• Journal of Acupuncture Research
• /
• v.23 no.5
• /
• pp.177-185
• /
• 2006

Objectives : To observe the effect of acupuncture treatment and western medical treatment on frozen shoulder patients. Methods : 39 voluntary patients were randomly assigned to the Eastern treatment group(E group, n=22) and the Western treatment group(W group, n=17). The E group received acupuncture treatment on LI15, TE14, GB21 and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for 4 weeks. The W group received suprascapular nerve block, subacromial injection and trigger point injection, twice a week for 4 weeks. Both groups were instructed to practice self exercise during their daily lives. Evaluations were made before treatment and after treatment using Constant Shoulder Assessment(CSA), Shoulder Pain and Disability Index(SPADI) and the patient's satisfaction concerning the treatment was measured by Visual Analogue Scale(VAS). The obtained data were analyzed and compared. Results : The E group showed significant improvement(p<0.05) according to the CSA and SPADI. The patient's satisfaction scored 5.67 on a scale of 10. The W group showed significant improvement(p<0.05) according to the CSA and SPADI. The patient's satisfaction scored 7.73. But the difference between the two groups were insignificant according to CSA and SPADI. Conclusion : Both acupuncture and nerve block treatment significantly improved frozen shoulder. But the difference of the two treatments was insignificant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.545-559
• /
• 2002

There has been increasing use of IPS Empress $2^{(R)}$ owing to easy fabrication method, high esthetics similar to natural teeth, good marginal accuracy, and sufficient fracture strength. However, in clinical application, although a luting agent and the tooth cementation bonding procedure influence the marginal accuracy and fracture strength restoration, there has been a controversy in the selection of proper luting agent. This study was to measure the marginal fidelites and fracture strength of IPS Empress crowns according to three cement types, Protec $cem^{(R)}$, Variolink $II^{(R)}$ and Panavia $21^{(R)}$. After construction of 12 experimental dies for each group, IPS Empress $2^{(R)}$ crowns were fabricated and luted the metal master die prepartion of the maxillary right premolar. Marginal gaps before cementation and after cementation were measured. Buccal incline on the functional cusp of specimens were loaded until the catastrophic failure and fracture strength was measured. The results of this study were as follows: 1. The range of gap was $34.04{\pm}4.84{\mu}m$ before cementation and $37.88{\pm}5.00{\mu}m$ after cementation, which showed significant difference by paired t-test (p<0.05). The difference in the results from marginal accuracy according to measuring point proved to be not statistically significant by two-way ANOVA test (p>0.05). 2. The difference in the results from marginal accuracy according to three cement types Proved that The Variolink $II^{(R)}$ cement group had the least gap, $35.43{\pm}5.03{\mu}m$, and showed superior marginal accuracy while there existed statistic significance in Protec $cem^{(R)}$ cement group, $39.06{\pm}4.41{\mu}m$ or Panavia $21^{(R)}$ cement group, $39.16{\pm}4.39{\mu}m$ by two-way ANOVA test & multiple range test (p<0.05). 3. The difference in the results from fractures strength testing according to three cement type groups proved to be statistically significant (p<0.05). The Variolink $II^{(R)}$ cement group shows highest fracture strength of $1257.33{\pm}226.77N$, Panavia $21^{(R)}$ cement group has $1098.08{\pm}138.45N$, and Protec $cem^{(R)}$ cement group represents the lowest fracture strength of $926.75{\pm}115.75N$. 4. Three different cement groups of different components showed acceptable marginal fidelity and fracture strength. It is concluded that IPS Empress $2^{(R)}$ crowns luted using Variolink $II^{(R)}$ cement group had stronger fracture strength and smaller marginal gap than the other cement groups. Although Variolink $II^{(R)}$ resin cement seemed acceptable to clinical applications in IPS Empress $2^{(R)}$ system, the IPS Empress $2^{(R)}$ system still requires long-term research due to the lack of data in clinical applications.

