• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.359-371
• /
• 2007

Recently, many studies were reported accurate analysis of facemask effect due to the development of the personal computers and computer programs. The aim of this study is appropriate protraction direction of facemask using finite element study with computer aided design and computer aided measurement. The construction of the three dimensional FEM was based on the computer tomography(CT) scans of 13.5 year-old male subject. Protraction force of 500 mg was applied at 0, 30, 60 and 90 degrees downwards to the Frankfort horizontal plane, and maxillary displacement and stress distribution were measured. When 60 degree force was applied, it showed forward movement of premolar roots area and downward movement of anterior nasomaxillary area, and others showed clockwise rotation movement of the nasomaxillary complex. Finally, we can produce the protraction of maxillary bone without rotation of maxilla about 60 degrees.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 2005

The stack, the core unit of the MCFC system, is composed of the three main parts which are the electrodes, the matrix keeping the electrolyte and the separator. Among these, the separator made of low carbon steel is manufactured by some sheet metal forming processes. The flatness of flange of the mask plate of the separator is crucial not only to enhance the stack performance but also to reduce the production cost. This study has focused on the enhancement of flatness of the mask plate flange by controlling some process parameters like the punch and die comer radii, the blank holding force, the friction coefficient and so on. The springback phenomenon occurring in the flange drawing process has been studied first using the finite element method (FEM) in order to understand what causes the springback. The distribution pattern of local longitudinal stress in the flanged part has been revealed very important in predicting the final shape of the flange. This fact has been backed up by the experimental results carried out with the developed test dies.

• Journal of Welding and Joining
• /
• 제22권3호
• /
• pp.45-49
• /
• 2004

Generally, it is used the compensation spring to compensate the inaccuracy of screen image induced by thermal deformation in CRT monitor. Its mechanism is hi-metallic system made of heterogeneous metals and these springs are bonded by laser welding. But laser welding induces a non-uniform temperature distribution, and residual stress is yielded locally by these temperature deviation. Therefore, this study measures the curvature constant to assess functions of the compensation spring of shadow mask with respect to increment temperature and estimates the effect of residual stress on the performance of tri-metal used to compensation spring.

• 한국응용과학기술학회지
• /
• 제38권2호
• /
• pp.465-475
• /
• 2021

본 연구는 안면 마스크 착용에 따른 피부 스트레스 인식도와 뷰티 케어 현황조사를 목적으로 2021년 3월 11일-3월 27일 까지 210명을 대상으로 온라인과 오프라인을 이용하여 설문조사를 실시하였다. 수집된 자료는 SPSS 25.0을 이용하여 Cronbach's α, Frequency Analysis, chi-square test, One way Anova로 분석하였다. 코로나19 기간 중 일일 평균 마스크 착용 시간은 43.8%가 7시간 이상이며, 마스크 착용에 의한 피부 스트레스 인식도는 30대(M=4.27)와 서비스직(M=4.64)이 가장 높고 여드름, 피부 트러블(M=4.47) 고민이 있는 사람이 스트레스를 높게 인식하였다. 홈 케어 시 중요 요소는 클렌징(67.6%)이, 뷰티 케어 현황에서는 피부 관리(36.7%)가 가장 높았다. 뷰티 케어 선택 시 고려 사항은 서비스 및 고객관리 능력이 54.3%, 체형관리를 위한 방법은 운동이 45.7%로 가장 높게 나타났다. 본 연구 결과 안면 마스크의 장시간 사용으로 인해 피부 스트레스가 많이 인식되고 있으며 코로나 상황에 의해 피부 관리실 이용이 불안해짐에 따라 홈 케어 관리가 늘어난 것으로 나타났다.

• 산경연구논집
• /
• 제14권4호
• /
• pp.33-46
• /
• 2023

Purpose: During the coronavirus disease-19 (COVID-19) outbreak, mask-wearing is required to protect against and limit the spread of infection, but it can directly affect skin problems. Change in skin condition might be related to mental health. This study explored the association between skin conditions and behavior of skin cares and stress levels during the Covid-19pandemics. Research design, data and methodology: A survey was conducted on 516 adults who were aware of damaged skin due to continuous wearing of masks for a long time during the COVID-19 Pandemic. The study included 164 men and 352 women in the Republic of Korea. Results: Skin conditions and behavior of skin cares associated with stress perceptions. A multiple linear regression model was used adjusting for potential confounder. Conclusion: Since management so far in the COVID-19 Pandemic can cause skin concerns and change the original skin type, it is necessary to redefine and improve the use of skin care, face-washing methods, and functional cosmetics. People with high and low interest in skin type recognition and management were evenly identified, and it was confirmed that stress awareness decreases as awareness of skin care attitude increases.

