• 제목/요약/키워드: Maritime-target

검색결과 371건 처리시간 0.026초

고성능 저발열 자기충전 콘크리트의 최적 배합설계 (Optimal Mix Design of High-Performance, Low-Heat Self-Compacting Concrete)

  • 김영봉;이준해;박동천
    • 한국건축시공학회지
    • /
    • 제22권4호
    • /
    • pp.337-345
    • /
    • 2022
  • 해안지역 초고층 콘크리트 건축물 매트기초는 상하층 응력발생으로 인한 결함예방과 원활한 공정관리를 위해 일반적으로 일체타설이 요구되지만 일체타설의 경우 수화열에 의한 온도응력 균열 발생의 우려가 있으며 다짐에 대한 시공성을 확보하기 위해 높은 수준의 자기충전성의 콘크리트 배합이 필요하다. 본 연구에서는 이러한 요구성능을 만족할 수 있도록 고성능 분사제와 혼화재의 사용량을 실험변수로 배합 실험을 통해 최적량을 도출하고자 하였다. 배합 변수별 결과분석을 통해 단위수량은 155kg/m3, 결합재에서 시멘트 비율 18% 일 때 굳지 않은 콘크리트 물성 및 강도발현 목표값을 만족하는 것으로 나타났다. 4성분계(시멘트 18%, 슬래그미분말 50%, 플라이애시 27%, 실리카흄 5%)가 사용되었다.

인덕션 집어등을 설치한 갈치채낚기 어선의 복원성능 (Stability of hair-tail angling fishing boat according to the induction fishing lamp installation)

  • 정성재;박성욱;정명국;정금철
    • 수산해양기술연구
    • /
    • 제59권1호
    • /
    • pp.1-8
    • /
    • 2023
  • In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m2. Before installing the induction fishing lamp, G0M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G0M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.

폐 MgO-C계 내화재의 전기로(EAF) 제강 Flux용 경소돌로마이트 대체 사용 연구 (A Study on the Replacement of a Light Burnt Dolomite with a Waste MgO-C Refractory Material for a Steel-Making Flux in Electric Arc Furnace)

  • 김현종;임종덕;김행구;왕제필
    • 자원리싸이클링
    • /
    • 제31권6호
    • /
    • pp.44-51
    • /
    • 2022
  • 현재 전기로(EAF) 제강 공정에서는 내화재 보호 및 탈황능 개선을 위해 MgO 함유 Flux인 경소돌로마이트를 사용하고 있으며, 탈산 효과와 동시에 Slag foaming을 통한 전력에너지를 저감시키기 위해 가탄제를 투입하고 있다. 본 연구에서는 상기 효과들을 경제적으로 달성하기 위해 폐 MgO-C계 내화재를 사용하고자 한다. 폐 MgO-C계 내화재는 현재 대부분 재활용되지 못하고 폐기되고 있는 실정이지만 다량의 MgO와 흑연 성분을 함유하고 있어 제강용 Flux로서의 효용가치가 입증되면 대량 재활용이 가능할 것으로 기대된다. 본 실험에서는 상용 EAF slag 조성을 토대로 Target 조성 범위를 설정하였다. Target EAF slag가 원만히 형성될 수 있도록 하기 위해 Flux와 함께 투입될 Pre-melt base slag를 제조하였다. Pre-melt base slag는 SiO2, Al2O3, FeO를 혼합하여 알루미나 도가니에 장입 후 1450℃에서 1시간 이상 가열하여 제조하였다. 이후 제조된 Pre-melt base slag에 혼합 Flux #2(경소돌로마이트+폐 MgO-C계 내화재+석회석)을 가하여 용융반응 시험을 수행하고 그 결과를 기존 제강 Flux에 해당하는 혼합 Flux #1(경소돌로마이트+석회석) 경우와 비교 평가하여 그 대체 가능성을 평가하였다. 신뢰성있는 평가를 도출하기 위해 XRD, XRF 및 Slag foam height, Slag basicity, 철 회수 등의 평가를 종합하였다.

기후변화 및 도시화를 고려한 수자원관리 대안의 효과 분석 (Effectiveness Analysis of Alternatives for Water Resources Management Considering Climate Change and Urbanization)

  • 박경신;정은성;김상욱;이길성
    • 한국수자원학회논문집
    • /
    • 제42권12호
    • /
    • pp.1103-1111
    • /
    • 2009
  • 본 연구에서는 도시화와 기후변화에 대한 미래시나리오를 구성하고 각각의 시나리오별로 수자원 관리 대안들에 대한 효과분석을 수행하였다. 기후변화 시나리오는 SDSM (Statiatical Downscaling Method) 모형을 이용하여 구축하였으며 도시화는 불투수면 모형(Impervious cover model, ICM)을 이용하였다. 안양천 유역에 대해 하수처리수 재이용, 저수지 재개발 대안들을 유황곡선(flow duration curve)과 BOD 농도지속곡선(concentration duration curve)의 변화측면에서 연속유출모형인 HSPF (Hydrological Simulation Program - Fortran) 모형을 이용하여 분석하였다. 그 결과, 시나리오별 하천 유출량에 대한 대안 효과의 차이가 고수량 ($Q_{10},\;Q_5,\;Q_1$)에 비해 저수량($Q_{99},\;Q_{95},\;Q_{90}$)과, 수질오염($C_{30},\;C_{10},\;C_1$) 측면에서 크게 나타남을 알 수 있다. 즉 도시화는 물 순환을 크게 악화시키나 대안의 적용이 이러한 현상을 크게 막아줌을 알 수 있다. 또한 목표 유지유량 및 목표 수질 만족일수는 도시화에 대해 매우 민감한 것으로 나타났다. 따라서 향후 수자원 관리 대안을 수립할 때 기후변화와 도시화에 대한 분석을 포함시키는 것이 바람직하다.

