• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1316-1332
• /
• 2012

Formation flying is an important technology that enables high cost-effective organization of outer space aircrafts. The ad-hoc wireless network based on direct-sequence ultra-wideband (DS-UWB) techniques is seen as an effective means of establishing wireless communication links between aircrafts. In this paper, based on the theory of matched filter and error bits correction, a hybrid detection algorithm is proposed for realizing multiuser detection (MUD) when the DS-UWB technique is used in the ad-hoc wireless network. The matched filter is used to generate a candidate code set which may contain several error bits. The error bits are then recognized and corrected by an novel error-bit corrector, which consists of two steps: code mapping and clustering. In the former step, based on the modified optimum MUD decision function, a novel mapping function is presented that maps the output candidate codes into a feature space for differentiating the right and wrong codes. In the latter step, the codes are clustered into the right and wrong sets by using the K-means clustering approach. Additionally, in order to prevent some right codes being wrongly classified, a sign judgment method is proposed that reduces the bit error rate (BER) of the system. Compared with the traditional detection approaches, e.g., matched filter, minimum mean square error (MMSE) and decorrelation receiver (DEC), the proposed algorithm can considerably improve the BER performance of the system because of its high probability of recognizing wrong codes. Simulation results show that the proposed algorithm can almost achieve the BER performance of the optimum MUD (OMD). Furthermore, compared with OMD, the proposed algorithm has lower computational complexity, and its BER performance is less sensitive to the number of users.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1455-1464
• /
• 1994

A new and efficient algorithm for the integration of the thermal-elasto-plastic constitutive equation is proposed. While it falls into the category of the return mapping method, the algorithm adopts the three point approximation of plastic corrector within one time increment step. The results of its application to a von Mises-type thermal-elasto-plastic model with combined hardening and temperature-dependent material properties show that the accurate iso-error maps are obtained for both angular and radial errors. The accuracy achieved is because the predicted stress increment in a single step calculation follows the exact value closely not only at the end of the step but also through the whole path. Also, the comparison of the computational time for the new and other algorithms shows that the new one is very efficient.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.78-84
• /
• 2022

In this paper, to improve further the bit-error rate (BER) performance of the stronger channel user in non-uniform source non-orthogonal multiple access (NOMA) with symmetric superposition coding (SSC), we propose a smart bit-to-symbol (BTS) mapping of SSC. First, the analytical expression for the total allocated power of the proposed BTS mapping scheme is derived, and then we show that the BER of the proposed BTS mapping scheme improves further, compared to that of the existing BTS mapping scheme. Moreover, based on the simulations, the signal-to-noise (SNR) gain of the proposed BTS mapping scheme over the existing BTS mapping scheme is calculated. In result, the proposed BTS mapping could be a candidate scheme for non-uniform source SSC NOMA with the SNR gain.

• 전자공학회논문지S
• /
• 제35S권6호
• /
• pp.137-146
• /
• 1998

최근에 영상 처리 시스템에서 칼라 데이타의 사용이 급격히 증가하고 있다. 그러나 색 재현 능력의 차이가 있고 각 장치마다 고유의 색좌표계를 사용하므로 서로 다른 장치사이에서 색 재현시에는 좌표계 변환이 요구된다. 특히 색재현 범위가 좁은 프린터에서 자연색을 출력하기 위해서는 색역 사상과 주어진 색역 계조의 범위를 확장할 수 있는 디더링 과정이 필요하다. 본 논문에서는 색역 사상을 위하여 각 장비의 출력 특성을 고려한 비선형 사상 함수를 획득하여 이를 기반으로 하여 장비들간의 색역 일치를 이루었다. 디더링 과정에서는 채색시 발생하는 중복 면적의 특성을 고려하여 양자화 단계를 확장하는 비선형 순서 디더링과 오차 확산 방법에서 발생하는 경계 부분의 문드러짐과 인접색의 변형을 줄일 수 있는 변형된 오차 확산 방법을 제안한다.

• 전기학회논문지
• /
• 제68권3호
• /
• pp.471-479
• /
• 2019

This research proposes a indoor magnetic map matching algorithm that improves the position accuracy by employing multiple magnetic sensors and probabilistic candidate weighting function. Since the magnetic field is easily distorted by the surrounding environment, the distorted magnetic field can be used for position mapping, and multiple sensor configuration is useful to improve mapping accuracy. Nevertheless, the position error is likely to increase because the external magnetic disturbances have repeated pattern in indoor environment and several points have similar magnetic field distortion characteristics. Those errors cause large position error, which reduces the accuracy of the position detection. In order to solve this problem, we propose a method to reduce the error using multiple sensors and likelihood boundaries that uses human walking characteristics. Also, to reduce the maximum position error, we propose an algorithm that weights according to their importance. We performed indoor walking tests to evaluate the performance of the algorithm and analyzed the position detection error rate and maximum distance error. From the results we can confirm that the accuracy of position detection is greatly improved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.121-121
• /
• 2014