• 천문학회보
• /
• 제37권2호
• /
• pp.209.2-209.2
• /
• 2012

UFFO Burst Alert & Trigger telescope (UBAT) is one of major instruments of UFFO-Pathfinder. The UBAT aims at 10 arcmin resolution localization of Gamma Ray Bursts with X-ray coded mask technique. It has $400mm{\times}400mm$ coded mask aperture, hopper, shielding and detector module with effective area of $191cm^2$. The detector module consists of an assembly of 36 64-ch MAPMTs and $25mm{\times}25mm$ pixellated YSO crystal array, and associated analog and digital electronics of about 2500 channels. We performed a vibration test using a dummy MAPMT with the detector module structure to measure the indused stress applied onto the MAPMT. We designed a sub-structure on the detector module to avoid the resonance that would otherwise deforms the detector module structure. A finite element analysis confirms the reduction of the load acceleration down to 12g. The experimental results are to be reported. Consequently, it proves that the MAPMT arrays of the flight UBAT detector module structure would survive in the space launch environment.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1021-1026
• /
• 1997

RuO2 thin film has reasonably good conductivity and stiffness and it is thought to substitute for the cantilever beam made up of Pt and Si3N4 double layers in microactuators. Therefore, anisotopic Si etching was performed using RuO2 thin film as a mask layer in 25 wt. % TMAH water solution. In the etching temperature ranging from 6$0^{\circ}C$ to 75$^{\circ}C$, the etch rates of all the crystallographic directions increased linearly as the etching temperature increased. The etch rate ratio(selectivity) of [111]/[100] which varied from 0.08 to 0.14, was not sensitive to temperature. The activation energies for [110] direction, [100] direction and [111] direction were 0.50, 0.66 and 1.04eV, respectively. RuO2 cantilever beam with a clean surface was formed at the etching temperatures of 6$0^{\circ}C$ and $65^{\circ}C$. But the damages due to formation of pin holes on RuO2 surface were observed beyond 7$0^{\circ}C$. The tensile stress of RuO2 thin films caused the cantilever bending upward. As a result, it was demonstrated that the formation of conducting oxide RuO2 cantilever beam which can replace the role of an electrode and supporting layer could be possible by TMAH solution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2536-2538
• /
• 1998

This paper investigates the residual stress of tetraethoxysilane (TEOS) and 7wt% phosphosilicate glass (PSG), which are commonly used as a sacrificial layer or etch mask in the fabrication of microelectromechanical systems (MEMS). In order to measure residual stress, $2{\mu}m$ thick TEOS and PSG stress measurement structures are fabricated. Polysilicon is used as the sacrificial layer. First the residual stress of an as-deposited 7wt% PSG flim and TEOS film are measured to be-0.3115% and -0.435%, respectively, which are quite large. These films are annealed from $500^{\circ}C$ to $800^{\circ}C$. Annealing has the effects of reducing residual stress. In the case of the 7wt% PSG film, the residual stress becomes +0.00715% after annealing at $625^{\circ}C$ for 150 minutes. In the case of TEOS film, the residual stress reduces to -0.2134% after same condition. Incidentally, this condition is the same condition for depositing a $2{\mu}m$ thick polysilicon at $625^{\circ}C$ at our low pressure chemical vapor deposition (LPCVD) furnace.

• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.75-81
• /
• 1998

본 논문은 장방형 다이아프램 형상과 단일형 피에조저항 전단응력 스트레인 게이지 와의 관계를 해석하여 최적의 전단응력 압력센서를 설계하기 위한 것이다. 다이아프램상의 전단응력을 시뮬레이션 하기 위하여 유한요소법 분석 프로그램 ANSYS 5.1를 사용하였다. 시뮬레이션 결과는 다이아프램 형상비가 3일때 스트레인 게이지의 위치는 중앙에서, 크기는 전체 장방형 다이아프램 크기의 8%를 점유할때 온도에 안정적이고, 최대 감도를 가진다는 것을 조사하였다.

• 한국재료학회지
• /
• 제10권3호
• /
• pp.218-222
• /
• 2000

W에 소량의 Ti를 첨가하여 그 함량 변화에 따른 X-선 마스크 흡수체용 W-Ti 박막의 물성을 연구하였다. W-Ti 박막은 DC magnetron sputtering system을 이용하여 증착하였다. Sputtering 증착시 증착압력의 증가에 따라 박막의 밀도는 감소하였으며 박막의 응력은 압축응력으로 바뀌었다. Ti 함량이 증가함에 따라 천이 압력 근방에서의 응력곡선의 기울기가 감소하였으며 천이 압력도 점차 낮아지는 경향을 보였다. Pure-W 시편의 경우 천이 압력이 약 6.5mTorr로 비교적 높았으며, 이 때 박막의 밀도는 $17.8g/\textrm{cm}^3$이었고 함량 6.5%에서 가장 낮은 천이 압력(4.3mTorr)을 보였으며, 이때의 박막 밀도는 $17.7g/\textrm{cm}^3$로 pure-W과 거의 차이가 없음을 알 수 있었다. SEM을 이용한 미세구조 분석결과 pure-W 박막은 원형의 주상정 조직을 보이고 있으며, Ti가 첨가된 W-Ti 박막의 경우에는 가늘고 긴 침상 모양을 가지는 주상정 조직을 형성하고 있다. 또한 이러한 침상조직은 Ti함량이 증가할수록 더욱 발달하고 있으며, AFM 분석결과 Ti 첨가 시편 모두 $18{\AA}$이하의 우수한 평균 표면 평활도를 나타내었다. 나타내었다.