• Journal of Magnetics
• /
• 제21권2호
• /
• pp.244-248
• /
• 2016

Aiming to improve the shear yield stress of magnetorheological fluid, magnetorheological fluids with different particle characteristics are prepared, and the influence rules of particle mass fraction, particle size, nanoparticles content and application temperature on shear yield stress are investigated. Experimental results indicate that shear yield stress increases approximate linearly with the enhancement of particle mass fraction. Particle size and the nanoparticles within 10% mass fraction can improve the shear yield stress effectively. When the application temperature is higher than $100^{\circ}C$, the shear yield stress decreases rapidly because of thermal expansion and thermal magnetization effect.

• 농업과학연구
• /
• 제51권1호
• /
• pp.63-77
• /
• 2024

Yield monitoring systems have become integral to precision agriculture, providing insights into the spatial variability of crop yield and playing an important role in modern harvesting technology. This paper aims to review current research trends in yield monitoring systems, specifically designed for non-grain crops, including cabbages, radishes, potatoes, and tomatoes. A systematic literature survey was conducted to evaluate the performance of various monitoring methods for non-grain crop yields. This study also assesses both mass- and volume-based yield monitoring systems to provide precise evaluations of agricultural productivity. Integrating load cell technology enables precise mass flow rate measurements and cumulative weighing, offering an accurate representation of crop yields, and the incorporation of image-based analysis enhances the overall system accuracy by facilitating volumetric flow rate calculations and refined volume estimations. Mass flow methods, including weighing, force impact, and radiometric approaches, have demonstrated impressive results, with some measurement error levels below 5%. Volume flow methods, including paddle wheel and optical methodologies, yielded error levels below 3%. Signal processing and correction measures also play a crucial role in achieving accurate yield estimations. Moreover, the selection of sensing approach, sensor layout, and mounting significantly influence the performance of monitoring systems for specific crops.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권1호
• /
• pp.57-61
• /
• 1994

The study was conducted at low lying areas in Pabna Sirajgong districts of Bangladesh. To observe the potentiality of bio-mass production two trials were conducted. In first trial maize intercropped with Khesari taking 15 experimental plots of each size $5m{\times}5m$ were arranged in 5 blocks having homogenous soil characteristics. The study showed that the bio-mass yield of sole maize and sole Khesari were 35.25 t/ha. and 56.80 t/ha. respectively and there was a significant difference (p < 0.01) among them. The results also showed that bio-mass yield of maize and Kherasi was higher ($70.04{\pm}6.25t/ha$, $98.88{\pm}10.77t/ha$ and $80.56{\pm}9.5t/ha$) compared to sole maize and sole Khesari and land equivalent ratio was also lower. For second trial, one hectare of land was divided into 16 experimental plots with 4 replications in each plot. Four levels of urea (0 kg/ha, 30 kg/ha, 45 kg/ha, and 60 kg/ha.) were applied to experimental plot. The seed rates were 98.8 kg/ha (farmer's practice), 86.45 kg/ha, 74.1 kg/ha and 61.75 kg/ha. average bio-mass yield of matikalai at different seed rates along with urea fertilizer ranged from 38.49 t/ha, to 65.35 t/ha. the highest seed rate along with highest fertilizer also correspond to the peak production (65.35 t/ha) and the lowest seed rate (61.75 kg/ha) along with the lowest fertilizer rate (30 kg/ha.) showed lowest production (38.49 t/ha.). Here, it was found that the bio-mass yield of matikalai increased with the incremental amount of seed, indicating significant effect (p < 0.05) of seed rates on the bio-mass yield of matikalai. On the other hand, fertilizer doses in different treatment combinations had significant effect (p < 0.05) on bio-mass yield. Two levels of seed rates at zero level of fertilizer were recommended : 86.45 kg/ha for the resource rich farmers and 61.75 kg/ha for the resource poor farmers.

