• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.342-351
• /
• 1999

The forest vegetation developing on Mt. Inwang, an isolated forestland in Seoul, Korea was analyzed phytosociologically and its spatial distribution mapped out. Using the vegetation map, The characteristics of landscape structures in terms of the number and size of patches are discussed. Forest vegetation of the study area was classified into ten communities, ten groups, and eighty subgroups. Landscape element types were classified into secondary forests, relict communities, introduced plantations, and other elements including urbanized area. Pinus densiflora community, natural forest and Robinia pseudo-acacia community, plantation, formed matrix and some secondary forest elements, relict communities and the ether plantations of small size tended to distribute as small patches in such matrix. The number of patches per unit area in secondary forest elements was more than that in plantation elements. The result in patch size was vice versa. The vascular plant species richness of the landscape element types in Mt. Inwang was found to he positively related to their size. As the results of landscape ecological analyses, it was estimated that differentiation of patches recognized in community level would be related to human interference a and those in subordinate levels to natural process such as progression of succession.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.1-9
• /
• 2004

In this paper, we proposed a hardware(H/W) structure which can compress and recontruct the input image in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into a H/W with the efficient structure for FPGA. We used the DWT(discrete wavelet transform) which transforms the data from spatial domain to the frequency domain, because use considered the motion JPEG2000 as the application. The implemented H/W is separated to both the data path part and the control part. The data path part consisted of the image processing blocks and the data processing blocks. The image processing blocks consisted of the DWT Kernel for the filtering by DWT, Quantizer/Huffman Encoder, Inverse Adder/Buffer for adding the low frequency coefficient to the high frequency one in the inverse DWT operation, and Huffman Decoder. Also there existed the interface blocks for communicating with the external application environments and the timing blocks for buffering between the internal blocks. The global operations of the designed H/W are the image compression and the reconstruction, and it is operated by the unit or a field synchronized with the A/D converter. The implemented H/W used the 54％(12943) LAB(Logic Array Block) and 9％(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70MHz clock frequency. So we verified the real time operation. that is. processing 60 fields/sec(30 frames/sec).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.844-847
• /
• 2005

A seamless analysis of complex geometry is one of greatly interesting topic. However, there are still gaps between the industrial applications and fundamental academic studies owing to time consuming modeling process. To resolve this problem, an auto mesh generation program based on grid-based approach has been developed for IT-product in the present study. At first, base mesh and skin mesh are generated using the information of entities which extracted from IGES file. Secondly the provisional core mesh with rugged boundary geometry is constructed by superimposing the skin mesh as well as the base mesh generated from the CAD model. Finally, the positions of boundary nodes are adjusted to make a qualified mesh by adapting node modification and smoothing techniques. Also, for the sake of verification of mesh quality, the hexahedral auto mesh constructed by the program is compared with the corresponding tetrahedral free mesh and hexahedral mapped mesh through static finite element analyses. Thereby, it is anticipated that the grid-based approach can be used as a promising pre-processor for integrity evaluation of various IT-products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.751-762
• /
• 2000

In the forthcoming next generation highspeed networks, the provisioning of broadband mobile multimedia services is the most important issue while an efficient network management architecture, which can manage the network resources efficiently, is essential. The next generation highspeed networks will be composed of the ATMand SDH-based transport network systems and the H-based interworking systems. The management functions of these network systems are implemented various technologies, such as TMN and SNMP. In order to integrate these network resources efficiently with heterogeneous management functions, the distributed network management architecture such as TINA is most appropriate. In this pape, we propose an interworking architecture for TINA manager and TMN agent. where the TINA-based EML subnetwork management operations mapped into the related management operations of the TMN NE agent. The proposed interworking architecture is simpler than JIDM, and the processing overhead is minimized.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.311-318
• /
• 2020

A virtual power plant is a kind of software power plant that enables participation in power operation by integrally managing individual distributed resources. This paper proposes a common information communication architecture based on the TASE.2 standard and the OpenADR2.0 standard to operate a virtual power plant as a single power system. ESS is designed TASE.2 SBO devices that related objects are mapped to OpenADR2.0 services and composed as a single sequence type. Through simulation verification, it conforms data exchange and operation based on both standards.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2009