본 연구에서는 반도체 제조의 Diffusion 공정설비의 FFU (Fan Filter Unit) 진동에 의해 발생한 wafer 불량 현상을 규명 및 개선하였다. EFEM(Equipment Front End Module)의 Loading 부에 장착된 FOUP(Front Opening Unified Pod)에 들어 있는 Wafer 들이 설비 EFEM 하부로 떨어져 깨지거나 FOUP 내에서 겹침 현상이 발생하는 것을 확인하였다. 이에 생산현장의 모든 Diffusion 공정 설비를 조사하였으며, 그 결과 A 사(社)의 특정 설비에서만 발생되는 현상임을 확인하였다. 해당 A사(社)설비군에서만 월 평균 10 건의 Slot Mapping Error 가 발생하였으며, 이로 인해 Wafer가 재 제조된 매수가 월 평균 53 매로 확인되었다. 따라서 본 연구는 A 사(社)설비에서 발생하는 Mapping Error 의 원인 규명 및 개선을 위해 추진되었다. 총 12 개의 항목을 불량 발생 원인 후보 군으로 선정 후 예비 진단한 결과 FFU(Fan Filter Unit)에 의한 문제 발생 가능성이 가장 높을 것으로 추정되었다. 이에 따라 4 개의 서로 다른 물리적 환경/조건에서 진동을 측정하였으며, 최종 평가 결과 Motor 와 Blade 의 불균형에서 기인한 진동이 설비의 loader 부에 직접적으로 영향을 주는 것을 확인하였다. 진동 문제를 해결하기 위해 고 RPM blade 에서 저 RPM 및 유량 감소를 보완할 수 있는 신규모델로 교체하였다. 신규 Module(blade/motor) 장착 후 Load port 에서의 진동 측정 결과 개선 전 대비 91% 감소하였으며, 결과적으로 Slot mapping error 발생 건수가 50% 이상 감소되는 효과와 Wafer 재 제조 매수도 월 평균 약 43% 감소하는 효과를 얻을 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.98-109
• /
• 2010

This paper deals with a new method of unmanned aerial vehicle (UAV) recovery when a UAV fails to get a global positioning system (GPS) signal at an unprepared site. The proposed method is based on the simultaneous localization and mapping (SLAM) algorithm. It is a process by which a vehicle can build a map of an unknown environment and simultaneously use this map to determine its position. Extensive research on SLAM algorithms proves that the error in the map reaches a lower limit, which is a function of the error that existed when the first observation was made. For this reason, the proposed method can help an inertial navigation system to prevent its error of divergence with regard to the vehicle position. In other words, it is possible that a UAV can navigate with reasonable positional accuracy in an unknown environment without the aid of GPS. This is the main idea of the present paper. Especially, this paper focuses on path planning that maximizes the discussed ability of a SLAM algorithm. In this work, a SLAM algorithm based on extended Kalman filter is used. For simplicity's sake, a blimp-type of UAV model is discussed and three-dimensional pointed-shape landmarks are considered. Finally, the proposed method is evaluated by a number of simulations.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.183-186
• /
• 2011

In this work, we consider imperfectness of feedback channels in the adaptive transmission scheme which was previously studied with an assumption of error-free feedback channels. New method of mapping the modulation index into the feedback channel symbols and quantifying feedback error over fading channels are proposed. The presented method and results are expected to offer valuable tools for the system designer to efficiently implement adaptive diversity schemes to compensate for the performance degradation due to feedback error.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.86-93
• /
• 2002

A new error estimation method is proposed. This utilizes the variation of energy functional about the mapping function between the global and the master elements. The resultant system of equations is the weak form of the generalized conservation checks. However, This formulation has an important information about the relations between the connected elements. In other words, some relations between the connected elements are obtained and these can be used very usefully to measure it posteriori error. In this paper, the explicit formulations are presented for the 1-dimensional model and the 2-dimensional model problems. Numerical results are provided for first order shear deformation theody of beam model and the plane stress problem.

• 한국지리정보학회지
• /
• 제7권1호
• /
• pp.52-61
• /
• 2004

한국수자원공사에서는 홍수지도 제작을 위한 정밀 지형자료 구축을 위해 LiDAR 측량을 실시하고 있으며, 향후 전국에 대한 홍수지도 제작시 막대한 비용이 소요될 것으로 예상된다. 따라서 홍수지도 제작이 꼭 필요한 지역을 선정하기 위한 사전모의용 자료구축을 위해 NGIS 수치지형도를 활용하는 것이 바람직하며, 이를 위해서는 각 축척별 수치지형도의 표고오차 분석이 필요하다. 본 연구에서는 수치지형도의 DEM 오차를 평가하기 위해 LiDAR 측량을 수행하여 구축한 DEM과 비교하였다. 특히 수치지형도로부터 구축한 TIN으로부터 DEM을 생성하기 위해 수행하는 보간법의 종류에 따라 발생하는 오차특성을 분석하였다. 분석결과 1:1,000 수치지형도가 1:5,000 수치지형도에 비해 오차가 작게 나타났으며, linear 보간을 수행한 DEM이 quintic 보간을 수행한 DEM에 비해 작은 오차특성을 보였다. 특히 도시지역의 경우 완만한 경사로 구성되어 있기 때문에 해상도에 따른 DEM 오차의 변화는 매우 작은 것으로 평가되었다.