• 한국화재소방학회논문지
• /
• 제21권2호
• /
• pp.30-35
• /
• 2007

고분자 물질의 화재 위험성 및 화재시 인명 피해의 감소를 위한 기초자료로 제시하고자 난연제 및 금속분말의 첨가에 의한 난연성 평가를 수행하였다. 본 연구를 위하여 중량감소율,한계산소지수 및 탄화층 생성량 측정, 연기 중량 농도 및 일산화탄소 발생량 측정의 실험을 수행하였다. 금속분말과 난연제를 함유한 acrylonitrile butadiene styrene은 낮은 중량감소율을 나타내었고, 한계산소지수 및 탄화충 생성량은 증가하였으며, 연기 중량 농도 및 일산화탄소의 발생량도 감소하는 결과를 나타내었다. 또한 가장 효과적인 복합체는 tricresyl phosphate-Mo 복합체로 나타났다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.686-693
• /
• 2000

Biomass yield, nutritive value and nutrient utilization efficiency of different genera of duckweed (DW, Lemnaceae) under the same nutritional and management conditions were studied. Three genera of DW namely: Lemna perpusilla, Spirodela polyrhiza and Woljfia arrhiza, were cultivated in 18 plastic sinks each of $59{\times}54{\times}35cm^3$ size. Each sink contained approximately 80 L of water and was charged once with 6.648 kg of anaerobically fermented cow dung effluent. The seed rate for Spirodela, Lemna and Wolffia were 600, 400 and $600g/m^2$ respectively. Duckweed were harvested at 48 hours intervals. Media total N concentration for Lemna and Wolffia gradually increased with time. Growth of duckweed was measured by subtracting the inoculum from the total biomass production. Growth of Spirodela ceased within 4 days but Lemna and Wolffia continue to grow up to 34 days. Bio-mass yield was significantly (p<0.05) higher in Wolffia (906 kg/ha/d) than Lemna (631 kg/ha/d). Dry matter (DM) yield was very similar in Lemna (14.80 kg/ha/d) and Wolffia (14.57 kg/ha/d). The N content was non-significant higher in Lemna (5.45%) than Wolffia (5.00%) and Spirodela (4.6%). The crude protein (CP, $N{\times}6.25$) yield was non-significantly higher in Lemna (4.83 kg/ha/d) than Wolffia (4.32 kg/ha/d). The acid detergent fibre (ADF) content was the highest in Wolffia (28.59%), followed by Spirodela (19.47%) and Lemna (12.39%). Utilization efficiency of CP was 273 and 314% respectively for Wolffia and Lemna. However, similar efficiency values for Spirodela was only 1.5%. Considering the bio-mass yield, nutritive value and nutrient utilization efficiency, production performance of DW were in the order of Lemna>Wolffia>Spirodela under the present experimental conditions.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.103-109
• /
• 2018

Purpose: This study has been conducted to develop a potato yield monitoring system, consisting of a segmentation algorithm to detect potatoes scattered on a soil surface and a counting system to count the number of potatoes and convert the data from two-dimensional images to masses. Methods: First, a segmentation algorithm was developed using top-hat filtering and processing a series of images, and its performance was evaluated in a stationary condition. Second, a counting system was developed to count the number of potatoes in a moving condition and calculate the mass of each using a mass estimation equation, where the volume of a potato was obtained from its two-dimensional image, and the potato density and a correction factor were obtained experimentally. Experiments were conducted to segment potatoes on a soil surface for different potato sizes. The counting system was tested 10 times for 20 randomly selected potatoes in a simulated field condition. Furthermore, the estimated total mass of the potatoes was compared with their actual mass. Results: For a $640{\times}480$ image size, it took 0.04 s for the segmentation algorithm to process one frame. The root mean squared deviation (RMSD) and average percentage error for the measured mass of potatoes using this counting system were 12.65 g and 7.13%, respectively, when the camera was stationary. The system performance while moving was the best in L1 (0.313 m/s), where the RMSD and percentage error were 6.92 g and 7.79%, respectively. For 20 newly prepared potatoes and 10 replication measurements, the counting system exhibited a percentage error in the mass estimation ranging from 10.17-13.24%. Conclusions: At a travel speed of 0.313 m/s, the average percentage error and standard deviation of the mass measurement using the counting system were 12.03% and 1.04%, respectively.

