• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.185-191
• /
• 2016

Purpose: The purpose of this study were to evaluate the quality of dental prostheses printed by 3-dimensional printing system. Methods: Mater model was prepared and ten study models were fabricated. Ten single crowns were printed by 3D-printing system(Resin group) and another ten single crowns using casting method were manufactured(Metal group). The marginal adaptation of single crowns were measured using by silicone replica technique. Silicone replicas were sectioned four times. The marginal adaptations were evaluated using by digital microscope. Statistical analyses were performed with Mann-Whitney test(${\alpha}=0.05$). Results: $Mean{\pm}standard$ deviations of all marginal adaptations were $92.1(20.0){\mu}m$ for Metal group and $69.7(12.3){\mu}m$ for Resin group. Two groups were no statistically significant differences(p>0.05). Conclusion: Marginal adaptation of single crowns printed by 3D-printing system were ranged within the clinical recommendation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.539-553
• /
• 2004

This paper models and solves contracting schemes for both when quality is perfectly observable and when quality is not perfectly observable in supply chain. When quality is perfectly observable, the first-best optimal solution which is that the marginal utility of procurer obtained from the quantity and quality supplied by suppliers (the price) is equal to the marginal cost to produce the quantity and quality is obtained. However, when quality is not perfectly observable to procurers the optimal solution cannot be the first-best but the second-best where the price is greater than the marginal cost to produce the quantity and quality and social welfare is less than that of the first-best solution.

• Restorative Dentistry and Endodontics
• /
• 제29권1호
• /
• pp.66-72
• /
• 2004

All-in-one adhesives were recently developed for reducing the technique sensitivity and chair time, but lots of concerns were made on bondability, longevity, and microleakage. The object of this study was to evaluate microleakage and marginal quality of all-in-one adhesives using electrochemical method and SEM analysis quantitatively. After making Class V cavities, they were bulk filled with Heliomolar(#A1 after surface treatment with three adhesives: Adper Prompt (Group A), One up bond F (Group O), Xeno III (Group X) Electrical conductivity (microamphere, ${\mu}A$) was checked two times: before and after cavity filling. Percentage of leaky margin was estimated from SEM image (${\times}1,000$). The data were statistically analysed: ANOVA and Paired T test for electrical conductivity, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman s rho test for checking of relationships between 2 methods. The result were as follows: 1. There was no difference in microleakage between adhesive systems and every specimen showed some of microleakage after filling. 2. Microleakage was reduced about 70% with composite resin filling. 3. Marginal quality was the best in group A. decreasing among groups in the following order: group O, followed by group X. There were significant differences between group A and group X (p=0.015), and between group 0 and group X (p=0.019). 4. There was no relationship between the microleakage measured by electrochemical method and marginal quality measured by SEM analysis. Within the results of this study, there was no difference in microleakage among groups by electrical conductivity. However, significant difference in marginal quality was seen among groups. It was believed that these dissimilar results might be induced because of their own characteristics. Analysis of microleakage needs various methods for accuracy.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.760-768
• /
• 2007

Statement of problem. Conventional denture treatment for totally edentulous patients is associated with a variety of functional and psychosocial problems. The placement of implants in the anterior region of the maxilla and mandible and the fabrication of an implant-retained overdenture might solve these problems. Purpose. This study compared the marginal bone loss around the implant and evaluated the implant survival rate and complications in patients treated with overdentures retained by implants for 2 years. Material and methods. Patients who had received implant-retained overdentures using a Dolder bar at Samsung Medical Center from January 1999 to June 2005 and had participated in the annual recall programs for two years were selected for this study. A total of 18 patients and 56 $Br{\aa}ne-mark\;system^{(R)}$ implants were used, and their data were reviewed. Evaluations of the survival rate, bone quality, marginal bone loss, and complications were performed. The data on the Dolder bar length and clip length were measured. The change in marginal bone loss and the correlation between the marginal bone loss and bar length, clip length, or bone quality were investigated. Results. Implants placed in this study showed a 100% survival rate. The average annual bone loss was 1.12mm in the first year and 0.27mm in the second year in the maxilla, and 0.58mm in the first year and 0.22mm in the second year in the mandible. The marginal bone loss in the maxilla showed no significant association with those in the mandible. (P>.05). There was no significant difference in marginal bone loss around implants between the first and second year. (P>.05) There was no statistically significant relationship (P>.05) between the marginal bone loss and bone quality, clip length, or Dolder bar length. The Dolder bar length showed a high correlation with the clip length. (P<.05) Various complications were noted. Conclusion. These results confirmed the favorable outcome for patients treated with implant-retained overdentures.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.197-201
• /
• 2020

Purpose: This study aimed to assess the quality of dental prostheses printed by digital light-processing (DLP) technology. Methods: Ten experimental models were prepared. The ten specimens that were printed by DLP technology constituted the DLP group. The ten specimens that were produced in the same model by the casting method constituted the control group. The marginal gaps of the 20 specimens produced were measured. These gaps were measured by a silicon replica technique at two abutments of the specimen. Therefore, 20 marginal gaps were measured in each group. An independent sample t-test was performed to compare the marginal gaps measured in the two groups (α=0.05). Results: According to the results of the measurement, there was a significant difference between the mean marginal gap of the control group (78.8 ㎛) and that of the DLP group (91.5 ㎛), p<0.001. Conclusion: Although the mean marginal gaps of dental fixed prostheses produced by the DLP method was higher than the mean marginal gap of those produced by the casting method, it was considered to be within the clinical threshold value suggested by some previous studies.

