• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1337-1345
• /
• 2000

마이크로스트립 안테나는 경량, 평면 구조와 대량 생산 등의 장점에 의해 최근 각광을 받고 있다. 특히 식각 기술에 의한 제조 등의 장점으로 인해 배열 안테나로서 강점을 나타내며 집중적인 연구의 대상이 되고 있다. 반면 몇 가지 단점에 의해 설계 및 제작 상에 어려움을 겪게 되는데 표면 전파(surface wave)에 의한 음영각(scanblindness) 발생 및 이에 의한 조향각(scan angle)의 제한 등을 들 수 있다. 이 논문에서는 이러한 문제점을 해결 할 수 있는 cavity-backed 마이크로스트립 방사소자를 사용하여 위상 배열 안테나 구조에서 강점을 나타내게 되는 삼각형 구조 배열 안테나를 해석하는 알고리즘을 설명하고 이를 통해 이러한 구조가 실제 성능의 개선을 가져 올 수 있음을 보이고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.109-118
• /
• 2023

In this paper, the evaluation method of fluidelastic instability (FEI) of newly designed steam generator tubing in pressurized water reactor (PWR) nuclear power plants is discussed. To obtain the parameters for prediction of the critical velocity of FEI for steam generator tubes, experimental research is carried out, and the design parameters are determined. Using CFD numerical simulation, the tube array scale of the model experiment is determined, and the experimental device is designed. In this paper, 7 groups of experiments with void fractions of 0% (water), 10%, 20%, 50%, 75%, 85% and 95% were carried out. The critical damping ration, fundamental frequency and critical velocity of FEI of tubes in flowing water were measured. Through calculation, the total mass and instability constant of the immersed tube are obtained. The critical damping ration measured in the experiment mainly included two-phase damping and viscous damping, which changed with the change in void fraction from 1.56% to 4.34%. This value can be used in the steam generator design described in this paper and is conservative. By introducing the multiplier of frequency and square root of total mass per unit length, it is found that the difference between the experimental results and the calculated results is less than 1%, which proves the rationality and feasibility of the calculation method of frequency and total mass per unit length in engineering design. Through calculation, the instability constant is greater than 4 when the void fraction is less than 75%, less than 4 when the void fraction exceeds 75% and only 3.04 when the void fraction is 95%.

• 센서학회지
• /
• 제22권3호
• /
• pp.219-222
• /
• 2013

The exhaled breath contains gases generated from human body. When disease occurs in the body, exhaled breath may include gas components released from disease metabolism. If we can find specific elements through analysis of the exhaled gases, this approach is an effective way to diagnose the disease. The lung function has a close relationship with exhalation. Exhaled gases from COPD (Chronic Obstructive Pulmonary Disease) patients can be analyzed by gas chromatography-mass spectroscopy (GC-MS) and a gas sensor system. The exhaled breath for healthy person and COPD patients had different components. Significantly more benzendicarboxylic acid was detected from COPD patients than in healthy persons. In addition, patients had a variety of decane. Phosphorous compounds with different isomers were detected from patients. The results obtained by gas sensor system were processed by PCA (Principal Component Analysis). The PCA results revealed distinct difference between the patients and healthy people.

• 천문학회보
• /
• 제41권2호
• /
• pp.62.2-62.2
• /
• 2016

We present a newly developed algorithm based on a Bayesian method for 2D tilted-ring analysis of disk galaxies which operates on velocity fields. Compared to the conventional ones based on a chi-squared minimisation procedure, this new Bayesian-based algorithm less suffers from local minima of the model parameters even with high multi-modality of their posterior distributions. Moreover, the Bayesian analysis implemented via Markov Chain Monte Carlo (MCMC) sampling only requires broad ranges of posterior distributions of the parameters, which makes the fitting procedure fully automated. This feature is essential for performing kinematic analysis of an unprecedented number of resolved galaxies from the upcoming Square Kilometre Array (SKA) pathfinders' galaxy surveys. A standalone code, the so-called '2D Bayesian Automated Tilted-ring fitter' (2DBAT) that implements the Bayesian fits of 2D tilted-ring models is developed for deriving rotation curves of galaxies that are at least marginally resolved (> 3 beams across the semi-major axis) and moderately inclined (20 < i < 70 degree). The main layout of 2DBAT and its performance test are discussed using sample galaxies from Australia Telescope Compact Array (ATCA) observations as well as artificial data cubes built based on representative rotation curves of intermediate-mass and massive spiral galaxies.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.56-63
• /
• 2015

최신 GPU는 프로세서 내부에 포함된 다수의 코어를 활용하여 높은 병렬처리가 가능하다. GPU의 높은 병렬성을 활용하는 기법 중 하나인 GPGPU 구조는 GPU에서 대부분의 CPU의 작업을 처리가 가능하게 해주며, GPU의 높은 병렬성과 하드웨어자원을 효과적으로 활용할 수 있다. 본 논문에서는 다양한 벤치마크 프로그램을 활용하여 CTA(Cooperative Thread Array) 할당 개수 변화에 따른 메모리 효율성과 성능을 분석하고자 한다. 실험결과, CTA 할당 개수 증가에 따라 다수의 벤치마크 프로그램에서 성능이 향상되었지만, 일부 벤치마크 프로그램에서는 CTA 할당 개수 증가에 따른 성능 향상이 발생하지 않았다. 이러한 이유로는 벤치마크 프로그램에서 생성된 CTA 개수가 적거나 동시에 수행할 수 있는 CTA 개수가 정해져 있기 때문으로 판단된다. 또한, 각 벤치마크 프로그램별로 메모리 채널 정체에 따른 메모리 스톨, 내부연결망 정체에 따른 메모리 스톨, 파이프라인의 메모리 단계에서 발생하는 스톨을 분석하여 성능과의 연관성을 파악하였다. 본 연구의 분석결과는 GPGPU 구조의 병렬성 및 메모리 효율성 향상을 위한 연구에 대한 정보로 활용될 것으로 기대된다.