• 물과 미래
• /
• 제18권3호
• /
• pp.253-264
• /
• 1985

근본적으로 저수지의 Storage-Yield 관계를 해석하는 데는 두가지 관점이 있다. 가장 보편적인 관점은 필요한 수요량을 공급하기 위하여 저수지의 필요저수용량을 결정하는 것이다. 이런 형태의 문제는 저수지의 계획이나 초기 설계단계에서 보통 생긴다. 두 번째 관점은 주어진 저수용량에 대한 방류량의 결정이며, 이것은 최종 설계나 더 상세한 분석을 위한 현존 저수지의 재평가에서 자주 생긴다. 본 연구의 목적은 저수지의 설계나 운영을 위한 Storage-Yield 관계를 산정하는 현재의 방법론을 개선하는 것이다. 저수지의 Storage-Yield 관계를 해석하느 s가장 적합한 기법을 찾기 위하여 잔차누가곡선기법(Residual mass curve technique), 개선된 저류량기법(Low flow technique)과 TPM 기법(Transition probability matrix technique)이 검토되었다. 저수지의 Storage-Yield 관계를 해석하는데 있어서 홍천댐 건설예정지점의 1917∼1940년 월유입량 자료와 Thomas-Fiering 모델에 의해 모의 발생된 자료를 가지고 위의 세가지 기법을 상세히 검토하였다. 저수지의 Storage-Yield 관계를 폭넓게 검토한 결과, 잔차누가곡선기법과 저류량기법은 예비 설계에 타당하며, TPM 기법은 월별 혹은 계절별 수요변동을 고려할 수 있기 때문에 최종 설계에 타당한 기법임을 알 수 있다.

• Journal of Microbiology and Biotechnology
• /
• 제11권4호
• /
• pp.644-648
• /
• 2001

The biological control potential of entomopathogenic nematodes (EPN) can be enhanced by improved culture efficiency. Optimization of the media is a key factor for improving in vitro mass production of entomopathogenic nematodes. This study reports the effect of medium concentration. The medium is a combination of carbohydrates, lipids, proteins, sats, and growth factors, on the growth of Heterorhabditis bacteriophora and its symbiotic bacterium Photorhabdus liminescens. The overall optimal medium concentration for nematode recovery, hermaphrodite size, bacterial mass, infective juveniles (IJs) yield, and doubling time was 84 g/l. At this concentration rate, the doubling time of IJs production and the biomass of symbiotic bacteria was 1.6 days and 12.8 g/l, respectively. The maximum yield of $2.4{\times}{10^5}IJs/ml$ was attained within a one-generation cycle (eight days). The yield coefficient was $2.8{\times}{10^6}$ IJs/g medium, and the maximum productivity was $3.1{\times}{10^7}$ IJs per day. Medium concentration affected two independent factors, recovery and hermaphrodite size, which in turn influenced the final yield.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.585-600
• /
• 2017

This study deals with simple solutions for a spherical or circular opening excavated in elastic-brittle plastic rock mass compatible with a linear Mohr-Coulomb (M-C) or a nonlinear Hoek-Brown (H-B) yield criterion. Based on total strain approach, the closed-form solutions of stresses and displacement are derived simultaneously for circular and spherical openings using original H-B and M-C yield criteria. Two simple numerical procedures are proposed for the solution of generalized H-B and M-C yield criteria. Based on incremental approach, the similarity solution is derived for circular and spherical openings using generalized H-B and M-C yield criteria. The classical Runge-Kutta method is used to integrate the first-order ordinary differential equations. Using three data sets for M-C and H-B models, the results of the radial displacements, the spreading of the plastic radius with decreasing pressure, and the radial and circumferential stresses in the plastic region are compared. Excellent agreement among the solutions is obtained for all cases of spherical and circular openings. The importance of the use of proper initial values in the similarity solution is discussed.