• 제목/요약/키워드: Maritime Channel

검색결과 385건 처리시간 0.024초

Estimation of Harbor Responses due to Construction of a New Port in Ulsan Bay

  • Lee, Joong-Woo;Lee, Hoon;Lee, Hak-Seung;Jeon, Min-Su
    • 한국항해항만학회지
    • /
    • 제28권7호
    • /
    • pp.619-627
    • /
    • 2004
  • Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. We also considered the increase of water depth at the entrance channel by dredging work up to 15 meters depth in order to see the dredging effect. Among several model analyses, the nonlinear and breaking wave conditions are showed the most applicable results. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

충돌위험도 모델을 이용한 관제 지원 시스템 개발에 관한 기초 연구 (A Basic study on Development of VTS support system by Risk of Collision Model)

  • 박상원;박영수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2015년도 춘계학술대회
    • /
    • pp.18-20
    • /
    • 2015
  • 우리나라 항구 주변에는 입 출항하는 선박으로 인하여 해상교통흐름이 복잡하다. 이러한 선박통항의 안전과 효율성을 증진하기 위해 우리나라에서는 해상교통관제 서비스를 시행하고 있다. 24시간 쉴 틈이 없는 해상교통 관제사들의 노력에도 불구하고 관제구역 내에서의 충돌사고는 지속적으로 발생하고 있으며, 위험 상황이 약 20분에 1회씩 발생하고 있는 것으로 분석되어 그 위험성은 크다고 할 수 있다. 이에 본 연구는 부산항관제 VHF채널을 3일간 청취하여, 교신내용을 분석하였다. 부산항관제 교신 중 통항에 관련된 사항을 충돌위험도 모델에 적용하여 위험도로 표현하였으며, 관제사들이 선박에게 권고 지시를 하는 시점의 위험도를 도출하였다. 충돌위험도 모델의 위험도는 관제사가 관제시의 의사결정을 지원하는 하나의 수단으로 이용될 수 있다.

  • PDF

OFDM 시스템에서 고속 적응형 PTS 기법을 이용한 PAPR 특성에 대한 연구 (A Study on PAPR Characteristic using High-speed adaptation PTS Method in OFDM System)

  • 성태경;김동식;조형래
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
    • /
    • pp.458-463
    • /
    • 2005
  • OFDM 통신방식은 주파수 선택적 페이딩 채널에서 무선 고속 데이터 전송에 적합한 통신방식이다. 그러나 송신단에서의 PAPR의 발생으로 전력증폭기에서 비선형 왜곡이 발생한다. 따라서 본 논문에서는 이 문제를 해결하기 위하여 SLM 방식과 PTS 방식을 결합한 SLM-PTS 결합방식을 제안하였다. 제안한 결합방식은 기존의 PAPR 저감기법에 비하여 시스템의 복잡도는 다소 증가하지만 PAPR 감소측면에서 높은 효율을 보임을 확인하였다. 또한, SLM, PTS 방식 및 SLM-PTS 결합방식에 대하여 16-QAM 변조를 사용한 경우와 반송파 수를 증가시킨 경우에 대한 시뮬레이션 결과, SLM-PTS 결합방식이 M, L=4, D=128, 256인 경우 BER 10-3 을 기준으로 약 3.5 dB의 PAPR 저감효과가 있었다.

  • PDF

교통용량에 따른 운항위험도와 항로폭과의 관계에 관한 연구 (Assessment on Navigational Stress and Fairway' Width according to Traffic Flow)

