• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1847-1853
• /
• 2000

A computer simulation technique for 2-dimensional laser generated ultrasonic waves was developed for visualization and investigation of ultrasonic propagation in solids. The technique is similar to a finite difference method (FDM) and a mass-particle model method, but uses a new nodal calculation method based on fundamental consideration of an elastic wave equation. By this method, the propagation behavior oflaser generated ultrasonic wave in thermoelastic and ablation mode is visualized and shows good agreement with previous experimental result or the numerical analysis result by Green function.

• Journal of Plant Biotechnology
• /
• v.6 no.3
• /
• pp.165-169
• /
• 2004

The fruits of Vitex rotundifolia in Korea, known as 'Man Hyung Ja', occupy an important position as traditional oriental medicine in Asian countries. It is known that propagation of this plant by seed is difficult and time-consuming with little success. Attempts were made to develop a method by using nodal culture techniques. Explants of stem node without leaves cultured on Nitsch medium containing 1 ml/L BA, gave the best shoot induction ratio. Also, BA with IAA or TDZ treatment showed positive effect on shoot induction. Half-strength Nitsch medium was supplemented with 0.5 mg/L NAA produced better success than did the others on root formation. It showed that many of the regenerants grew successfully on growth chamber at $24^{\circ}c$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.250-261
• /
• 1995

In this study, a rapid compression and expansion machine(RCEM) equipped with a swirl generator was designed and developed, in order to clarify normal and abnormal combustion(knocking phenomena). This RCEM is intended to simulate combustion process in actual automotive S.I.engines, having a high reproducibility in the compression stroke. Flame propagation and autoignition processes associated with normal and abnormal combustion were captured by the high speed schlieren photography. And swirl intensity. equivalence ratio and ignition position were varied to investigate the effect of turbulence, concentration in the unburnt gas region and flame propagation length. The knock intensity, knock mass fraction and knock mass fraction after autoignition were calculated by use of history of measured cylinder pressure.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.488-495
• /
• 2007

In this paper, SBN (Structure-Borne Noise) reduction of resiliently mounted machinery and effect of the foundation impedance on mount performance is studied. SBN reduction through the mount is analyzed by using two theoretical models; mass-spring model and wave model, in which longitudinal wave propagation is included. It is found that floor impedance greatly affects SBN reduction through lower mount, while it is almost negligible to SBN reduction through upper mount. Comparisons between measurement and predictions shows that the mass-spring model is valid only in low frequency range below few hundred Hz, while for high frequency ranges longitudinal wave propagation in the mount must be considered.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2008.11a
• /
• pp.70-70
• /
• 2008

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11b
• /
• pp.111-113
• /
• 2001

• Earthquakes and Structures
• /
• v.3 no.1
• /
• pp.17-35
• /
• 2012

Simplified equations for fundamental period of vibration of skeletal structures provided by most seismic design provisions suffer from the absence of any associated confidence levels and of any reference to their empirical basis. Therefore, such equations may typically give a sector of designers the false impression of yielding a fairly accurate value of the period of vibration. This paper, although not addressing simplified codes equations, introduces a set of mathematical equations utilizing the theory of error propagation and First-Order Second-Moment (FOSM) techniques to determine bounds on the relative error in theoretically calculated fundamental period of vibration of skeletal structures. In a complementary step, and for verification purposes, Monte Carlo simulation technique has been also applied. The latter, despite involving larger computational effort, is expected to provide more precise estimates than FOSM methods. Studies of parametric uncertainties applied to reinforced concrete frame bents - potentially idealized as SDOF systems - are conducted demonstrating the effect of randomness and uncertainty of various relevant properties, shaping both mass and stiffness, on the variance (i.e. relative error) in the estimated period of vibration. Correlation between mass and stiffness parameters - regarded as random variables - is also thoroughly discussed. According to achieved results, a relative error in the period of vibration in the order of 19% for new designs/constructions and of about 25% for existing structures for assessment purposes - and even climbing up to about 36% in some special applications and/or circumstances - is acknowledged when adopting estimates gathered from the literature for relative errors in the relevant random input variables.

• Korean Journal of Plant Resources
• /
• v.6 no.2
• /
• pp.171-179
• /
• 1993

This study was conducted to investigate the effect of growth regulators and medium composition on the growth of each stage in apical meristem culture for mass propagation of Zanthoxylum piperitum var. inerme Makino. The source material, shoot tip segments were taken from three-years old graft trees. Apical meristems were cultured in vitro on basal MS, GD, WS, half strength MS(1/2MS) and half strength GD(1/2GD) media supplemented with various concentrations for growth regulators(BA, IBA) and inorganic nutrients. The results summarized are as follows: 1. In culture establishment stage, ratio of culture establishment was 96.7% and the best resuit was obtained using MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 2. In shoot multitication stage, both shoot multiplication and growth were achieved in average 5.6cm. These results were obtained on in MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 3. In roothing stage, phloroglucinol(PG) acted as IBA synergist in root initiation. The most faverable combinations for root development was half-strength MS medium supplemented with 162mg/l PG and 0.2mg/l IBA, and ratio of rooting was 58.0%. 4. In Vitro formed plantlets were transplanted to paper pots in greenhouse with 85% of relative humidity. 96% of survival rate was obtained from artificial soil mix having same volume of sand, vermiculite, peat, and soil.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.184-189
• /
• 2001

Multiple shoots were induced from in vitro shoot originated from winter bud of P. yedoensis from Jeju. Most explants grow in similar type among the five different media but affected by supplement of sucrose regardless of media. For mass-propagation various concentrations of BAP or $GA_3$ were treated in the medium respectively. BAP was very effective to produce multiple shoots and 3.5~9.5 shoots were formed on the explant. The shoots induced on the high levels of BAP have short internodes. No shoots were induced on the treatment of $GA_3$ but roots were induced on it. When $GA_3$ was supplemented with the medium containing BAP, multiple shoots were produced from the explants. The medium(WPM) containing with $0.5mg/{\ell}$ BAP and $4.0mg/{\ell}$ $GA_3$ was most effective to produce multiple shoots. When the explants were cultured for 8 weeks, 39.5 shoots were developed in average.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.10a
• /
• pp.114-115
• /
• 2000

Aralia elata is found in mountain areas all over Korean peninsula. Aralia elata is the scientific name for Japanese angelica tree. The tree belongs to the family Araliaceae, commonly known as ginseng family. Bud sprouts from apical shoot tip of the plants are rich in flavor and thus mainly used for both folk medicine and vegetable. The stalks with apical buds are gathered in the early spring and planted in sandy soil or water in the greenhouse. The sprouting buds are then collected and sold as fresh vegetable. Although the plants have been used for food, they have been cultivated in a very small scale. In spring, local farmers just go around mountain areas to search the trees and gather the stalks as much as they get and sell them to the market. No conservation efforts have been made to stop the exploitation or to save the dwindling population. We tried to provide local farmers with the plants that may be used as an alternative to stalks from wild populations. This will bel! p conserve the wild populations. However, it is hard to propagate them either by conventional cuttings or by seed germination in a short period of time. Mass propagation using tissue culture systems have shown a great promise with several woody plants. Recently we developed a mass propagation technique via somatic embryogenesis system using mature and/or juvenile explants for Aralia elata. Several factors affecting somatic embryogenesis system including SE(somatic embryo) induction, embryogenic callus proliferation, SE germination, plant regeneration and transplanting to field frill be presented. And some problems arising for the somatic embryogenesis system will be also discussed.