• 경영과학
• /
• 제21권3호
• /
• pp.1-12
• /
• 2004

The paper demonstrates that versioning of digital products occurs more frequently than that of physical products because of low marginal cost. The versioning occurs no matter what a customer knows his/her reservation price. Low-quality version will not be produced when the difference between reservation prices is very large. The paper also shows that a firm tries to lower the quality of low-quality product to prevent customers with high reservation prices from purchasing low-quality product.

• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.36.1-36.17
• /
• 2022

Objectives: This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods: Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results: None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions: The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.

• 대한지리학회지
• /
• 제38권6호
• /
• pp.949-960
• /
• 2003

본 연구에서는 점 객체 (Point Object)를 이용하여 수치지도상에 아파트 단지의 위치를 표현하는 다양한 방법에 따라 GIS와 헤도닉 함수를 이용한 대기질의 한계잠재가격의 추정치가 달라지는 문제점을 검토하였다. 본 연구에서 다루어진 수치지도상에 아파트 단지의 위치를 표현방법은 아파트 단지의 중심점을 이용하는 방법, 중심점에서 수평으로 우측 100미터 떨어진 점을 이용하는 방법, 중심점에서 수평으로 우측 50미터 떨어진 점을 이용하는 방법, 중심점에서 수평으로 좌측 100 미터 떨어진 점을 이용하는 방법 등이다. 4가지 방법은 개별 아파트가 아닌 아파트 단지별로 아파트의 가격과 속성이 공개되는 현재와 같은 상황에서 아파트 단지를 대표할 수 있는 점들로 가정되었다. 4개의 방법을 통해 각기 다른 지점에 표현된 수치지도상의 아파트 위치와 GIS를 이용하여 헤도닉 함수추정에 필수적인 위치변수가 측정되었다. 그리고 측정된 위치변수, 아파트의 물리적 속성을 나타내주는 변수, 아파트 위치에서의 미세먼지 (PM10) 수준을 나타내는 변수를 포함한 4개의 헤도닉 함수가 추정되었다. 또한 추정결과를 이용하여 미세먼지의 한계잠재가격이 추정되어 그 크기가 상호 비교되었다. 추정된 4개 함수간에 존재하는 차이를 중심점을 이용했을 경우의 얻어진 한계잠재가격을 기준으로 상호비교할 경우 그 크기의 차이는 3.33%에서 11.91% 정도임이 드러났다. 이는 중심점을 이용했을 경우 얻어진 데이터에 다른 함수식이나 다른 추정방법을 적용하였을 경우에 얻어지는 한계잠재가격들 간의 차이보다 크거나 유사한 것이다. 본 연구의 시사점은 GIS와 헤도닉 함수를 이용한 대기질의 한계잠재가격의 추정시 수치지도상의 아파트단지 위치표현방법이 적지 않은 영향을 미치기 때문에 다양한 위치표현 방법을 시도하여 분석결과가 민감하게 변하는 가를 주의 깊게 분석해야 한다는 점이다.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.33-42
• /
• 1991

The purpose of this study was to evaluate the sealing properties of the temporary filling materials used in endodontic treatment Access cavities were prepared in 135 extracted human molar teeth. Then, cotton pellets were placed in the pulp chamber until the depth of 5 mm for the temporary filling materials; Caviton, zine oxide-eugenol, double sealing (A) (stopping 15 mm + zinc oxide - eugenol, 3.5mm ) double sealing (B) (stopping 3.0 mm + zinc oxide - eugenol 2.0 mm) and gutta percha stopping. After filling the materials, the teeth were immersed in 1 % methylene blue solutions for 3 days, 1 week and 2 weeks. Then thermal cycling was performed at the temperature of $60^{\circ}C$ and $4^{\circ}C$, followed by longitudinal sections on the center of tooth. Finally, staining on the cotton pellet was evaluated. The following results were obtained. 1. Stopping showed lower marginal sealing quality than Caviton, zinc oxide - eugenol and double sealing. 2. In 1 week group, Caviton showed higher marginal sealing quality than zinc oxide-eugenol, double sealing and stopping. 3. Caviton and double sealing (B) showed a great decrease in marginal sealing quality with the increse of time. 4. Caviton had high marginal sealing quality in 3 day group and 1 week group, but in 2 week group, Caviton showed a great decrease. 5. Double sealing (B) showed fairly high marginal sealing quality in 3 day group, but decreased greatly after 1 week on.

• 품질경영학회지
• /
• 제15권2호
• /
• pp.20-26
• /
• 1987

An algorithm for the minimum total process percent defective under marginal costs is presented. Initial process is single series system, which is constructed by k process units, and each process is considered priority. Minimum of total process percent defective for parallel-series system exists when additional process setup costs are larger than marginal costs.