• Journal of Microbiology and Biotechnology
• /
• v.19 no.4
• /
• pp.391-396
• /
• 2009

The chemical compositions, and antibacterial and antifungal effects of essential oils extracted from three coniferous species, Pinus densiflora, Cryptomeria japonica, and Chamaecyparis obtusa, were investigated. Gas chromatography mass analysis of the essential oils revealed that the major components and the percentage of each essential oil were 16.66% $\beta$-phellandrene and 14.85% $\alpha$-pinene in P. densiflora; 31.45% kaur-16-ene and 11.06% sabinene in C. japonica; and 18.75% bicyclo [2,2,1] heptan-2-ol and 17.41% 2-carene in Ch. obtusa. The antimicrobial assay by agar disc diffusion method showed that $2.2{\mu}g$ of Ch. obtusa oil inhibited most effectively the growth of Escherichia coli ATCC 33312 and Klebsiella oxytoca ATCC 10031, whereas the C. japonica oil gave weak antimicrobial activity. The minimal inhibitory concentration(MIC) values for bacterial strains were in the range of 5.45-21.8 mg/ml depending on essential oils, but most Gram-negative bacteria were resistant even at 21.8 mg oil/ml. P. densiflora oil showed the most effective antifungal activity and the MIC values for Cryptococcus neoformans B42419 and Candida glabrata YFCC 062CCM 11658 were as low as 0.545 and 2.18 mg/ml, respectively. Cryp. neoformans B42419 was the most sensitive to all essential oils in the range of 0.545-2.18 mg/ml. Our data clearly showed that the essential oils from the three conifers had effective antimicrobial activity, especially against fungi.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.399-405
• /
• 2013

The gas motion inside the engine cylinder plays a very important role in determining the thermal efficiency of an internal combustion engine. A precise information of in-cylinder three dimensional complex gas motion is crucial in optimizing engine design. Homogeneous charge compression ignition (HCCI) engine is a combustion concept, which is a hybrid between Otto and Diesel engine. The turbulent diffusion leads to increased rates of momentum, heat and mass transfer. The in-cylinder turbulence flow was found to affect the present HCCI combustion mainly through its influence on the wall heat transfer. This study investigates the effect of piston geometry shape on the turbulent flow characteristics of in-cylinder from the numerical analysis using the LES model and the results obtained can offer guidelines of the combustion geometries for better combustion process and engine performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.181-181
• /
• 2012

Direct synthesis of graphene using a chemical vapor deposition (CVD) has been considered a facile way to produce large-area and uniform graphene film, which is an accessible method from an application standpoint. Hence, their fundamental understanding is highly required. Unfortunately, the CVD growth mechanism of graphene on Cu remains elusive and controversial. Here, we present the evidences for two different growth modes of graphene on Cu investigated by varying carbon feedstock (C2H2 and CH4) and working pressure. The number of uniform graphene layer grown by C2H2 increased with increasing its injection time. A combined secondary ion mass spectrometry (SIMS) and X-ray diffraction (XRD) study revealed a carbon-diffused Cu layer created below surface region of Cu substrate with the expansion of Cu lattice. The graphene on Cu was grown by the diffusion and precipitation mode not by the surface adsorption mode, because similar results were observed in graphene/Ni system. The carbon-diffused Cu layer was also observed after graphene growth under high CH4 pressure. Based on various previous results and ours, we have successfully found that there are two selective growth modes for graphene on Cu substrate, and a desired mode can be chosen by tuning working pressure corresponding to the kind of carbon feedstock. We believe that this finding will shed light on high quality graphene growth and its multifaceted applications.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.431-437
• /
• 2012

In today's modern society, since the Industrial Revolution took place, still lots of goods have been produced in quantity. However, human's instinct has been growing bigger and bigger that he or she wants to possess the works or products of scarcity and aesthetic value of a sculpture handmade by craftsmen, not mass-produced with the same design patterns. Accordingly, it is required that an artist be concerned about the value of figuring out and pursuing an individual's lifestyle, his/her needs and inherent desires. Moreover, by means of visualization technique, an artist should provide the public with several scenarios about the future, letting them choose the one they want democratically. Therefore, with the help of Mokumegane technique, one of the traditional metal crafts techniques, which shows certain organic patterns joining different metals, this research aims for the inheritance of traditional techniques and the objective preparation for high-quality crafts market, studying the patterns expressed on the surface of metals, which are hard to find through machines.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.296-305
• /
• 2017

Background: Surfactant-containing water sprays are commonly used in coal mines to collect dust. This study investigates the dust collection performance of different surfactant types for a range of coal dust particle sizes and charges. Methods: Bituminous coal dust aerosol was generated in a wind tunnel. The charge of the aerosol was either left unaltered, charge-neutralized with a neutralizer, or positively- or negatively-charged using a diffusion charger after the particles were neutralized. An anionic, cationic, or nonionic surfactant spray or a plain water spray was used to remove the particles from the air flow. Some particles were captured while passing through spray section, whereas remaining particles were charge-separated using an electrostatic classifier. Particle size and concentration of the charge-separated particles were measured using an aerodynamic particle sizer. Measurements were made with the spray on and off to calculate overall collection efficiencies (integrated across all charge levels) and efficiencies of particles with specific charge levels. Results: The diameter of the tested coal dust aerosol was $0.89{\mu}m{\pm}1.45$ [geometric $mean{\pm}geometric$ standard deviations (SD)]. Respirable particle mass was collected with $75.5{\pm}5.9%$ ($mean{\pm}SD$) efficiency overall. Collection efficiency was correlated with particle size. Surfactant type significantly impacted collection efficiency: charged particle collection by nonionic surfactant sprays was greater than or equal to collection by other sprays, especially for weakly-charged aerosols. Particle charge strength was significantly correlated with collection efficiency. Conclusion: Surfactant type affects charged particle spray collection efficiency. Nonionic surfactant sprays performed well in coal dust capture in many of the tested conditions.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.560-564
• /
• 2011