  • 성유창
    • 한국항해항만학회지
    • /
    • 제38권3호
    • /
    • pp.253-259
    • /
    • 2014
  • 최근 선박의 대형화 고속화가 진행되면서 항만의 변화와 항내 수역 혼잡의 증대 등 해상 교통에 많은 위험 요소가 늘어가고 있다. 최근 가장 첨예하게 대립되는 것이 항로폭을 적정하게 결정하는 문제이다. 현행의 항로폭 설계법은 해당 수역을 통항하는 최대 선박의 운동 성능을 중심으로 설계되고 있지만, 다양한 종류의 선박이 혼재되어 운항하고 있는 해상교통 환경을 고려하지 않고 있다. 본 연구에서는 항내 수역의 다양한 교통 상황을 설정하고, 교통(용)량을 고려한 항로 설계법을 제안하고 이를 현행 항로설계법과 비교하였다. 이를 위해 기존 항로 설계 방법을 정리하고, 항내 수역을 대상으로 하는 162개의 해상교통 시뮬레이션을 실시하였다. 이 결과를 바탕으로 각 선종별 선형 구성 및 교통량에 따른 환경스트레스값 즉 운항위험도를 추정하였다. 허용 교통량에 대한 적정 항로폭 모델식을 구하고, 실제 수역에 적용하였다. 현행 설계법에 따른 항로폭과 비교하고 그 유용성을 확인하였다.

부산항 안전항해환경 조성을 위한 지향등 설치방안 연구 (Study on Installation of Sector Lights for the Establishment of Safe Navigation Environment in Busan Port)

  • 정해상;이종철;김정록;국승기
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2019년도 추계학술대회
    • /
    • pp.87-88
    • /
    • 2019
  • 유도표지의 일종인 도등과 지향등은 고정된 위치에서 안전한 입항침로를 시각적인 방법으로 제공해주기 때문에 항해자가 전방을 주시하면서 시야를 빼앗기지 않고 자연스럽게 이용할 수 있어 심리적 안점감을 주는 매우 효과적인 항로표지이다. 부산항 북항은 부산항북항재개발사업 D-1 블록 신축공사 계획에 따른 부산북항도등 맹목구간 해소를 위해 지향등을 설치가 필요하고, 부산항 신항은 토도 제거로 선박 통항여건이 바뀌어 항로표지 정비가 필요하여 지향등 설치를 위해 기본설계를 하였다. 또한, 기본설계 결과를 항로표지 시뮬레이션과 비교하여 검증을 하였다. 이 연구는 향후 우리나라 항만에서 선박 안전유도를 위해 지향등을 설치하는데 유용한 자료로 활용될 수 있을 것이다.

  • PDF

동해에서 저주파 음파전파에 미치는 난수성 소용돌이의 영향 (Influence of a Warm Eddy on Low-frequency Sound Propagation in the East Sea)

  • 김봉채;최복경;김병남
    • Ocean and Polar Research
    • /
    • 제34권3호
    • /
    • pp.325-335
    • /
    • 2012
  • It is well known that sound waves in the sea propagates under the influence of sea surface and bottom roughness, the sound speed profile, the water depth, and the density of sea floor sediment. In particular, an abrupt change of sound speed with depth can greatly affect sound propagation through an eddy. Eddies are frequently generated in the East Sea near the Korean Peninsula. A warm eddy with diameter of about 150 km is often observed, and the sound speed profile is greatly changed within about 400 m of water depth at the center by the eddy around the Ulleung Basin in the East Sea. The characteristics of low-frequency sound propagation across a warm eddy are investigated by a sound propagation model in order to understand the influence of warm eddies. The acoustic rays and propagation losses are calculated by a range-dependent acoustic model in conditions where the eddy is both present and absent. We found that low-frequency sound propagation is affected by the warm eddy, and that the phenomena dominate the upper ocean within 800 m of water depth. The propagation losses of a 100 Hz frequency are variable within ${\pm}15$ dB with depth and range by the warm eddy. Such variations are more pronounced at the deep source near the sound channel axis than the shallow source. Furthermore, low-frequency sound propagation from the eddy center to the eddy edge is more affected by the warm eddy than sound propagation from the eddy edge to the eddy center.

