• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.579-587
• /
• 2017

Spaceborne cryocoolers produce undesirable micro-vibration disturbances during their on-orbit operation, which are a primary source of image-quality degradation for high-resolution observation satellites. Therefore, to comply with the strict mission requirement of high-quality image acquisition, micro-vibration disturbances induced by cooler operation have always been subjected to an isolation objective. However, in this study, we focused on the applicability of energy harvesting technology to generate electrical energy from micro-vibration energy of the cooler and investigated the feasibility of utilizing harvested energy as a power source to operate low-power-consumption devices such as micro-electromechanical system (MEMS) devices. A tuned mass damper (TMD)-type electromagnetic energy harvester combined with a conventional passive vibration isolator was proposed to achieve this objective. The system performs the dual functions of electrical energy generation and micro-vibration isolation. The effectiveness of the strategy was evaluated through numerical simulations.

• Journal of Astronomy and Space Sciences
• /
• 제4권1호
• /
• pp.35-45
• /
• 1987

The peculiar elliptical (EOp) galaxy NGC 4486 and two KOII comparison stars HR5450, HR6935 were observed spectroscopically using the 74-inch telescope and Image Tube at Mt. Stomlo Observatory. From the Gaussian Broadening Function, broadened spectrum of two comparison stars were computed for the range between wavelength 4800$\AA$ and 5400$\AA$. Velocity dispersions in the line of sight of M87 were obtained by visual fitting. The fitted velocity dispersion is 450 km/sec at the nucleus, 350km/sec at r=12", and 300km/sec at r=24". Using the photometric data and the central value of velocity dispersion, we determined the mass of M87. From <$r^{2/4}$ law and the Virial theorem the calculated total mass in $2.1\times10^{12}M_\odot$ and from the King Model $M=1.2\times10^{12}M_\odot$. And M/L ratio of M87 is about 30.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.50-56
• /
• 2016

This paper is about the implementation of the OFDM-based border guard/reconnaissance communication terminal systems. We have implemented Real-time Dynamic DL/UL symbol rate control function using the DL-MAP message, and proposed error detection method caused by malfunctioning and timing optimization method. The proposed scheme detects the variable rate symbol decoding timing without increasing additional physical layer logic, and also provides a wide variety of DL/UL data transfer rate. Furthermore, the proposed scheme applies to the current border guard/reconnaissance equipment and confirms a operation performance through field tests and demonstration at home and abroad.

• 소음진동
• /
• 제2권4호
• /
• pp.273-280
• /
• 1992

The prediction of vibration response of floor is necessary in order to check whether the floor vibration level will satisfy the allowable vibration standard of precise machinery such as electronic microscopes in semiconductor manufacturing plant before the installation of various neighboring equipment facility. In conventional vibration isolation, we were mainly interested in minimization of vibration transmissibility and stabilization of vibration isolation system. But in order to predict vibration response of floor, it is necessary to know exciting force of equipment installed on the floor and the mobility of the floor. We measured the exciting force of the dropped mass assumed as equipment and the mobility of some practical building floor using large impact hammer. And from this we predicted the vibration response of floor on which the mass dropped. This predicted vibration response of floor is compared with measured vibration response. Through upper procedure, we examined the possibility of predicting vibration response of floor from the information of exciting force of equipment and the mobility of floor.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.561-562
• /
• 2003

pH varies in the oral environment and on tooth surfaces. The surface of a plaque covered resinous restoration has a low pH. In human dental plaque a number of acids are produced by bacterial metabolism. The predominant acids are acetic, propionic and lactic acids. These acids induced a surface swelling of restorative resin. The swelling cause formation of pores inside the resin matrix from which organic substances can be released, resulting in a mass loss. The purpose of this study was to qualitatively and quantitatively analyse the leached monomers of dental composites after storage in acetate buffer solution as a function of time by means of high performance liquid chromatography(HPLC) / mass spectrometer and further determine whether pH and time has any influence on the degradation behavior of composite restoration.(omitted)