The objective of this study is to propose a mathematical model for a pervaporation process for concentrating hydrogen peroxide. The process was developed by NASA, which consists of a shell and membrane tubes, where a liquid hydrogen peroxide solution flows in the shell, and a sweep gas flows in the tubes countercurrent to each other. The liquid retentate is concentrated as more water molecules permeate and evaporate through the membrane than hydrogen peroxide. For this process, a mathematical model has been developed in the form of a system of nonlinear partial differential algebraic equations based on a sorption-diffusion mechanism for permeation, an Arrhenius relationship for the temperature dependency of the permeate flux, and mass and momentum balances for the liquid concentrations and flows in the membrane module. The dynamic behavior of the concentration of hydrogen peroxide in the retentate side has been simulated by solving a simplified version of the proposed model, and the result is compared with the experimental data reported in the NASA patent.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.2
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.1-1
• /
• 2009

In this presentation, I talk about various fluid simulation methods that have been developed for computer graphics special effects since 1996. They are all based on CFD but sacrifice physical reality for visual plausability and time. But as the speed of computer increases rapidly and the capability of GPU (graphics processing unit) improves, methods for more physical realism have been tried. In this talk, I will focus on four aspects of fluid simulation methods for computer graphics: (1) particle level-set methods, (2) particle-based simulation, (3) methods for exact satisfaction of incompressibility constraint, and (4) GPU-based simulation. (1) Particle level-set methods evolve the surface of fluid by means of the zero-level set and a band of massless marker particles on both sides of it. The evolution of the zero-level set captures the surface in an approximate manner and the evolution of marker particles captures the fine details of the surface, and the zero-level set is modified based on the particle positions in each step of evolution. (2) Recently the particle-based Lagrangian approach to fluid simulation gains some popularity, because it automatically respects mass conservation and the difficulty of tracking the surface geometry has been somewhat addressed. (3) Until recently fluid simulation algorithm was dominated by approximate fractional step methods. They split the Navier-Stoke equation into two, so that the first one solves the equation without considering the incompressibility constraint and the second finds the pressure which satisfies the constraint. In this approach, the first step introduces error inevitably, producing numerical diffusion in solution. But recently exact fractional step methods without error have been developed by fluid mechanics scholars), and another method was introduced which satisfies the incompressibility constraint by formulating fluid in terms of vorticity field rather than velocity field (by computer graphics scholars). (4) Finally, I want to mention GPU implementation of fluid simulation, which takes advantage of the fact that discrete fluid equations can be solved in parallel.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.4
• /
• pp.296-303
• /
• 2005

A strain named as HJ35 was isolated from the skin of sixty-five men and fourteen women for acne therapy, in order to find an effective antimicrobial agent against Propionibacterium acnes. Isolate HJ35 was identified as Enterococcus faecium based on 16 rDNA sequence and produced enterocin HJ35 having antimicrobial activities against most lactic acid bacteria, En­terococcus spp., Staphylococcus aureus, S. epidermidis, Clostridium perfringens, some bacilli, Mi­crococcus flavus, Listeria monocytogenes, L. ivanovii, Escherichia coli, Pseudomonas fluorescens and Propionibacterium acnes, in the modified well diffusion method. Especially, enterocin HJ35 showed a bactericidal activity against Propionibacterium acnes P1. The antimicrobial activity of enterocin HJ35 was disappeared completely with the use of protease XIV. But enterocin HJ35 activity is very stable at high temperature (up to $100^{\circ}C$ for 30 min), in wide range of pH (3.0${\~}$9.0), and by treatment with organic solvents. The apparent molecular mass of enterocin HJ35 was estimated to be approximately 4${\~}$4.5 kDa on detection of its bactericidal activity after SDS-PAGE. In batch fermentation of E. faecium HJ35, enterocin HJ35 was produced at the mid­log growth phase, and its maximum production was obtained up to 2,300 AU/mL at the late stationary phase. By employing fed-batch fermentation, the enhanced production of enterocin HJ35 was achieved up to 12,800 AU/mL by feeding with 10 g/L glucose or 6 g/L lactate.

• Journal of Life Science
• /
• v.20 no.12
• /
• pp.1792-1800
• /
• 2010

In this study, we isolated five macrolactin compounds from a fermentation broth of Bacillus polyfermenticus KJS-2. The macrolactin compounds were structurally identified as macrolactin A (MA), 7-O-malonyl macrolactin A (MMA), 7-O-succinyl macrolactin A (SMA), macrolactin E (ME) and macrolactin F (MF) via a variety of NMR techniques, COZY, DEPT, HMQC and HMBC, and mass and specific rotation assays. The three macrolactin compounds, MA, MMA and SMA, profoundly inhibited the growth of both vancomycin-resistant Enterococci (VREs) and methicillin-resistant Staphylococcus aureus (MRSA), the inhibition of which were estimated via a disc agar diffusion bioassay. MA, MMA, and SMA exhibited antibacterial activities superior to those of vancomycin and teicoplanin.