• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.242-251
• /
• 1989

The salted-dried mullet(Mugil japonicus) roe is a kind of traditional food particulary in the area of Young-am gun, Chunnam province. This study was conducted to conform the scientific processing conditions and to evaluate the nutritional quality and changes of major components during storage times. The manufacturing method was that the fresh roe was salted for about 20 hours for the preparation of salted-dried roe, washed by clean waters, drained, shaped a flat piece with 1.2cm thickness by pressing, and spreaded sesame oils on the surface of the salted roe periodically during wind drying for 20 days. The dried roe was blanched in heated water$(80^{\circ}C/3min)$ and packaged the dried product for storages. The fractional compositions of free lipid of wind dried roe were 40% of neutral lipids, 12% of glycolipids and 9% of phospholipids and those of bound lipids were 13% of neutral lipids. 10% of glycolipids and 13% of phospholipids respectively. The major fatty acids of the roe were $C_{16:0}$, $C_{18:0}$, $C_{18:1}$, $C_{18:2}$ and $C_{20:0}$ which was consisted of free and bound lipids in wind drying method during processing and storages. Total amino acids were 99.87g/100g and major amino acids were Glu, Pro, Leu, Lys and CySH and the protein score was average 155% and the chemical score was average 109%. Free amino acids was 1,376mg% that had 50.61% of Pro and the major kinds of those were Tyr and CySH.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.2
• /
• pp.193-211
• /
• 1999

This study was carried out to investigate the management and support system affecting to the occupational health nursing services(OHNS) provided in group occupational health agencies(GOHA). Questionnaire was developed and distributed to 82 nurses who were working in GOHA and who agreed to participate in the survey. The results were as follow: 1. OH nurses responded were mostly in the age of twenty to thirties(89%), married(73.7%), technical college graduates(88.9%), worked in hospital(85.4%) and participated more than 1 year in group occupational health services (96.3%). 2. Fifty eight point four percent of the OH nurses worked in number of workplace more than 30 to less than 60 in the OHNS form. The figure of workplaces undertaken by nurses was ranged greatly from 9 to more than 100. Number of employees who cared by nurses were mostly under 5,000 peoples in 93.3%. The types of industry was mostly manufacturing and located in the order of factory complex area, suburban, urban and others. 3. Most OH nurses(87.8%) were fully involved in the OHNS for the SSE. Their working days to visit SSE was 5 days per week(77.8%) and one day in the GOHA at 41.3%. 4. The OH documents using by nurses were found in more than 23 different types. However, they were largely summarized in the types of 'Workplace Health Management Card', 'Personal Health Counselling Card', 'Daily Health Management Report', 'Visiting List of Workplace' and 'Sick Employee List'. 5. The items of laboratory test provided by GOHA were mostly achieved in the purpose of basic health examination. They were used to be the blood pressure check(98.8%), blood sugar test (98.8%), urine sugar and protein(91.4%), SGOT and SGPT(85.3% each), cholesterol (82.9%), hepa vaccine immunization(82.9%), r-GPT(81.7%), hemoglobin(79.3%) and triglyceride(75.5%). 6. The OH nurses(92.7%) followed the work pattern to visit the GOHA before and after small-scale enterprises(SSE) visit by car driven by nurses in 74.3%. They were payed by GOHA for transportation fees in certain amounts. However, nurse is the main person(75.0%) who covers up in case of traffic accident. If the GOHA has no transportation regulation for the formal workplace visit, data showed that nurses had been responsible to take charge(31.7%). 7. The personnel manager who takes in charge for nursing services was 'nurse' in 61.7% and 41.2% worked as the final decision maker related to nursing work. The OH nurses' opinions about factors affecting to the management were classified in the four areas such as 'Nature(Quality) of health professional'. 'Content of OHNS', 'Delivery system of the GOHS', and 'Others'. The factors were indicated highly in 'Authority as health professional', 'Level of perception of director on the OH' and 'Physical work condition for OHNS'. The things that this study suggests in the recommendation would be summarized in such as the management and supporting system working for SSE in the OHNS is necessary to reform thoroughly. The reconsidered aspects might be in the matters of number of workplaces undertaken by nurses, development of effectively practical health documents, preparation for guideline of the laboratory test in the workpleces, establishment of convenient and encouraging support system and cooperation between other health professionals with respect and skill.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1347-1353
• /
• 2018

