• 한국IT서비스학회지
• /
• 제7권1호
• /
• pp.219-235
• /
• 2008

In this paper, we suggest a strategy to implement RFID in the Marine Equipment Distribution Center. Although RFID technology has be applied to the various business areas, due to the immature technological market and other reasons, for the successful RFID implementations, it is necessary for the company to review RFID implementations methodology. The aims of the Marine Equipment Distribution Center is to share storages for the marine equipment enterprises and to gain the max efficiency in the logistics flow. To achieve this goal RFID can be one of the alternatives. This paper suggests major issues that can help to reach the successful implementation of RFID in the distribution center.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.255-255
• /
• 2017

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.745-751
• /
• 2021

The International Maritime Organization(IMO) has established Emission Control Areas(ECA) in the Baltic Sea, North Sea, and sea areas in the United States since 2012, and encourages the use of clean fuels such as Natural Gas(NG). To keep pace with the increase in international demand for LNG bunkering vessels, research for the localization of key equipment for LNG bunkering must also be performed in Korea. For research and development of core bunkering equipment and systems, in this study, heat transfer analysis and structural analysis were performed by modeling the saddle, which must first be secured structurally by directly receiving the load of the hose. As a result, the suitability of the model was reviewed by analyzing the temperature distribution and stress level through the analysis results of this study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.505-514
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure void fraction and channel geometry. We classify the flow pattern by measuring the output signal of the conductivity probe. under the classified flow pattern we mount a visualization equipment on the test section and take pictures. We vary the concentration of pure solvent and polymer to measure local void fraction. We know that the maximum point position of local void fraction distribution move from the center of the pipe to the wall of the pipe as JSL increase when JSA is constant in two phase flow. But we find that the maximum point position of local void friction move from the wal of the pipe to the center of the pipe when polymer concentration increase.

• 수산해양기술연구
• /
• 제56권4호
• /
• pp.384-394
• /
• 2020

This paper proposes an outlier detection model based on machine learning that can diagnose the presence or absence of major engine parts through unsupervised learning analysis of main engine big data of a ship. Engine big data of the ship was collected for more than seven months, and expert knowledge and correlation analysis were performed to select features that are closely related to the operation of the main engine. For unsupervised learning analysis, ensemble model wherein many predictive models are strategically combined to increase the model performance, is used for anomaly detection. As a result, the proposed model successfully detected the anomalous engine status from the normal status. To validate our approach, clustering analysis was conducted to find out the different patterns of anomalies the anomalous point. By examining distribution of each cluster, we could successfully find the patterns of anomalies.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.191-195
• /
• 2008

한국해양연구원에서는 2009년 6월 예정인 통신해양기상위성의 해색센서(GOCI) 데이터의 수신, 처리, 배포를 위한 해양위성센터를 구축하고 있다. 해양위성센터의 위치는 전파 수신 환경 등의 조건을 고려하여, 5곳의 후보지중 안산으로 최종 선정하였고, 기존 건물을 센터의 기능에 맞게 구조변경을 완료하였다. L-Band로 전송되는 위성 신호를 수신하기 위해 9m 그레고리안식 안테나 및 RF 장비 등 수신시스템을 구축하고 있으며, 수신된 데이터를 처리하고 관리하기 위해 네트워크장비, 대용량 저장장치, 위성자료 전처리시스템, 위성자료 처리시스템, 자료관리 시스템, 통합감시제어시스템, 기관간자료교환시스템을 구축하였다. 추후 자료배포시스템, 작업관리시스템, 위성자료 통합연구분석시스템, 외국위성 수신시스템 등을 구축 완료하여, 정지궤도 해양위성의 활용 극대화를 위한 해양위성센터 구축을 최종목표로 하고 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.435-436
• /
• 2009

In the effort on cost reduction in marine equipment company, the medium sized impeller blade ($500mm{\times}200mm{\times}20mm$) of an axial flow pan was manufactured by the high pressure die casting, with which was replaced the gravity die casting. High pressure die casting is a practical alternative because of some advantages such as excellent accuracy and smooth cast surface as well as cost reduction if a certain amount of porosity in the parts can be minimized. In order to reduce the porosity in the center of the neck which is thickest region of the impeller blade, the several gate designs were proposed in this work. The flow simulations for each gate design were performed and then the optimal design was determined by considering the air pressure distribution in neck section. Finally, the size of porosity in the neck of the die cast impeller blade for optimal design was less than 1mm, which satisfied the requirement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.