• 한국공간정보시스템학회 논문지
• /
• 제10권1호
• /
• pp.1-14
• /
• 2008

최근 GIS 분야에서 공간 분석이나 군사적 목적을 위해 좀 더 상세하거나 넓은 영역의 공간 데이타를 요구함에 따라 대용량 공간 데이타의 효율적인 검색에 대한 필요성이 증대되고 있다. 이러한 분야에서 공간 데이타 검색에 활용되고 있는 Oracle Spatial이나 ESRI ArcSDE와 같은 기존의 GIS 소프트웨어는 공간 데이타의 안정적인 관리와 다양한 서비스를 위해 많은 기능들을 제공하지만, 저장 구조 및 공간 연산의 복잡성으로 인해 대용량 공간 데이타에 대한 검색이 비효율적이다. 따라서, 본 논문에서는 대용량 공간 데이타의 효율적인 검색을 위한 공간 미들웨어를 개발하였다. 본 논문에서 개발한 공간 미들웨어는 안정적인 공간 데이타의 관리를 위해 상용 DBMS인 Oracle을 데이타 저장소로써 활용하였으며, Oracle에 저장된 대용량 공간 데이타의 효율적인 접근을 위해 OCCI(Oracle C++ Call Interface)를 이용하였다. 또한, 대용량 공간 데이타의 효율적 연산과 검색을 위해 다양한 공간 연산 기법 및 Array Fetch 기법 등을 사용하였다. 마지막으로, 본 논문에서 개발한 공간 미들웨어와 Oracle Spatial 및 ESRI ArcSDE의 검색 성능을 비교함으로써 공간 미들웨어에 대용량 공간 데이타 검색 성능의 우수함을 입증하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권6호
• /
• pp.2485-2489
• /
• 2014

In the present study, we studied the hypermethylation of the human riboflavin transporter 2 (hRFT2) gene and regulation of protein expression in biopsies from resected tissues from Uighur cervical squamous cell carcinoma (CSCC) patients and their neighboring normal tissues. hRFT2 gene promoter region methylation sequences were mapped in cervical cancer cell line SiHa by bisulfite-sequencing PCR and quantitative detection of methylated DNA from 30 pairs of Uighur's CSCCs and adjacent normal tissues by MassARRAY (Sequenom, San Diego, CA, USA) and hRFT2 protein expression was analyzed by immunohistochemistry. In SiHa, we identified 2 CG sites methylated from all of 12CpG sites of the hRFT2 gene. Analysis of the data from quantitative analysis of single CpG site methylation by Sequenom MassARRAY platform showed that the methylation level between two CpG sites (CpG 2 and CpG 3) from CpG 1~12 showed significant differences between CSCC and neighboring normal tissues. However, the methylation level of whole target CpG fragments demonstrated no significant variation between CSCC ($0.476{\pm}0.020$) and neighboring normal tissues ($0.401{\pm}0.019$, p>0.05). There was a tendency for translocation the hRFT2 proteins from cytoplasm/membrane to nucleus in CSCC with increase in methylation of CpG 2 and CpG 3 in hRFT2gene promoter regions, which may relate to the genesis of CSCC. Our results suggested that epigenetic modifications are responsible for aberrant expression of the hRFT2 gene, and may help to understand mechanisms of cervical carcinogenesis.

• KSBB Journal
• /
• 제31권1호
• /
• pp.20-26
• /
• 2016

This study aims to examine the optimum blanching conditions as a pretreatment condition to improve the storage stability of Dolsan leaf mustard pickle. The effects of the blan- ching temperature and time were investigated at a temperature range of $80-100^{\circ}C$. Sampling was done for 1 month after a 5 days interval. The L value of the Dolsan leaf mustard was found to be the highest at $80^{\circ}C$. The cutting force increased as the blanching temperature increased. The tensile strength decreased at $95^{\circ}C$ and $100^{\circ}C$. In addition, the sensory evaluation scores were the best at $80^{\circ}C$. The storage stability was assessed at various blanching temperatures to increase the sinigrin content during storage. Liquid chromatography with photodiode array and tandem mass spectrometry (LC-PDA/MS/MS) analysis was conducted to identify and quantify the sinigrin content in the Dolsan leaf mustard. Sinigrin as an internal standard was co-injected into each sample solution. The sample was monitored by recording the ultraviolet absorbance at 228 nm and by electrospray ionization (ESI) positive ion mode in the m/z 50-1,500 range. Blanching the sample at $80^{\circ}C$ showed the highest sinigrin concentration during storage among various temperatures and the maximum concentration was 350 ppm at 15 days storage. Study on utilization of vegetable from food processing of leaf mustard and preservation conservation results suggest that blanching at $80^{\circ}C$ is expected to improve the palatability of the pickle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1849-1852
• /
• 2005

An automatic cap-washing machine is developed for rinse and dry of synthetic resin cap which is used in spring water bottle. This machine should be achieved all processes washing and drying, array, transfer automatically. A cap is washed by an ozonized water and pure water first. Next, a cap is dried by a hot wind drying equipment. In this paper, structural and modal analysis for the cap-washing machine is carried out to check the design criterion of the machine. The analysis is carried out by FEM simulation using the commercial software, CATIA V5. And a fictitious mass properties was used for the analysis of the machine. Finally, the machine performance is shown to be satisfactory.