The fermentation of non-digestible soy meal can convert polysaccharides into many compounds that have a wide variety of biological functions. Bacillus strains are capable of hydrolyzing non-digestible saccharides, such as melibiose, raffinose, and stachyose, found in soy meal components. A highly active ${\alpha}$-galactosidase (${\alpha}$-d-galactoside galactohydrolase, EC 3.2.1.22) was isolated from a bacterium in a traditional Korean fermented medicinal herb preparation. The isolate, T2-16, was identified as Bacillus coagulans based on its 16S rRNA sequence and biochemical properties, and the strain was named Bacillus coagulans NRR-1207. When incubated in 10%(w/v) skim milk, Bacillus coagulans NRR1207 caused a decrease in the pH of the culture medium, as well as an increase in titratable acidity and viable cell counts. This strain also showed higher activities of ${\alpha}$-galactosidase, ${\beta}$-galactosidase, ${\alpha}$-glucosidase, naphthol-AS-BO-phosphohydrolase, and acid phosphatase when compared to other enzymes. It hydrolyzed oligomeric substrates, such as raffinose and stachyose, and liberated galactose, indicating that the Bacillus coagulans NRR1207 ${\alpha}$-galactosidase hydrolyzed the ${\alpha}$-1,6 glycoside linkage. These results suggest that the decreased stachyose and raffinose contents observed in fermented soy meal are due to this ${\alpha}$-galactosidase activity. Bacillus coagulans NRR1207 therefore has potential probiotic activity and could be utilized in feed manufacturing, as well as for hydrolyzing non-digestible soy meal components.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2017

Fish skin peptide-loaded liposomes were prepared in 100 mL and 1 L solution as lab scales, and 10 L solution as a prototype scale. The particle size and zeta potential were measured to determine the optimal conditions for the production of fish skin peptide-loaded liposome. The liposome was manufactured by the following conditions: (1) primary homogenization at 4,000 rpm, 8,000 rpm, and 12,000 rpm for 3 minutes; (2) secondary homogenization at 40 watt (W), 60 W, and 80 W for 3 minutes. From this experimental design, the optimal conditions of homogenization were selected as 4,000 rpm and 60 W. For the next step, fish peptides were prepared as the concentrations of 3, 6, and 12% at the optimum manufacturing conditions of liposome and stored at $4^{\circ}C$. Particle size, polydispersion index (pdI), and zeta potential of peptide-loaded liposome were measured for its stability. Particle size increased significantly as manufacture scale and peptide concentration increased, and decreased over storage time. The zeta potential results increased as storage time increased at 10 L scale. In addition, 12% peptide showed the formation of a sediment layer after 3 weeks, and 6% peptide was considered to be the most suitable for industrial application.

• Journal of agriculture & life science
• /
• v.51 no.5
• /
• pp.91-101
• /
• 2017

The in vitro experiment was conducted to ensure the supplemental level of spent Flammulina velutipes mushroom substrates(SMS) as an energy source in manufacturing of rye silage. Rye harvested at heading stage was ensiled with spent mushroom substrates of 0%(Control), 20%(R-20), 40%(R-40) and 60%(R-60) as fresh matter basis for 6week. The rumen fluid for preparation of in vitro solution was collected from two cannulated Holstein bulls fed a 40:60 concentrate:timothy diet. The experiment was conducted by 3, 6, 9, 12, 24, and 48 hrs of ncubation time with 3 replications. The silages were evaluated fermentation characteristics and dry matter digestibility(DMD) in vitro. The pH of in vitro solution was inclined to decrease with elapsing the incubation time, and that of the R-60 was significantly(p<0.05) lower than the other treatment at 48 hr of incubation. The microbial growth in vitro was inclined to increase with elapsing the incubation time, and that of the R-20 was significantly(p<0.05) greater than the Control at 48 hr of incubation. Gas production was greater(p<0.05) in the Control than the other treatments at 48 hr of incubation. In vitro dry matter digestibility(IVDMD) was higher with increasing the supplemental level of SMS, and was significantly(p<0.05) lower in the Control compared with other treatments throughout whole incubation time. The IVDMD for R-60 was the highest(p<0.05) among treatments at 24 hr and 48 hr of incubation. Considering of above results and the availability of SMS, SMS could be supplemented by 60% in fresh matter basis for rye silage fermentation.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.169-196
• /
• 2017

