• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.352-357
• /
• 2007

Since a pattern defects "repair" system using a diode pumped solid state laser for Flat Panel Display (FPD) was suggested, a lot of laser systems have been explored and developed for mass-production microfabrication process. A maskless lithography system using 405 nm violet laser and Digital Micromirror Device (DMD) has been developed for PDP and Liquid Crystal Display (LCD) Thin Film Transistor (TFT) photolithography process. In addition, a "Laser Direct Patterning" system for Indium Tin Oxide (ITO) for Plasma Display Panel(PDP) has been evaluated one of the best successful examples for laser application system which is applied for mass-production lines. The "heat" and "solvent" free laser microfabrications process will be widely used because the next-generation flat panel displays, Flexible Display and Organic Light Emitting Diode (OLED) should use plastic substrates and organic materials which are very difficult to process using traditional fabrication methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.94-110
• /
• 1997

In the present study, a mean torque predictive model has been proposed and experimentally validated. It includes induction air mass model, fuel delivery model and mean production mode. Air induction and fuel delivery model considering dynamic behaviors of air induction and fuel delivery were proposed to predict the air-fuel ratio excursions under transient condition. Torque function model reflects thermal efficiency, volumetric efficiency, friction and effect of spark timing. In the spark timing model, knock limit and acceleration retard are included. Experiments were carried out to validate the simulation model for the step changes of throttle at constant engine speed. The results show reasonable agreements between simulation and experiment at fully warmed condition. Using this model, fueling strategies are varied with fast throttle open and it can predict air-fuel ratio excursion and IMEP.

• Vacuum Magazine
• /
• v.2 no.4
• /
• pp.16-26
• /
• 2015

Carbon nanomaterials including nanocrystalline diamond and graphene films are expected to play a core role in $21^{st}$ century industries due to their amazing physicochemical properties. To achieve their practical utilization and industrialization, the development of their mass production technologies is strongly required. Recently, a surface wave excited plasma (SWP) which is produced using microwaves has been attracting special attentions as a candidate for the mass production technology of carbon nanomaterials. SWP can allow a low-temperature large-area plasma chemical vapor deposition (CVD) system. Here, this article introduces the promising SWP-CVD technology. Plasma characteristics in a SWP will be introduced in detail to help understanding how to use and control a SWP as a plasma source for CVD applications.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.85-98
• /
• 1997

Cultural conditions for mass production of the antagonistic bacteria, Bacillus subtills CAP141 against pathogens causing major airborne diseases to apple trees, effects of temperature, pH, carbon and nitrogen source in the culture broth were investigated. The bacterial growth was most vigorous when the temperature and pH of the culture broth was 30~35$^{\circ}$C and 7, respectively. As for carbon source, dextrose was best followed in order by dextrose(monosaccharide) > sucrose(disaccharide) $\geq$ saccharose (market disaccharides) > starch (polysaccharieds). Among different sugars, bacterial growth was favored by in the order of brown, black and white supars, indicating that the bacterial growth might be promoted by the minor elements presented as impurities in the less purified sugars. As for nitrogen source, organic forms were better to bacterial growth than inorganic forms, that is polypeptone was best followed in order by soy sauce, soybeen milk and inorganic nitrogens. Differences in bacterial growth among different forms of inorganic nitrogen were negligible.

• Journal of Sericultural and Entomological Science
• /
• v.42 no.2
• /
• pp.99-103
• /
• 2000

This study was carried out to investigate incubating characteristics, LTSEM observation, nature of a disease of infected silkworms(bombyx mori), LD$\_$50/, optimum infective condition for mass production and infection percentage(%) on conservation periods. On the V8 media, the colony was 0.5∼2.0cm/8 days in diameter and white or slighty colored with a white fluffy to powdery appearance. The conidia was subglobos in shape, zig-zag appearance, 1-celled, hyaline and 3.2$\times$2.4 ㎛ in size on the average. The conidiophore was irregular grouped, hyaline, rounded or flask-shaped. The LD$\_$50/ values of the 2nd and 4th silkworms were each other 6.6142(Log) in natural temperature and humidity (25$\^{C}$, 65%). On optimum infective condition for mass production, all of preservation time(hr.) postinoculation in 1.0$\times$10$\^$8/ conidia/㎖ was over 97% and only 20 hr in 1.0$\times$10$\^$7/ condia/㎖ was over 90%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.79-82
• /
• 2005

Fresnel lens has number of applications in the optical systems because of its advantages. It is nearly flat lens that has small weight. It is conventionally used in lighthouse beacons, condensing unit of overhead projector and etc. Recently, demands of small size optical systems such as display units, information storage systems, optical detecting units had increased. Conventional manufacturing process of high quality Fresnel lens is direct machining. But it is not suitable for mass production because of high cost and long cycle time. Replication process is more suitable for mass production. But the Fresnel lens has number of sharp blade shape prism. In the replication process, this blade shape causes defects that can affect optical efficiency. In this study, replication process of blade shape pattern that has maximum height of $280{\mu}m$, aspect ratio 1.4 for Fresnel lens application.

• Journal of the Korea Furniture Society
• /
• v.12 no.2
• /
• pp.51-59
• /
• 2001

Opening 21th Century, all the Countries of the world has been focusing on build up the foundation of cultural infrastructure in a various way, since the awareness of importance for cultural design products has been turnover. On the other hand, our cultural crafts＇ industry has not escaped from poor working environment and lagging behind conventional product system, and yet there is no complete system for mass production. The study is collaboration with Tourism Industry Innovation Center in Kwangju University for development of cultural products of wooden crafts by using cultural resources in Kwangju area and CNC M/C which is up-to-date digital technology. It aims to make possibility of mass production and discrimination on design for wooden crafts which is based on highly skilled technical manpower and creativities, and expects to develop and merchandise global wooden cultural products.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.432-435
• /
• 2006

A rapid and mass propagation method for multiple shoots and plant regeneration using bulb scales of Muscari comosum var. plumosum were developed. In vitro different parts of bulb scale as explants were cultured on 11 kinds of MS (1962) media supplemented with various plant growth regulators to induce shoot and callus. A combination of 2.0 mg/L 6-BA and 2.0 mg/L IBA on MS medium was the most favorable and induced the highest production (80%) of shoot formation after 30 days. We also found that the middle part of bulb scale was the best for mass propagation of Muscari comosum var. plumosum of which production could reach 64.4%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.250-253
• /
• 2009

Effective methods for monitoring the quality of polycrystalline silicon (poly-Si) films are discussed. Raman spectroscopy is typically used to determine crystallinity of poly-Si, but this method has limitations for data gathering on large substrates for mass production of poly-Si TFT backplanes. Spectroscopic ellipsometry is proposed as an alternative for fast and simple estimation of poly-Si quality on large substrates. By using both ellipsometry and Raman spectroscopy, it is possible to determine whether the quality and uniformity of the poly-Si films meet the criteria required for mass production of TFT backplanes for AMOLED panels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1136-1139
• /
• 2009

Recently, various Ni doping systems and thermal annealing systems have been developed for fabrication of polycrystalline silicon film using SGS (super grain silicon) for medium and largesize AMOLED panels. In this study, we compare the potential of Ni doping systems including ALD (atomic layer deposition), AMD (atmospheric metal deposition), in-line sputter, and crystallization annealing systems including batch type furnace, inline furnace, and RTA (rapid thermal annealing) developed for the SGS method. Additional requirements for those systems to be used for mass production of large AMOLED TVs are suggested based on evaluation results for both poly-Si films and TFT backplanes.