• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.77-81
• /
• 1997

Removal of nitrogen compound from waste water is essential and often accomplished by biological process. To prevent washout and to develop an efficient bioreactor, immobilization of sutibal microorganisms could be sensible approach. Strains and permeabilized cell encapsulated in cellulose nitrate microcapsules and immobilized on polystyrene films were prepared by the method described in the previous study. In the wastewater treatment system, nitrification of ammonia component is generally known as rate controlling step. To enhance the rate of nitrification, firstly nitrifying strains Nitrosomonas europaea(IFO14298), are permeabilized chemically, and immobilized on polystyrene films and secondly oxidation rates of strain system and permeabilized strain system are compared in the same condition. with 30 minute permeabilized cells, it took about 25 hours to oxidize 70% of ammonia in the solution, while it took about 40 hours to treat same amount of ammonia with untreated cells. All the immobilization procedures did not harm to the enzyme activity and no mass transfer resistance through the capsule well was shown. In the durability test of immobilized system, the system showed considerable activity for the repeated operation for 90 days. With these results, the system developed in this study showed the possibility to be used in the actual waste water treatment system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.405-406
• /
• 2005

A theoretical investigation of the solid-phase mechanochemical synthesis of nano-sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3-mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact-friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano-TlCl by dilution of initial (2NaCl + $Tl_2SO_4$) mixture with the exchange reaction product (diluent, $zNa_2SO_4$, $z=z^*=11.25$) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano-TlCl obtained experimentally were compared with those for the model reaction KBr + TlCl + zKCl = (z + 1) KCl + TlBr ($z=z_l^*=13.5$), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.38-46
• /
• 2020

The accurate measurement of critical heat flux (CHF) in flow boiling is important for the safety requirement of the nuclear power plant to prevent sharp degradation of the convective heat transfer between the surface of the fuel rod cladding and the reactor coolant. In this paper, a System Engineering approach is used to develop a model that predicts the CHF using machine learning. The model is built using artificial neural network (ANN). The model is then trained, tested and validated using pre-existing database for different flow conditions. The Talos library is used to tune the model by optimizing the hyper parameters and selecting the best network architecture. Once developed, the ANN model can predict the CHF based solely on a set of input parameters (pressure, mass flux, quality and hydraulic diameter) without resorting to any physics-based model. It is intended to use the developed model to predict the DNBR under a large break loss of coolant accident (LBLOCA) in APR1400. The System Engineering approach proved very helpful in facilitating the planning and management of the current work both efficiently and effectively.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.22-29
• /
• 1996

Immobilized bioprocess was carried out for continuous production of cyclosporin A (CyA) produced intracellularly as a secondary metabolite by a filamentous fungus, Tolypocladium inflatum. Immobilization procedure for entrapping conidiospores of the producer was significantly simplified by use of a modified immobilization technique. A newly-designed immobilized perfusion reactor system (IPRS) showed good process benefits as demonstrated by the role of the high density immobilized cells as an efficient biomass generator, continuously supplying highly active CyA-producing free cells (1.0g/$\ell$/hr) even at very high dilution rate ($0.1hr^{-1}$). IPRS bioprocess was possible since efficient decantor system developed in our laboratory separated the sloughed-off free cells from the immobilized biomass effectively, thus overcoming wash-out phenomenon frequently encountered in continuous free cell cultures. Furthermore the released-free cells remaining in the bulk solution did not appear to cause substrate mass transfer limitation which was often experienced in suspended mycelial fungal cell fermentations. The primary reason for this was that the suspension broth of the IPRS mainly consisted of roundshaped short mycelial fragments and conidiospores, still remaining Newtonian even at high cell density. In parallel with IPRS bioprocess development, other key factors to be considered necessarily for significant increase in CyA productivity would be strain improvement and medium optimization for the immobilized cells.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.85-95
• /
• 2018

