• 동력기계공학회지
• /
• 제20권4호
• /
• pp.38-43
• /
• 2016

Safety-related equipments of Nuclear Power Plants(NPP) have to perform environmental qualification test in accordance with IEEE-323 standards. However, non-metallic materials replace new one regularly instead of the test because they are considered as consumable parts. In this study, the seven kinds of non-metallic materials are selected and their activation energy was experimentally evaluated with uncertainty analysis by using thermogravimetric analyzer(TGA). In order to obtain activation energy of non-metallic materials, mass difference, temperature raising rate and conversion rate on the specimen are analyzed. It is postulated that the three experiment conditions are important to get a reliable activation energy. This postulate was experimentally confirmed using Arrhenius equation and Flynn-Wall-Ozawa analysis.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2728-2745
• /
• 2021

The purpose of this study is to reduce seismic responses of an actual nuclear piping system using a tuned mass damper (TMD) device. A numerical piping model was developed and validated based on shaking table test results with actual nuclear piping. A TMD for nuclear piping was newly devised in this work. A TMD shape design suitable for nuclear piping systems was conducted, and its operating performance was verified after manufacturing. The response reduction performance of the developed TMD under earthquake loading on actual piping was investigated. Results confirmed that, on average, seismic response reduction rates of 34% in the maximum acceleration response, 41% in the root mean square acceleration response, and 57% in the spectral acceleration response were shown through the TMD application. This developed TMD operated successfully within the seismic response reduction rate of existing TMD optimum design values. Therefore, the developed TMD and dynamic interpretation help improve the nuclear piping's seismic performance.

• 공업화학
• /
• 제9권3호
• /
• pp.394-398
• /
• 1998

실리콘의 모노머로 사용되고 있는 MCS의 합성 최적조건에 관한 연구를 수행하였다. 4원촉매계($CuCl/ZnCl_2/Sn/Cd$)와 원료규소로 부터 접촉물질을 제조한 후, 염화메틸과 반응시켜 MCS를 합성할 때 실험계획법에 따라 실험하고 해석하여 하나의 공정조건을 확립하였다. 접촉물질 50g, 교반속도 60rpm, 상압에서 최적반응온도와 MeCl 유량은 각각 $300-305^{\circ}C$와 $70-80cm^3/min$이었다. 또한 연속적으로 실험을 수행하여 최적공정조건을 확인하였으며, MeCl의 전환율 67%와 규소소모율 92%에서 평균반응속도는 170(g-MCS/hr.kg-Si), 평균선택도는 0.05이었으며, 연속식 실험결과로부터 총괄반응속도식의 파라미터와 최적압력을 구하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권10호
• /
• pp.1458-1463
• /
• 2016

A 42-d study with 384 Hy-line brown laying hens was conducted to assess the effects of dietary octacosanol supplementation on laying performance, egg quality and blood metabolites of laying hens. Hens were randomly allocated into 4 dietary groups of 8 cages each, which were fed basal diet supplemented with 0 (Control), 9 (OCT9), 18 (OCT18), and 27 (OCT27) mg/kg diet of octacosanol isolated from rice bran, respectively. The experiment was conducted in an environmental controlled house and hens were fed twice daily for ad libitum intake. Laying performance was determined over the 42-d period, and egg quality as well as blood metabolites were estimated on d 21 and d 42. Diets in OCT18 and OCT27 increased (p<0.05) laying rate, egg weight, egg mass, egg albumen height, Haugh unit and eggshell strength on d 42, but decreased (p<0.05) feed conversion rate and levels of total cholesterol, triglyceride and low density lipoprotein cholesterol in the serum as compared to those of Control. Feed intake, yolk color, yolk diameter, eggshell thickness and high density lipoprotein cholesterol were similar (p>0.05) among treatments. Results demonstrate that supplementing 18 to 27 mg/kg diet of rice bran octacosanol can improve laying rate and egg quality and reduce blood lipid of laying hens.

• KSBB Journal
• /
• 제7권4호
• /
• pp.258-264
• /
• 1992

효모를 이용한 에탄올 발효에서 세포 농도가 130g/L일 때 배양액은 약간의 가소성 유체의 성질을 보이며 세포 농도가 증가할수록 cell floc의 형성으로 인하여 세포 분리를 위한 막의 투과 성능은 향상되었다. 세포재순환 에탄올 발효에서 최적 세포농도를 발효액의 유변학적 성질, 막의 투과 성능, 그리고 에탄올 생산성을 고려하여 결정하였다. 또한 최적의 세포 농도에서 최대 에탄올 생산성과 최대 포도당 전환율을 위한 희석 속도를 최적화하였다. 최적의 세포 농도는 130g/L이었고 이 농도에서 최적의 희석 속도는 $1.3h^{-1}$이었다.