The fourth industrial revolution represents a revolutionary change in the business environment and its ecosystem, which is a fusion of Information Technology (IT) and other industries. In line with these recent changes, the Ministry of Employment and Labor of South Korea announced 'the Fourth Industrial Revolution Leader Training Program,' which includes five key support areas such as (1) smart manufacturing, (2) Internet of Things (IoT), (3) big data including Artificial Intelligence (AI), (4) information security, and (5) bio innovation. Based on this program, we can get a glimpse of the South Korean government's efforts and willingness to emit leading human resource with advanced IT knowledge in various fusion technology-related and newly emerging industries. On the other hand, in order to nurture excellent IT manpower in preparation for the fourth industrial revolution, the role of educational institutions capable of providing high quality IT education services is most of importance. However, these days, most IT educational institutions have had difficulties in providing customized IT education services that meet the needs of consumers (i.e., learners), without breaking away from the traditional framework of providing supplier-oriented education services. From previous studies, it has been found that the provision of customized education services centered on learners leads to high satisfaction of learners, and that higher satisfaction increases not only task performance and the possibility of business application but also learners' recommendation intention. However, since research has not yet been conducted in a comprehensive way that consider both antecedent and consequent factors of the learner's satisfaction, more empirical research on this is highly desirable. With the advent of the fourth industrial revolution, a rising interest in various convergence technologies utilizing information technology (IT) has brought with the growing realization of the important role played by IT-related education services. However, research on the role of IT education service quality in the context of IT education is relatively scarce in spite of the fact that research on general education service quality and satisfaction has been actively conducted in various contexts. In this study, therefore, the five dimensions of IT education service quality (i.e., tangibles, reliability, responsiveness, assurance, and empathy) are derived from the context of IT education, based on the SERVPERF model and related previous studies. In addition, the effects of these detailed IT education service quality factors on learners' educational satisfaction and their work application/recommendation intentions are examined. Furthermore, the moderating roles of learner position (i.e., practitioner group vs. manager group) and participation motivation (i.e., voluntary participation vs. involuntary participation) in relationships between IT education service quality factors and learners' educational satisfaction, work application intention, and recommendation intention are also investigated. In an analysis using the structural equation model (SEM) technique based on a questionnaire given to 203 participants of IT education programs in an 'M' IT educational institution in Seoul, South Korea, tangibles, reliability, and assurance were found to have a significant effect on educational satisfaction. This educational satisfaction was found to have a significant effect on both work application intention and recommendation intention. Moreover, it was discovered that learner position and participation motivation have a partial moderating impact on the relationship between IT education service quality factors and educational satisfaction. This study holds academic implications in that it is one of the first studies to apply the SERVPERF model (rather than the SERVQUAL model, which has been widely adopted by prior studies) is to demonstrate the influence of IT education service quality on learners' educational satisfaction, work application intention, and recommendation intention in an IT education environment. The results of this study are expected to provide practical guidance for IT education service providers who wish to enhance learners' educational satisfaction and service management efficiency.

• Applied Biological Chemistry
• /
• v.18 no.1
• /
• pp.1-9
• /
• 1975

In order to study on the preparation of improved soysauce, Koji(soybean and wheat mash fermented by the strain Aspergillus sojae), Koji-Natto(mixed with the various proportion of Koji to Natto; 8 : 2, 6 : 4, 4 : 6, 2 : 8) and Natto (prepared using the strain: Bacillus subtilis) were prepared as soysauce materials. Sensory evaluation for the soysauces made from above-mentioned soysauce materials and the contents of total nitrogen, amino nitrogen, ammonia nitrogen, reducing sugar, total acid and enzyme activity were determined. The results were summarized as follows: 1. Protease activity of Natto was over twice higher than that of Koji and amylase activity of Koji was three times higher than that of Natto. Koji-Natto showed successive increase of amylase activity and successive decrease of protease activity as Koji proportion was increased to Natto. 2. The contents of total nitrogen and amino nitrogen in all the soysauce mashes displayed linear increases or no changes of these contents as aging. The contents of total nitrogen and amino nitrogen in the mahes were higher as Natto proportion increase to Koji during the aging period. 3. In Natto soysauce mash and Koji-Natto soysauce mashes the contents of ammonia nitrogen were gradually increased until $1{\sim}2$ months and rapidly reduced after that period, while Koji soysauce mashes were continuatively increased. 4. In all the soysauce mash the reducing sugar increased preeminently until the two months and after then there was a rapid decrease as aging the contents of reducing sugar in the mash were higher as Natto proportion increased to Koji during aging period. 5. The total acid of Koji and Koji-Natto (8 : 2) soysauce mash showed gradual increase as aging, while contents of total acid in Natto and other Koji-Natto soysauce mashes increased preeminently until 50${\sim}$70 days aging, after then decreased. 6. The results of sensory evaluation for three-month-fermented soysauces showed the most excellent in Koji-Natto (6 : 4) and successive order in the soysauces consisting of Koji and Natto proportion: 8 : 2, 10 : 0, 4 : 6, 2 : 8, 0 : 10.