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.83-90
• /
• 1999

This paper presents a method of seismic analysis for a cylindrical liquid storage structure on horizontally layered half-space considering the effects of the interior fluid and exterior soil medium in the frequency domain. the horizontal and rocking motions of the structures are included in this study. The fluid motion is expressed in terms of analytical velocity potential function which can be obtained by solving the boundary value problem including the sloshing behavior of the fluid as well as deformed configuration of the structure. The effect of the fluid is included in the equation of motion as the impulsive added mass and a frequency-dependent convective added mass along the nodes on the wetted boundary with structure. The soil medium is presented using the 3-D axisymmetric finite elements and dynamic infinite elements. The present method can be applied to the structures embedded in ground as well as on ground since it models the soil medium directly as well as the structure. For the purpose of vertification dynamci characteristics of a tank on homogeneous half-space is analyzed. Comparison of the present results with those by others shows good agreement.

• Bulletin of the Korean Chemical Society
• /
• 제18권7호
• /
• pp.720-729
• /
• 1997

The interface between two different polymers is characterized theoretically by using a model. This model is based on the assumption that the monomeric friction coefficients of the two polymers are identical but a strong function of the matrix composition. This model predicts that the concentration profiles are highly asymmetric with substantial swelling of the slower-diffusing component by the faster component. To predict the behavior of interdiffusion, three quantities are used: distance of interface Z*(t) due to the swelling, interfacial width W(t) which is most sensitive to the detailed composition profiling, and mass transport M(t) due to interdiffusion. It is found that the more dissimilar polymer pairs, the faster the movement of the interface, the quicker its interfacial width saturates to a limiting value and the slower its mass transport. These results are in qualitative agreement with some experiments.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.391-406
• /
• 2019

The aim of this paper was to study the influence of the footing shape and the effect of the roughness of the foundation base on the bearing capacity of shallow foundations on rock masses. For this purpose the finite difference method was used to analyze the bearing capacity of various types and states of rock masses under the assumption of Hoek-Brown failure criterion, for both plane strain and axisymmetric model, and considering smooth and rough interface. The results were analyzed based on a sensitivity study of four varying parameters: foundation width, rock material constant (mo), uniaxial compressive strength and geological strength index. Knowing how each parameter influences the bearing capacity depending on the footing shape (circular vs strip footing) and the footing base interface roughness (smooth vs rough), two correlation factors were developed to estimate the percentage increase of the ultimate bearing capacity as a function of the footing shape and the roughness of the footing base interface.

• 국제초고층학회논문집
• /
• 제10권2호
• /
• pp.109-116
• /
• 2021

This paper explores the meaning and importance of tuning amongst other Tuned Mass Damper (TMD) parameters and describes processes to help ensure that an as-built TMD is properly tuned to the as-built high-rise building. A summary of key TMD components and TMD implementations will be presented as an introduction and review. Next, it will be shown that tuning is a means for optimizing TMD performance. A process using modal characterization tests during tower construction to estimate natural frequencies of the completed tower will be described. Finally, the use of a Frequency Response Function (FRF) as a means for verifying the frequency of a TMD will be proposed.

• 천문학회보
• /
• 제46권2호
• /
• pp.43.1-43.1
• /
• 2021

Using 74 galaxy clusters in the COSMOS field at 0.1 < z < 1.2, we calculate the environmental quenching timescale, defined as the time required after a galaxy is accreted by a cluster for it to stop star formation. Cluster candidates are selected as the overdensities with the surface number density exceeding the 4-σ. With the "delayed-then-rapid" quenching model, we can successfully reproduce the separation of the galaxies(star-forming, intermediate, and quiescent) on the NUV-R - R-J color plane comparing with the BC03 evolutionary track. With the mass growth rate of halo mass and the ratio of categorized galaxies, we can constratin the environmental quenching timescale ~ 2Gyr at z ~ 1. We will present the result as a function of redshift and compare them with dynamical timescale and gas depletion timescale.