In this paper, to elucidate the further mechanisms of N-methyl-N'-nitro-N-nitrosoguanidine (MNNG)-induced growth arrest, we investigated the effect of MNNG on cell cycle and proliferation in U937 cells, a p53-null human myeloid leukemia cell line. It was found that MNNG causes an arrest at the G2/M phase of the cell cycle and induces apoptosis, which is closely correlated to inhibition of cyclin B1 and cyelin-dependent kinase (Cdk) 2-associated kinase activities. MNNG treatment in. creased protein and mRNA levels of the Cdk inhibitor p21(WAF1/CIP1), and activated the reporter construct of a p21 promoter. By using p21 promoter deletion constructs, the MNNG-responsive element was mapped to a region between 113 and 61 relative to the transcription start site. These data indicate that in U937 cells MNNG can circumvent the loss of wild-type p53 function and induce critical downstream regulatory events leading to transcriptional activation of p21. Present results indicate that the p53-independent up-regulation of p21 by MNNG is likely responsible for the inhibition of cyclin/Cdk complex kinase activity rather than the down-regulation of cyclins and Cdks expression. These novel phenomena have not been previously described and provide important new insights into the possible biological effects of MNNG.

• Composites Research
• /
• v.35 no.5
• /
• pp.317-321
• /
• 2022

In this study, the PIC design method with machine learning that automatically assigning different stacking sequences according to loading types was applied bumper beam. The input value and labels of the training data for applying machine learning were defined as coordinates and loading types of reference elements that are part of the total elements, respectively. In order to compare the 2D and 3D implementation method, which are methods of representing coordinate value, training data were generated, and machine learning models were trained with each method. The 2D implementation method is divided FE model into each face and generating learning data and training machine learning models accordingly. The 3D implementation method is training one machine learning model by generating training data from the entire finite element model. The hyperparameter were tuned to optimal values through the Bayesian algorithm, and the k-NN classification method showed the highest prediction rate and AUC-ROC among the tuned models. The 3D implementation method revealed higher performance than the 2D implementation method. The loading type data predicted through the machine learning model were mapped to the finite element model and comparatively verified through FE analysis. It was found that 3D implementation PIC bumper beam was superior to 2D implementation and uni-stacking sequence composite bumper.

• Composites Research
• /
• v.36 no.1
• /
• pp.53-58
• /
• 2023

The PIC design method is assigning different stacking sequences for each shell element through the preliminary FE analysis. In previous study, machine learning was applied to the PIC design method in order to assign the region efficiently, and the training data is labeled by dividing each region into tension, compression, and shear through the preliminary FE analysis results value. However, since buckling is not considered, when buckling occurs, it can't be divided into appropriate loading type. In the present study, it was proposed PIC-NTL (PIC design using novel technique for analyzing load type) which is method for applying a novel technique for analyzing load type considering buckling to the conventional PIC design. The stress triaxiality for each ply were analyzed for buckling analysis, and the representative loading type was designated through the determined loading type within decision area divided into two regions of the same size in the thickness direction of the elements. The input value of the training data and label consisted in coordination of element and representative loading type of each decision area, respectively. A machine learning model was trained through the training data, and the hyperparameters that affect the performance of the machine learning model were tuned to optimal values through Bayesian algorithm. Among the tuned machine learning models, the SVM model showed the highest performance. Most effective stacking sequence were mapped into PIC tube based on trained SVM model. FE analysis results show the design method proposed in this study has superior external loading resistance and energy absorption compared to previous study.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.401-408
• /
• 2023

The purpose of this study is to design textbook metadata as a basic task for building a textbook database. To this end, reading textbooks were defined as a category of textbooks, and a metadata development methodology was established through previous research. In order to ensure that bibliographically essential elements are not omitted, the catalog description elements of institutions that collect, accumulate, and service textbooks such as the National Library of Korea were investigated. The elements of Dublin Core, MODS, and KEM were mapped to derive elements suitable for describing textbooks. Finally, a set of textbook metadata elements consisting of 14 elements in three categories - bibliography, context, and textbook characteristics were presented by adding publication type, genre, and curriculum period elements. The 14 elements are titles, authors, publications, formats, identification sign, languages, locations, subject names, annotation, genres, table of contents, subjects, curriculum period, and curriculum information. In this study, we contributed to this field by discussing how to organize textbook resources with national knowledge resources, and in future studies, we proposed to evaluate usability by applying metadata elements to actual textbooks and revise and supplement them according to the evaluation results.