• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.205-211
• /
• 2011

As the increase in maritime traffic and leisure, the marine accident risk has increased in the domestic coast. In this study, the cause and the environment of domestic marine accidents from 1990 to 2009 have been investigated and analyzed by using the statistics issues of Korean Maritime Safety Tribunal. Based on the analysis of most domestic marine accidents such as engine damage, collision, capsizing of small vessels, we propose how to use mobile telecommunication terminals for preventing marine accidents and the best countermeasures.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.98-108
• /
• 2006

The vessels, already built and is operating in Korea, have the hull form of catamaran, with LOA(Length Over All) 15 m, LBP(Length Between Perpendiculars) 12 m, GT(Gross Tonnage) 9.77ton, Light Load Displacement 15.1ton. Korean Society of Ship Inspection & Technology, Chungnam National University, Inha University, Seoul National University and Advance Marine Tech co. ltd developed by cooperation it for fishing vessels. And it used FRP(Fiber Reinforced Plastics) for hull material and main engine of diesel $360ps{\times}2800rpm{\times}2sets$ with a water jet system. Based on these results, this paper describe small leisure fishing vessels with multi-hull, in relation to the project of CTYS(Regional Reserch Center for Transportation System of Yellow Sea Inha University) that aimed to development of trimaran hull form(LOA=17m, LBP=14m(Side Hull=6m), GT=9.77ton, Light Weight=11.2 ton).

• Journal of Navigation and Port Research
• /
• v.35 no.5
• /
• pp.401-406
• /
• 2011

In the near future, the marine resort development will increase because people's requirements of marine leisure are raising. Instead of marine resort development by reclamation which causes environmental disruption, it is expected that marine resort development using floating structures increases. And the requirement of floating hotel that is main facilities of marine resort grows too. It is necessary to investigate the load estimation of floating hotel. The floating hotel has two characteristics, both hotel and ship. Accordingly, this study examines the consideration points for planning the load estimation of floating hotel, and the results of load estimation of ship and hote are investigated.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.426-434
• /
• 2014

The research developed twin keel yacht for everyone which is able to stand erectly on mud flat without list and intended to commercialize the development product for popularization of west coast's marine leisure industry. Yacht's linear was utilized by "Blue Water21" has superior performance among the existing sailing yachts and twin keel model has been tested by calculation of mono keel's extent and its center of gravity. The result was that only 4 % of difference have been identified between mono keel and twin keel's hydrodynamic resistance which was smaller difference than predicted.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.385-386
• /
• 2010

The ship's seakeeping performance in the pitching and roll motion was felt tired. These gives structural loads to loaded with cargo and hull facilities. Be to improve, small catamaran power yacht designed a data for ship research and ship's hull form to be decided. In this study, based on domestic release for coastal marine environment in the interpretation criteria were chosen based on the exercise performance. The seakeeping performance of marine leisure catamaran was based on voyage speed. The seakeeping performance estimates based on the encounter angle, the wave of the encounter frequency response amplitude ratio for exercise was assessed in the high performance area.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.666-672
• /
• 2005

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MO-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of performance test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the MO-ARS.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.98-99
• /
• 2016

The aim of study is to develop a dual driven ship berthing/deberthing system with $360^{\circ}$ steerability. A large ship used bow thruster, side thruster and pod propulsor etc. when approaching to a pier. But as marine leisure boats become large-scaled, the number of accidents is recently increasing what caused a ship to crash into a ship and a ship to crash into mooring facilities during berthing/deberthing on a marina. To solve the problem, the control responsiveness of a joystick connected with two motors and a propeller was checked and torque was increased by the electromagnetic design of magnetic gear. A sea trial test was carried out to investigate a performance of the developed system in the real sea.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.239-245
• /
• 2016

In the midst of continuing international recession, the rate of maritime traffic and marine leisure markets are consistently growing. The Republic of Korea controls the marine traffic volume through vessel traffic centers and various other management facilities. Nevertheless, the continuous growth and complexity of marine traffic is resulting in repeated occurrences of marine accidents. Recovery is very difficult in cases of human injuries or deaths caused by marine accidents due to its nature, and the scale of marine accidents is also becoming greater with advanced ship building technologies. Passenger ships, oil tankers, and other such vessels used for specific purposes requires a more detailed navigational status surveillance and analysis, and numerous research has been conducted with an objective for monitoring such special purpose vessels. However, the data elements transmitted from the ocean to the shore station are limited to AIS and ARPA. We are implementing IoT ship sensor collection and a syncing system capable of transmitting various ship sensing data to the shore station, and also proposing a Safe Navigation Status Analysis System utilizing the collected data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.147-153
• /
• 2015

The International Maritime Organization has conducted SEEMP for reducing $CO_2$ emission from ships. The study was carried out by comparing the real application of three shipping companies with IMO guideline about SEEMP on the same category. This paper suggests a method to improve implementation of SEEMP more efficiently through a grasp of the problem from its real application. Improvements are error correction of Company EEOI, unification of EEOI data acquisition period, compliance of measurements for fuel-efficient operation, suggestion of $CO_2$ mass conversion factors for various fuel and EEOI goal setting through formal standards of the International Maritime Organization.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.136-142
• /
• 2011

Al alloys have been used widely for commercial and military ships in most ocean countries since mid-1950s, and the value as light metal with high mechanical strength has been proven. As the safety and fuel efficiency of Al ships have improved, she can carry more freight, sail faster and travel longer distances. Furthermore, in the shipbuilding industry, Al alloys are applied as structural materials for ships to various areas including the deck of luxurious cruises, battleships and leisure ships. In addition, Al alloys are being spotlighted as environmental-friendly material as they can be recycled even after end of lifespan. However, Al alloys for ships must be carefully selected after considering corrosion resistance, endurance, strength, and weldability in sea water environment. Al alloys to satisfy these conditions are used widely include 5000 series Al-Mg alloy and 6000 series Al-Mg-Si alloy. Thus, this study selected and evaluated the cavitation characteristics of the 5000 series Al alloys that are used in hulls that directly contact seawater and the 6000 Al alloys that are used in the upper structures of ships. Results of cavitation test with time, weightloss and cavitation rate of 5456-H116 showed the smallest damage among 5052-O, 5456-H116 and 6061-T6.