선박운항자 의식 기반 충돌 위험도 모델을 이용한 관제 가이드 라인 개발에 관한 기초 연구 (A Basic Study on Development of VTS Control Guideline by Collision Risk model based on Ship's Operator's Consciousness)

  • 박상원;박영수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2015년도 추계학술대회
    • /
    • pp.20-23
    • /
    • 2015
  • 우리나라 항구 주변에는 입 출항하는 선박으로 인하여 해상교통흐름이 복잡하다. 이러한 선박통항의 안전과 효율성을 증진하기 위해 우리나라에서는 해상교통관제 서비스를 시행하고 있다. 24시간 쉴 틈이 없는 해상교통 관제사들의 노력에도 불구하고 관제구역 내에서의 충돌사고는 지속적으로 발생하고 있다. 하지만 VTS관제에 관한 절차는 없어 VTS관제사의 주관에 의한 관제를 실시하고 있는 실정이다. 이에 본 연구는 부산항관제 VHF채널을 3일간 청취하여, 교신내용을 분석하였다. 부산항관제 교신 중 통항에 관련된 사항을 충돌위험도 모델에 적용하여 위험도로 표현하였으며, 관제사들이 선박에게 권고 지시를 하는 시점의 위험도를 조우상황별, 관제사의 경력별, 주 야간별로 도출하였다. 충돌위험도 모델의 위험도는 관제사가 관제시점의 가이드라인으로 이용될 수 있다.

  • PDF

수중 통신 환경에서 Z·F 검출기법을 이용한 시공간 부호화 방식 연구 (The Study of Space-Time Code using Z·F Detection Technique for Underwater Communication Environment)

  • 박태두;박군열;정지원;김범무;전성민;이성로
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.405-408
    • /
    • 2013
  • 수중에서의 음향 통신의 성능은 신호의 다중경로 전달과정에 의해 발생하는 지역 확산 현상으로 인하여 인접간섭에 영향을 받는다. 그리고 음파를 이용한 주파수의 제한으로 인하여 낮은 전송 속도로 통신을 한다. 따라서 전송속도의 향상과 함께 인접간섭을 제거하기 위하여 수중 통신에 적합한 시공간 부호화 기술과 등화기 기술, 채널 부호화 기술이 필요하다. 본 논문에서는 이러한 기술들을 시뮬레이션을 통하여 수중 통신 시스템에 대한 분석을 하였다. 시뮬레이션 결과 본 논문에서 제시한 시공간부호화 기술, 터보부호화 기술, Zero Forcing 검출 기법을 이용하면 일반적인 수중 통신 보다 성능이 우수함을 알 수 있다.

  • PDF

An experimental study of a circular cylinder's two-degree-of-freedom motion induced by vortex

  • Kim, Shin-Woong;Lee, Seung-Jae;Park, Cheol-Young;Kang, Donghoon
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제8권4호
    • /
    • pp.330-343
    • /
    • 2016
  • This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.

Development of the Speed Limit Model for Harbour and Waterway(II) - The Method of Speed Limit Decision and Application -

  • Kim, Deug-Bong;An, Kwang
    • 해양환경안전학회지
    • /
    • 제21권3호
    • /
    • pp.274-282
    • /
    • 2015
  • This research is the result on calculating the logical speed limit through certain process which some elements must be considered on selecting the speed limit of harbour and waterway. The suggested speed limit select model on this research is processed from 1~6 steps by forming a professional group of experts. Each step has its information which 1st step(water division), 2nd step(selecting the model vessel and vessel applied with speed limit.), 3rd step(selecting the maximum and minimum speed range on each section), 4th step(evaluation on the safeness of traffic), 5th step(suggesting the appropriate speed limit), 6th step(execution and evaluation.). The appropriate speed limit was decided on consideration of the safety of maritime traffic on the range of the maximum speed and the minimum speed. This model was used to derive the appropriate speed limit on the harbour water and Busan harbour entrance waterway. As the result, the harbour water was calculated to be 6.9 knots, the appropriate speed limit of Busan entrance harbour was 9.3 knots. The present calculation of the speed limit on the approaching channel area is 10 knots, inner harbour area is 7 knots, which are similar to the result of the speed limit. This research is the first research on selecting the speed limit model and has its limits on finding the perfect speed limit result. More detailed standards on the safeness of traffic evaluation must be found and additional study is necessary on discriminating consideration of the elements. This research has its value which it provides instances of aboard cases on guidelines of selecting the speed limit.