiunlarly true in poorly drained soils. 5. Rice straw or compost, when applied rice soils, supply sizeable amounts of available silicate to rice plant resulting in yield increase. 6. Although the effectiveness of organic matter application on rice yield in short term experiments is not consistent due to many reasons, the long term effect of organic matter is significant. 7. The term of the $O.M/SiO_2$ ratio in rice soils can serve as a criterion for the judgement of whether organic matter or silicate fertilizer is needed to be applied in a certain soil.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.518-527
• /
• 2015

In this study, nanocomposite mats consisting of cellulose nanocrystals (CNCs) and poly(lactic acide) (PLA) were electrospun from a suspension mixture consisting of tetrahydrofuran at room temperature. Morphology study showed that fibers of electrospun composite mats were aligned in three dimensional surface along the fiber long-axis. Average diameter of the electrospun fibers decreased with an increase in the CNC loading level. Tensile strength of the electrospun fibers mat decreased with an increase in the CNC loading level because of bead formation in the formed fibers and low interfacial bond strength between PLA and CNC. Meanwhile, thermal stability of the electrospun nanocomposite mats was effectively improved as the amount of CNC increased.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.363-375
• /
• 2011

Recently, Water quiality of urban river largely have gotten better by virtue of sewer pipe laying and sewage treatment plants construction. or the various contaminants which is flowed in into river have generated underwater ecosystem disturbance and red tide by lack of sewage and waste water disposal facilities. With tidal river, taehwa river of ulsan metropolitan city has large river width and gradual stream bed gradient at the dry and storage period. Moreover, the flow is paralyzed due to the bridge pier protection work, consist of the mat foundation which is about 1.2km from two bridge and the contaminant is accumulated. it is caused by of the red tide generated from the several years or it activates. In this study, When flow area is largest by changing independent footing of bridge pier of two bridges and using RMA2 model, we hydraulically analyzed a variable breadth of velocity and discharge. Consequently, flow rate increased the maximum 103%, discharge was exposed to increase the maximum 61%. Directly this cannot extinguish the red tide but suppresses the red tide occurrence or can reduce. And it is determined to prevent the depositioning of the contaminant and can control fundamentally the red tide occurrence cause.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.199-210
• /
• 2012

In this study, a pull-out strength increasement of grasses was tested in field and the relationship between a weight of root and pull-out strength was established. The tested grasses were commmon reed, reed and sedge which were cultivated by mat-type like turf and used for revegetation of bank. The shear stress of soil at a section can be discribed as a function of root area and pull-out strength, therefore the result of this study will be used as a foundational data for reinforcing the shear stress of the revegetated bank. The heavier weight of root increased, the stronger shear stress was for all grasses. But the relationship between the weight and the shear stress were different by a kind of grass. The difference between common reed, sedge and reed is due to difference of growth and propagation. A reed propagates by subterranean stem and a root weight and pull-out strength are linearly increased by root and growth of subterranean stem.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.4
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.259-262
• /
• 1999

The copper-catalyzed reaction of silicon with methanol was carried out in a mixed bed reactor to obtain tetramethyl orthosilicate (TMOS). In order to determine the kinetics of the reaction per active site on the silicon surface, a flow rate transition technique was employed. A kinetic study showed the reaction was in Linear relationship with the amount of contact mass and independent on the concentration of methanol. This result indicated that the rate-determining step was not the chemical process involving methanol, but the formation of silicon intermediate on the contact mass. On the basis of optimum experimental conditions, the maximum TMOS formation rate per g-silicon is 0.030 (g/min) at $210^{\circ}C$, in which activation energy was 8.5 kcal/mol and reaction rate equation was $k=4.09{\times}10^4\;exp$ ($-4.73{\times}10^3/T$).

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1048-1053
• /
• 1997

Modified mordenites by HF treatement, which have different $SiO_2/Al_2O_3$ ratio, and those mixed with $\gamma$-alumina are prepared and used for catalytic cracking of triphenylmethane(TPM) in micro-activity tester(MAT). Dealumination of mordenites decreased the acid content but developed secondary mesopores. The conversion and the selectivity of benzene over modified mordenites with the mesopores were increased. However, for the further dealuminated mordenites, they decreased due to the destruction of pore structure and low acid amount. Accordingly, the maximum cracking activity and the maximum selectivity of benzene were obtained about 17 $SiO_2/Al_2O_3$ ratio of modified mordenites. The modified mordenites mixed with alumina enhanced the cracking activity of TPM compared with the pure mordenites. It can be explained that TPM is cracked at active sites with in large pores of alumina firstly and further cracked into small molecules in zeolite pores as step mechanism of catalytic cracking.

• Journal of Dairy Science and Biotechnology
• /
• v.36 no.2
• /
• pp.81-94
• /
• 2018

This review discusses the characteristics of major lignans and related studies and provides a basis for future studies. Lignans are present in various food products consumed daily, such as flaxseed and other seeds, vegetables, fruits, and beverages including coffee, tea, and wine. Lignans are natural phytoestrogens with a structure similar to that of secoisolariciresinol (Seco), mataireinol (Mat), pinoresinol (Pin), medioresinol (Med), lariciresinol (Lari), and syringaresinol, which is then converted to enterodiol (END) and enterolactone (ENL), which are mammalian lignans and the primary biologically active enterolignans, by the intestinal microflora. The associations between lignans and a decreased risk of cardiovascular disease are promising; however, they are not yet well-established, probably owing to low lignan intake in habitual Western diets. Nonetheless, these associations were more prominent at the higher doses in interventional studies. Many studies on humans and animals have reported the benefits of lignan consumption in protecting against CVD and metabolic syndrome by reducing lipid and glucose concentrations. END and ENL reportedly exert protective effects including phytoestrogenic, antioxidant, anti-inflammatory, and anticancer effects through various mechanisms. Moreover, lignans reportedly exert beneficial effects in breast, colon, and prostate cancer and osteoporosis have reported that. However, future studies are required to confirm the association between lignan and disease.

• Mass Spectrometry Letters
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

China's rapid economic growth has resulted in significant environmental side effects. Therefore, China has been interested in reducing her dependence on foreign oil and gas by developing technologies needed for hydrogen, in addition to her increasing energy mix of nuclear and renewable energy form, such as solar and wind power. There are three isotopes of hydrogen, i.e. protium (P or H), deuterium (D), and tritium (T). Both deuterium and tritium are important materials in nuclear fuel cycle industry. Tritium is one of the critical radioactive nuclides. Planning for and implementing contamination control as a part of normal operation and maintenance activities is an important function in any hydrogen facility, especially tritium facility. The development of hydrogen isotopes analysis is the key issues in this area. Mass spectrometry (MS) with medium (about 600) and high resolution (> 1,400) is commercially available; however, the routine analysis of hydrogen isotopes is done with low-resolution MS (< 200) in China. This paper summarizes the progress of MS measurement technology for hydrogen isotope abundance in China, focusing on our lab's research program and technical status. An analyzing method has been introduced for accurate measurement of tritium abundance in the H.D.T system by low resolution MAT-253 MS. The quotient of compression ratio coefficient is determined by building up equipment for laboratory-scale preparation of secondary standard gases and by considering the difference in sensitivity between hydrogen isotopes. The results show that the measured value is reproducible within the relative error range of 0.8% for gas samples of different tritium abundance.