자동화 굴삭로봇의 운용단위 작업계획수립을 위한 로컬영역설계모듈 개발 (Development of the Local Area Design Module for Planning Automated Excavator Work at Operation Level)

  • 이승수;장준현;윤차웅;서종원
    • 대한토목학회논문집
    • /
    • 제33권1호
    • /
    • pp.363-375
    • /
    • 2013
  • 오늘날 숙련된 굴삭기 운전자의 부족현상은 갈수록 심화되고 있으며, 자원개발 및 새로운 생활공간 창출 등을 목적으로 운전자가 접근하기 어려운 극한환경에서 토공작업의 필요성이 증가함에 따라 전 세계적으로 토공완전자동화를 위한 무인화 굴삭로봇 개발의 노력이 경주되고 있다. 국내에서도 지난 2006년 말부터 국토해양부 건설기술혁신사업의 일환으로 '지능형 굴삭시스템' 연구단을 구성하여 연구를 지속하고 있다. 본 논문에서는 지능형 굴삭시스템의 작업계획생성시스템이 갖추어야 할 세부요소기술 중, 굴착작업의 위치, 범위, 목표, 순차 등 굴삭로봇의 운용단위 작업명령정보를 생성하기 위한 정보화단위를 제공하는 로컬영역설계모듈의 연구개발내용에 대하여 설명한다. 로컬영역의 설계는 굴삭로봇의 제원, 작업메커니즘, 휴리스틱 및 구조적안전성 등 여러 영향요소가 고려되어야 안전하고 효율적인 굴착작업을 보장하는 작업계획을 생성할 수 있다. 따라서 로컬영역의 설계요소를 분석하기 위하여 현장조사를 통한 개념적 설계를 수행하고, 상세설계를 통해 설계변수를 도출하였으며, 휴리스틱 및 구조적 해석요건을 만족하도록 설계내용을 정량화하였다. 마지막으로 로컬영역설계모듈을 개발하기 위한 알고리즘을 구축하고, 개발된 모듈을 검증하였다.

SWMM 분석을 통한 투수성 포장의 유출 저감 특성 평가 (Performance Evaluation of the Runoff Reduction with Permeable Pavements using the SWMM Model)

  • 임무광;류성우;박대근;이재훈;조윤호
    • 한국도로학회논문집
    • /
    • 제17권4호
    • /
    • pp.11-18
    • /
    • 2015
  • PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

다공질 장석으로 제조한 축열층의 열전도 특성 (Thermal Conductivity Effect of Heat Storage Layer using Porous Feldspar Powder)

  • 김성욱;고대홍;최은경;김성환;김태형;이규환;조진우
    • 자원환경지질
    • /
    • 제50권2호
    • /
    • pp.159-170
    • /
    • 2017
  • 다공성 구조의 장석과 주택 시방기준으로 제작된 바닥 축열층 모르타르의 열적 특성과 소비전력을 비교하였다. 실험을 위해 온수관이 설치된 2개의 실대형 모형을 제작하였다. 자외선 열화상 온도와 온도센서를 이용하여 가열과 냉각과정에서 축열층의 온도변화를 모니터링하였다. 시험동의 축열층은 $20-30^{\circ}C$ 구간의 온도 범위의 가열조건에서 $2-3.5^{\circ}C$ 높은 온도를 보였고 목표 온도에 도달하는 시간이 단축되었다. 온수관에서 멀어질수록 $4-4.8^{\circ}C$ 이상의 차이를 보였고 이는 장석 기반의 모르타르 축열층이 열적 평형에 빨리 도달하는 것을 지시한다. 가열 온도 $30^{\circ}C$를 기준으로 산정한 소비전력은 2.2배 차이를 보였고 단계별 온도 상승에서 소비전력은 66% 절감되었다. 냉각에서 시험동의 표면온도는 지속해서 $2^{\circ}C$ 이상 높았고 축열로 인해 보일러의 재가동 시간이 연장되는 것을 고려하면 에너지 효율은 더 증가할 것이다.