• Journal of Acupuncture Research
• /
• v.30 no.3
• /
• pp.101-107
• /
• 2013

Objectives : The purpose of this study is to investigate the correlation between acupuncture therapy on knee osteoarthritis and BMI. Methods : Data on assessment measurements of knee osteoarthritis and obesity were obtained from 31 patients suffering from knee osteoarthritis from May, 2011 to September, 2012. The assesment measurements consisted of body mass index(BMI), visual analogue scale(VAS) and Western Ontario and McMaster Universities(WOMAC) index. Statistical correlations among assessment measurements were evaluated by examining the Pearson's correlation coefficients. Results : 1. The average age of all patients was $58.87{\pm}9.48$(male : $63.67{\pm}11.34$, female : $57.72{\pm}8.86$). 2. The average BMI of all patients was $25.41{\pm}3.06kg/m^2$. According to clinical definition of obesity by Korean Society for the Study of Obesity, 25.81% of all patients was within normal weight, 25.81% was overweight, 38.71% was obesity and 9.67% was morbid obesity. 3. There were no significant correlations in statistics among assessment measurements. Conclusions : There is significant correlation between knee osteoarthritis and obesity according to many clinical and experimental researches. So more studies on correlation between knee osteoarthritis and obesity and development of assessment measurement are needed.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.165-170
• /
• 1992

The creep behavior of gels made with $30{\sim}45%$ gelatinized rice starch was measured over a wide range of temperature. Compressive creep curves of rice starch gels conformed to a six element mechanical model consisting of one Hookean, two Voigt and one Newtonian component. The creep compliance of gels decreased with increasing starch concentrations. Among viscoelastic constants of the mechanical model, elastic modulus was mainly influenced by the change of starch concentrations. The concentration-invariant compliance curve was obtained by reduction to 38% using reduction parameter $a_{c}$. The creep compliance curves of 45% starch gels increased with temperature, which indicated that rice starch gels became softer and less rigid with increasing temperature. When the compliance at $20^{\circ}C$ was set as a reference curve, creep compliance data for 45% gels at various temperature could be superimposed as a continuous smooth curve. The apparent activation energies of 45% rice starch gels calculated by the modified WLF equation were not intrinsic, but decreased as temperature increased.

• Journal of muscle and joint health
• /
• v.17 no.2
• /
• pp.203-211
• /
• 2010

Purpose: We aimed to test the validity of the EQ-5D (Euro-Quality of Life-5 Dimension), a brief and simple instrument, in measuring health related quality of life in the patients with osteoarthritis. Methods: 183 participants attending the education programs for osteoarthritis patients at the Health Centers located in Seoul and Gyunggi province area during the periods of June to December in 2009 were interviewed with the EQ-5D and KWOMAC (Korean version of Western Ontario and McMaster Scale). The data were analysed with Spearman correlation coefficents and t-test by using of SPSS/WIN 12.0 version. Results: There was a negative correlation between knee pain, stiffness and difficulty in usual activity of sub category items of KWOMAC and EQ-5Dindex, while there was no correlation between these categories and EQ-VAS. Moreover, as a result of comparing the score of physical function measured by KWOMAC according to the severity degree of the EQ-5Dindex, the group of advanced stage having moderate and severe symptoms reported significantly higher scores of physical function than those of groups having no health problems. Conclusion: The EQ-5D is an acceptable and valid instrument for measuring health-related quality of life in patients with osteoarthritis.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.150-167
• /
• 2001

This cross sectional study was done to find out the situation of computer online pornography access by 4th to 6th grade elementary school students. The subjects of this study were three elementary schools in Andong, which were selected randomly and 120 students randomly selected from 4th to 6th grade for a total of 360 students. The questionnaire was composed with the help of a community health nursing professor and through the reference review. The collected data were analysed by a PC SPSS 10.0 according to school grade and sex, an 12-test was implemented to learn what percent of students have computers and software which prohibit the viewing of online pornography, access motivation and time, content viewed, attitude after accessing the contents, and opinions about computer online pornography. The results of this study were as follows. 1. A total of 86.1% of students had computers at home. Most students placed computers in their own room, 78.9% of students had computer online communication experience. Higher grade students tended to have more experience of communications on the internet (P<0.001). Most students chatted on the internet once or twice a week and higher grade students tended to communicate online more frequently. (P<0.001). Most students used computers more than one hour a day (P<0.05). They used computers according to the following priorities: game, studying, listening to music, communications, chatting. 2. Regarding the frequency of going computer online more than seven times per week, male students showed a higher frequency than female students (P<0.05). Male students used computers more than one hour a day and female students less than half an hour (P<0.001). Male students mostly used computers to play computer games. On the other hand. female students used the computer to study, listen to music, and chat (P<0.001). 3. Regarding software installation to prevent access of computer online pornography, a total of 19.4% of students responded they installed one. but 80.6% didn't have any, 20.3% of students had accessed pornography, 46.6% of students responded. they first get to know to the computer online pornography through friends. 4. The reasons for accessing computer online pornography were ranked as follows: curiosity, interest, to release stress, and sex drive (P<0.05). Obscene contents were found in computer games, pictures, and video. Among these, pictures were the most common. 5. Regarding students' attitude toward online pornography, most students responded that they took much pleasure in the contents (P<0.05). 6. Regarding the question 'Does online pornography degrade morals and cause a sex crime', most students responded as 'no'. They also responded positively to the suggestion that the contents would be effective in preventing sex crimes and to release stress. 74.7% of students responded that males' access of the contents as proper but females' access as immoral. Regarding social efforts to protect students from this harmful environment. most replied that those efforts were unnecessary (P<0.001).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.198-201
• /
• 2015