• Journal of Ecology and Environment
• /
• 제33권3호
• /
• pp.253-260
• /
• 2010

It has been well established that leaf longevity is linked to the carbon economy of plants. We used this relationship to predict leaf lifetime carbon gains from leaf lifespan, and estimated the gross primary production (GPP) of a young deciduous forest of Japanese beech (Fagus crenata) located in central Japan. The light-saturated photosynthetic rates of the leaves were measured repeatedly during the growing season. We used the leaf lifespan to calculate the conversion coefficient from the light-saturated photosynthetic rate into the realized leaf lifetime carbon gain under field conditions. The leaf turnover rate was estimated using litter traps. GPP was estimated as the product of lifetime carbon gain per unit of leaf mass, and the annual leaf turnover rate. The GPP of the forest in 2007 was estimated to be $1.2{\times}10^3gCm^{-2}y^{-1}$, which was within the range of previously reported GPP values of beech forests in Japan, and was close to the GPP of a European beech forest, as estimated by eddy flux measurements.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.9-21
• /
• 2002

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the heat transfer rate in cylindrical bed reactor packed with calcined Dolomite. Two dimensional (radial and circumferential) Partial differential equations, concerning heat and mass transfer in packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction of calcined Dolomite and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion of reactant in the packed bed reactor and the amount of exothermic heat released from the reactor are follows. It was found that all of calcined Dolomite packed bed kept the reaction temperature of about 750K throughout the entire part of the bed, immediately after the steam was introduced exothermic reaction of hydration was proceeded from the packed bed inpu to output and from wall side to center. The rate of thermochemical reaction depends on the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.225-231
• /
• 2021

The reaction between Li₂CO₃ and Cl₂ was investigated to verify its occurrence during a carbon-anode-based oxide reduction (OR) process. The reaction temperature was identified as a key factor that determines the reaction rate and maximum conversion ratio. It was found that the reaction should be conducted at or above 500℃ to convert more than 90% of the Li₂CO₃ to LiCl. Experiments conducted at various total flow rate (Q) / initial sample weight (W_i) ratios revealed that the reaction rate was controlled by the Cl₂ mass transfer under the experimental conditions adopted in this work. A linear increase in the progress of reaction with an increase in Cl₂ partial pressure (pCl₂) was observed in the pCl₂ region of 2.03-10.1 kPa for a constant Q of 100 mL·min^-1 and W_i of 1.00 g. The results of this study indicate that the reaction between Li₂CO₃ and Cl₂ is fast at 650℃ and the reaction is feasible during the OR process.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.44-49
• /
• 2009

Steam reforming of methane in the high temperature solar chemical reactor bas advantage in its heating method. Using concentrated solar energy as a heating source of the reforming reaction can reduce the $CO_2$ emission by 20% compared to hydrocarbon fuel. In this paper, the simulation result of methane-steam reforming on a high temperature solar chemical reactor(SCR) using Fluent 6.3.26 is presented. The high temperature SCR is designed for the Inha Dish-1, a Dish type solar concentrator installed in Songdo city. Basic SCR performance factors are referred to the former researches of the same laboratory. Inside the SCR porous metal is used for a receiver/reactor. The porous metal is carved like a dome shape on the incident side to increase the heat transfer. Also, ring-disc set of baffle is inserted in the porous metal region to increase the path length. Numerical and physical models are also used from the former researches. Methane and steam is mixed with the same mole fraction and injected into the SCR. The simulation is performed for a various inlet mass flow rate of the methane-steam mixture gas. The result shows that the average reactor temperature and the conversion rate change appreciably by the inlet mass flow rate of 0.0005 kg/s.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2896-2900
• /
• 2007

A numerical analysis was carried out to investigate the degradation of Volatile Organic Compounds (VOC) in photocatalytic microreactors with different inner geometries. Two different cases of microreactor were considered, namely, one microreactor has bump on the channel and the other has no bump on the channel. The removal efficiency of VOC has been calculated by the Langmuir-Hinshelwood reaction rate equation that was obtained from the experimental results. From the numerical calculations, it was observed that the conversion ratio of VOC for the microchannel with bump is about 4.5% greater than the microchannel without bump. And the mass transfer characteristics in the microreactor are also shown in numerical results. These results can be used effectively for the photocatalytic numerical analysis.