• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.84-92
• /
• 1997

The purpose of this study is to develop a geometric error model and path compensation algorithm for rotating axes of the 5-axis machine tools, by a method to calibrate a rotary table using one master ball and three LVDTs. It was developed a new methodology to measure 3 translation errors of the rotary table and with a compensation procedure for setup errors of the master ball. The method is experimentally verified using a ball-table and on-machine inspection method. The results showed that the geometric error models with the path compensation strategy can be practically used as a means for improving the accuracy of the machine tools with rotary table.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.279-285
• /
• 1993

This paper presents a precision automatic measuring system for ball screw Pitch. Ball screw is mounted on a precision indexing table, and the ball screw pitch is measured via magnetic scale, where the indexing and measurement are performed by a PC. For precision indexing of ball screw, direct driven motor is coupled to the designed dead and live centers; the performance of the centers are assessed with a precision master sylinder,such as radial motion,tilt motion, and axial motions. An error compensation model is constructed for the measurement system of ball screw pitch, where the error motions of indexing system as well as the scale measurement system are combined to give the measurement error for the ball screw. The developed system proposes an automated precision measurement system for manufacturers and users of ball screw.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.85.5-85
• /
• 2002

The Master-Slave manipulator is generally used as a remote handling device in the hot cell, in which the high level radio-active materials such as spent fuels are handled. This study describes a workspace mapping algorithm for a kinematically dissimilar master-slave system The algorithm provides the operator to guide the slave's end effector into unreachable regions which can appear due to the mismatch of workspace between the master and slave manipulator. A spaceball was used for the universal master device, and it can detect the slight fingertip force applied on the ball and also resolve the applied force. The spaceball device was also used to move 3D images instantaneously and simultaneou...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.636-642
• /
• 1996

본 연구는 4축 또는 5축 NC 공작기계에 사용되는 Rotary Table의 오차를 측정하고 이를 보정하기 위한 연구이다. 먼저 일반적인 Rotary Table에 대한 오차모델이 설정되었으며, Rotary Table에서 존재하는 6가지의 오차를 각각 측정하였다. 측정방법은 3개의 길이오차는 1 개의 정밀볼(Master ball)과 3개의 LVDT, 3개의 각도 오차는 6각 폴리곤과 Autocollimator를 사용하여 측정하였다. 측정된 오차 성분들은 오차모델을 이용하여 보상치를 계산하였으며, 이 값은 추후 원래의 측정오차와 비교하는 방법으로 모델의 정확성을 검증할 것이다. NC 공작기계상에서 Rotary Table의 실제 보상 실험을 위하여 30$^{\circ}$간격으로 정밀한 볼이 장착된 볼-테이블을 설계하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.2
• /
• pp.56-63
• /
• 2001

The objective of this research is to develop a measurement error compensation method for On-Machine Measurement (OMM) process based on a closed-loop configuration. Geometric errors of vertical machining center are measured using ball-bar system, and probing errors are measured using master ball. The errors are represented using homogeneous trans-formation matrices and the closed-loop configuration method is applied to calculate 3-dimensional errors. To verify the effectiveness of the method proposed in this research, compensated results are compared to the data using CMM process, and the results are analyzed. The results show the proposed method can be applied in OMM process to make the measured data more reliable.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.193-198
• /
• 2009

Generally a TV broadcast video of ball sports is composed from those of multiple cameras strategically mounted around a stadium under the supervision of a master director. The director decides which camera the current view should be from and how the camera work should be. In this paper, such a decision rule is based on the 3D location of ball which is the result of multi-view tracking. While current TV sports broadcast are accompanied with professional cameramen and expensive equipments, our system requires few video cameras and no cameraman. The resulted videos were stable and informative enough to convey the flow of a match.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.45-52
• /
• 1996

It is one of the important causes that the precision of the thread grinder decide the machining errors of the ball screw. The approach described in this study demonstrates how the dominant causes of the inaccuracies in thread grinding system can be determined. To evaluate the machining error of thread grinder, rotary encoder is allocated to spindle shaft and master screw for measuring the rotational transfer error between spindle shaft and master screw and the laser measuring system is used for checking the movement error.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.129-136
• /
• 1997

The automated ball indentation(ABI) test was utilized to develop a semi-nondestructive method for estimating the fracture toughness( $K_{JC}$ ) in the transition temperature range. The key concept of the method is that the indentation deformation energy to the load at which the mean ball-specimen contact pressure reaches the fracture stress is related to the fracture energy of the material. ABI tests were performed for the reactor pressure vessel(RPV) base and weld metals at the temperatures of-15$0^{\circ}C$~$0^{\circ}C$ and the fracture toughness (estimated $K_{JC}$ ) was calculated from the indentation load-depth data. For all steels the temperature dependence of the estimated fracture toughness was almost the same as that ASTM $K_{JC}$ master curve The reference temperatures( $T_{o}$)of the steels were determined form the estimated $K_{JC}$ versus temperature curves. The reference temperature was well correlated with the index temperature of 41J Charpy impact energy( $T_{41J}$).).).