L-band 위성통신 시스템을 위한 극소형 25 Watt 고출력증폭기에 관한 연구 (A Study on the Ultra Small Size 25 Watt High Power Amplifier for Satellite Mobile Communications System at L-Band)

  • 전중성;예병덕;김동일
    • 한국항해항만학회지
    • /
    • 제26권1호
    • /
    • pp.22-27
    • /
    • 2002
  • 본 논문에서는 hybrid 기법을 이용하여 INMARSAT 위성의 상향 주파수인 L-HAND(1.6265∼1.6465 GHz)에서 동작하는 위성단말기용 25 Watt C급 고출력증폭기를 설계 ·제작하였다. 제작의 간편성을 위해서 전력증폭기를 크게 구동증폭단과 전력증폭단으로 나누어 구현하였으며, 전력증폭단을 구동하기 위한 구동단은 Motorola사의 MRF-640을 사용하여 2단으로 구성하였고, 전력증폭단은 MRF-16006과 MRF-16730을 사용하였다. 또 각 부에 직류 전원을 공급하기 위해 바이어스 회로부를 같은 하우징 내에 장착하여 무게 및 부피를 최소화하였다. 제작된 고출력증폭기는 20 MHz 대역폭 내에서 이득이 30 dB 이상, 입 ·출력 정재파비는 1.7 이하의 특성을 가졌다. 1.635 GHz 주파수에 대해 1 dB 압축점의 출력전력은 44 dBm 으로서 설계시 목표로 했던 출력전력 25 Watt를 상회하였다. 본 논문에서 제시한 SSPA(Solid State Power Amplifier) 제작 기법은 각종 Radar 및 SCPC(Signal Channel Per Carrier)용 전력증폭기 설계 및 제작에도 적용할 수 있다.

제주바다목장해역에서 수중음향과 어획데이터를 활용한 저층 어류의 현존량 추정 (Estimation of demersal fish biomass using hydroacoustic and catch data in the marine ranching area (MRA) of Jeju)

  • 이재봉;오택윤;연인자;김병엽;신현옥;황보규;이경훈;이유원
    • 수산해양기술연구
    • /
    • 제48권2호
    • /
    • pp.128-136
    • /
    • 2012
  • Hybrid surveys using hydroacoustic and fish sampling gears such as trammel net, trap were conducted to investigate total biomass, distribution and dominant fish species of the demersal fishes in the marine ranching area (MRA) of Jeju. Four surveys were carried out in June, August, October and November using 38kHz quantitative echo sounder. Catch data using trammel net and trap were used to calculate biomass and to examine dominant fish species. Fish schools were mainly detected in the waters of 20 meters below and around Chagwido waters. By the result of fishing experiments, fish species living in MRA of Jeju were about 40 species, dominant fish species of a detectable fish such as Family Sparidae and Family Monacanthidae etc. were identified 59.4~68.8% of total biomass. Based on the hydroacoustic data, fish length-weight function and target strength information, mean density of the demersal fish estimated were as follows; 0.88g/$m^2$ on June, 1.12g/$m^2$ on August, 1.35g/$m^2$ on October and 1.18g/$m^2$ on November. An estimated average biomass in MRA of Jeju was founded 20.5 tons in 2007, 20.6 tons in 2008, 23.0 tons in 2009, 25.9 tons in 2010. The results showed that biomass of MRA is getting increased slowly. Therefore the hybrid survey method using hydroacoustic and fish sampling gears is assured an effective biomass survey in the waters of mixed species.

FMCW 레이더를 이용한 원격 조류(鳥類) 관측 시스템 개발 (A Development of Remote Bird Observation System Using FMCW RADAR)

  • 이희용;황훈규;최명길
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제17권3호
    • /
    • pp.247-256
    • /
    • 2014
  • 최근, 조류 관측을 위하여 카메라나 레이더 등이 도입되어 보다 정확하고 효율적인 관측이 가능해지게 되었다. 특히, 레이더를 활용하여 조류를 관측하는 방법에 관한 연구가 활발하게 진행되고 있으며, 레이더 조류학이라는 분야가 생겨나게 되었다. 기상 레이더, 공항 탐색 레이더, 추적 레이더 등 여러 종류의 레이더가 조류 관측에 활용되고 있지만, 접근성을 비롯하여 경제성 및 이동성에 많은 제약을 가지고 있어 선박용 레이더가 널리 사용되고 있는 실정이다. 본 논문에서는 선박용 FMCW 레이더를 이용하여 원격 조류 관측 및 통계 분석 기능을 제공하는 시스템 개발에 관한 내용을 다룬다. 이를 위해 널리 알려져 있는 물표 인식을 위한 이미지 처리 기법을 적용하였다. 또한 개발한 시스템을 이용하여 두 차례 실험을 실시하였고, 움직이는 조류가 관측됨을 확인하였다. 그 결과, 각종 레이더 수치 값 조정 등의 개선점을 파악하고 이를 수정하였으며, 조류 관측 분야에 시스템의 적용가능성을 확인하였다. 개발한 시스템은 조류 관측에 관한 연구 뿐 아니라 환경 평가 등의 분야에 도입될 수 있을 것이며, 향후에는 조류 관측을 보다 정확하게 분석하여 통계내고, 조류의 이동 경로를 추적하는 것에 관한 연구가 필요하다.