The prompt and accurate location determination of the nodes of the wireless indoor shipboard networks is crucial to forming the stable wireless shipboard sensor networks. To this end in this paper it can be achieved through the measurement of the bi-directional channel qualities among the nodes after the locations of the sensor nodes temporarily placed. For the 1st stage the piconet-type sensor networks are considered to measure the channel qualities between a specific node and the cluster node which is the master node. After finishing the 1st stage measurement the nodes needing the relay nodes are selected and the measurement action goes into the 2nd stage. In the 2nd stage the measurement between a candidate relay node and the node needing a relay node starts to begin. After the 2nd stage the relay nodes to connect to the cluster node are fixed and the information delivery paths between a node and the cluster head are established. In this paper the measurement results in the realistic environment are gathered and analysed to show that the measurement procedure can be applied in the wireless indoor shipboard networks.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.98-104
• /
• 2007

The expansion behavior of polystyrene (PS) chains with various molecular weights has been investigated above Flory $\Theta$temperature by viscometry after dissolving in the three different mixed solvents systems such as benzene/n-heptane, 1,4-dioxane/isopropanol, and 1,4-dioxane/n-heptane. Two different regimes are observed as increasing temperature: one regime is for the expansion of chain and the other is for the contraction. For the higher molecular weight sample of PS, the higher peak temperature showing its maximum expansion is obtained. Within a certain system of Ps/mixed solvents, the $\tau/\tau_c$ parameter shows universality for the variation of molecular weight. But while each system of Ps/mixed solvents has shown its own different slope, the universality breaks down in the overall system of mixed solvents. However after introducing a new empirical $b^{2/3}\tau/\tau_c$ parameter, all data points of three different systems have dropt on one master curve and the universality of chain expansion has recovered again. Here $\tau$ and $\tau_c$ are defined as $(T-\Theta)/\Theta$ and $(\Theta-T_c)/T_c$, respectively and $T_c$ is the critical solution temperature, and b of Schultz-Flory equation is corresponding to the effective slope in the plot of $1/T_c$ against $1/M_w^{1/2}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.94-101
• /
• 2016

With increasing global concerns for environmental impacts, efforts have been made to encourage a modal shift from road freight to an eco-friendly transport system such as rail freight. In Korea, the government has set master plans for a green transport system but has not taken any substantial action to promote rail freight transport. In developing policies and actions to promote rail freight, quantitative studies on environmental impacts among transportation means are essential. This study examined the air pollutant emissions and greenhouse gas (GHG) emissions per unit freight transported by road and rail, respectively. To improve the accuracy, we analyzed emission data and freight transport mileage of rail freight considering diesel locomotives and electric locomotives separately. The results show that unit air pollutant emissions (except SO2) from road freight are about 7~15 times more than those from rail freight. In addition, the GHG emission unit of road freight is about 4 times higher than that of rail freight.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.217-224
• /
• 2018

Purpose: The aim of this study was to evaluate accuracy of three type complete mandibular denture of before and after polymerization. Methods: Mandibular edentulous model was selected as the master model. 15 study models were made by Type IV stone. Wax complete mandibular dentures were produced by the denture base and artificial teeth. Before and after curing, STL files were obtained using a blue scanner. By superimposing the digitized complete mandibular denture data(after curing) with the CAD-reference(before curing) three-dimensionally, visual fit-discrepancies were drawn by calculating the root mean square (RMS) and visualized on a color-difference map. Each calculated RMS-value was statistically analyzed by 1-way analysis of variance(ANOVA) (${\alpha}=.05$). Results: Mean(SD) RMS-values was OM group $88.98(6.10){\mu}m$, BM group $82.35(13.46){\mu}m$, BDM group $77.83(9.46){\mu}m$. The results of the 1-way ANOVA showed no statistically significant differences in the RMS values of the Three groups for the material (P > .241). Conclusion : Deformation of artificial teeth position was observed in all groups after resin polymerization. But the values, all group were within the clinically acceptable range. The values of BDM group showed the least deformation than the other two groups.