In this research, a biofilter system equipped with a biofilter process and a humidifier composed of a fluidized aerobic and an anoxic reactor, was constructed to treat odorous waste air containing hydrogen sulfide, ammonia and VOC, frequently generated from pig and poultry housing facilities, compost manufacturing factories and publicly owned facilities. Its optimum operating condition was revealed and discussed. In the experiment of complex feed, the ammonia of fed-waste air was removed by ca. 75% and more than 20% at the stage of the humidifier and the biofilter, respectively. The toluene of the fed-waste air was removed by ca. 20% and more than 70% at the stage of the humidifier and the biofilter, respectively. Therefore the water-soluble ammonia and the water-insoluble toluene were treated mainly at the stage of the humidifier and the biofilter, respectively. In addition, hydrogen sulfide was almost absorbed at the stage of the humidifier so that it was not detected at the biofilter process. In the experiment of ammonia-containing feed, the ammonia of fed-waste air was removed by ca. 65% and 35% at the stage of the humidifier and the biofilter, respectively. Its removal efficiency of ammonia at the stage of the humidifier was 10% less than that in the experiment of complex feed, due to no supply of such carbon source as toluene required in the process of denitrification. In the experiments of complex feed, ammonia-containing feed with and without (instead, glucose) the addition of yeast extract, the absorption rates of ammonia-nitrogen were ca. 0.28 mg/min, 0.23 mg/min and 0.27 mg/min, respectively. The corresponding denitrification rates in the anoxic reactor were 0.42 mg/min, 0.55 mg/min and 0.27 mg/min, respectively. In addition, in the modeling of bubble column(the fluidized aerobic reactor of the humidifier) process, the value of specific surface area(a) of bubbles multiplied by enhanced mass transfer coefficient (E $K_y$) was evaluated to be 0.12/hr.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.92-99
• /
• 2002

This work investigated the optimal condition for an uniform deposition growth rate in the vertical cylindric CVD chamber. Heat transfer, surface chemical reaction and mass diffusion in the flow field of CVD chamber h,id been computed using Fluent v5.3 code. A SIMPLE based finite Volume Method (FVM) was adopted to solve the fully elliptic equations for momentum, temperature and concentration of a chemical species. The numerical analysis results show good agreements with the measurements obtained by N. Yoshikawa. The results obtained by the numerical analysis showed that the film growth rate in the center of a susceptor is increasing, as the inner flow approaches to the forced convection. To the contrast, as it approaches to the natural convection, that in the outside of a susceptor is increasing. As the Reynolds number increases, the uniformity may not hold due to the larger temperature gradient at a susceptor surface. Therefore, when the temperature gradient on the surface of a susceptor is zero, the film growth rate becomes uniform on most surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2107-2113
• /
• 2000

Toxicity estimation of three nonionic surfactants (Brij 30, Tween 80, Triton X-lOO) and their effect on the biodegradation of polycyclic aromatic hydrocarbons (PAHs) in the aqueous phase and soil slurry phase were investigated. Brij 30 was found to be the most biodegradable among the surfactants tested, and showed no substrate inhibition up to a concentration of 1.5 g/L. It was definitely utilized as a carbon source by the microorganisms. Naphthalene and phenanthrene in the aqueous phase were completely degraded by phenanthrene-acclimated cultures within 60 hours, but a substantial amount of naphthalene was lost due to the volatilization. The limiting step in the soil slurry bioremediation was bioavailablity by the microorganisms in the sand slurry and mass transfer from a solid to aqueous phase in the clay slurry. TOC analysis revealed that most of substrates including surfactant in the reactor were degraded. pH transition indicated that phenanthrene was metabolized into intermediates containing acid function.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.113-123
• /
• 1990

Tungsten film was deposited on the single crystal silicon wafer in a low pressure chemical vapor deposition reactor from silane and tungsten hexafluoride in the temperature range of $250-400^{\circ}C$ Deposition rate was found to be determined by the mass transfer rate of reactants from the gas phase to the safter surface. It was found out that tungsten films deposited contained about 3 atomic $\%$ of silicon and that the crystallinity and the grain size increased as the deposition temperature was increased. The resistivity of the film was measured to be in the range of $7~25{\mu}{\Omega}-cm$ and decreased with increasing deposition temperature. The adhesion of the tungsten film on a silicon surface was measured by the tape peel off test and it was improved with increasing deposition temperature. From the analysis of the gas composition, the reaction pathway to form $SiF_{4}$ and $H_{2}$ was found to be more favorable than HF formation.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.663-669
• /
• 2017

Activated carbons were prepared from waste citrus peels using KOH, NaOH, and $ZnCl_2$ as activating chemicals. They were prepared at optimal conditions including the chemical ratio of 300%, activation time of 1.5h, and activation temperature of $900^{\circ}C$ for KOH, $700^{\circ}C$ for NaOH, and $600^{\circ}C$ for $ZnCl_2$, which were named as ACK, ACN, and ACZ, respectively. Using the activated carbons, their adsorption characteristics for three target gases such as acetone, benzene, and methylmercaptan (MM) were carried out in a batch reactor. The adsorption behavior of activated carbons for three target gases followed the Freundlich model better than the Langmuir. And the experimental kinetic data followed a pseudo-second-order kinetic model more than pseudo-first-order one. Following the intraparticle diffusion model suggested that the external mass transfer and particle diffusion were occurred simultaneously during the adsorption process.