• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.609-619
• /
• 2017

제조성숙도평가(Manufacturing Readiness Assessment, MRA)는 제조 준비상태를 평가하는 방법으로 체계, 부체계의 개발 및 양산에서 발생할 수 있는 일정지연, 비용 상승, 품질 저하 등을 방지하지 위해서 2012년에 제도화되었다. 제조성숙도 평가는 군수품의 양산단계의 제조상 위험성을 사전에 식별하여 관리한 결과, 군수품의 품질수준이 개선되는 등 긍정적인 효과가 있었으나 실제 수행 시 피평가자가 평가항목에 대해 맞춤형으로 준비를 하면서 평가점수가 점차적으로 높아지는 등 준비상태 점검이라는 본래의 목적과는 달리 점수만 상승하는 평가점수 인플레 현상이 심화되는 문제점이 식별되었다. 본 연구에서는 이러한 문제점을 극복하고 과거 업체의 MRA 평가항목 이력을 반영하기 위해 HOM8, 평가항목 난이도를 반영하기 위한 DOM8, 평가항목의 중요도 및 사업별 특성을 고려한 ICOM8과 M8RA를 각각 정의하여 네가지 지표 가중치를 적용한 MWV(Manufacturing Readiness Level 8 Weighted Value)을 정의한 정량적인 MRA 평가모델을 제안한다. 제안된 모델을 통해 기존에 실시된 4개 사업에 대한 평가항목 간 MWV를 계산하였으며, 이를 통해 제안된 MRL 8 평가 방법론의 개선결과를 분석하였다.

• 품질경영학회지
• /
• 제42권1호
• /
• pp.111-127
• /
• 2014

Purpose: Simple part or equipment is necessary TRA(Technology Readiness Assessment) or MRA(Manufacturing Readiness Assessment). But sole maturity like TRA, MRA has limit complex systems or SoS(System of System). Especially complex weapon system need from the System Maturity Point of view. This research shows necessity of SRA(System Readiness Assessment). Methods: In case of complex systems, it is essential to SRA(System Readiness Assessment). For the purpose of calculating SRL(System Readiness Level), TRL and IRL must be calculated. And then SRL can obtain know from equation of TRL and IRL. To prove SRA effectiveness, it is calculated SRL of JTDLS(Joint Tactical DataLink System) programs. Results: SRA procedure is proposed and case study shows as examples of JTDLS programs. Although result of TRA is TRL6, result of SRA is not 0.6. From this research, we can know necessity of SRA. Especially complex systems or SoS(System of System) is essential to SRA. Conclusion: SRA(System Readiness Assessment) is required to overcome limitation of sole maturity and to achieve a successful acquisition of high quality weapon system. This research intended to suggest SRA procedure and case study in complex defense system.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.245-258
• /
• 2012

Purpose: Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat boots defects and 40mm ammunition explosion accident. To address these problems, the one and only government defense quality assurance agency, DTaQ(Defense Agency for Technology & Quality) tried to improve many quality assurance procedures and introduced new systems such as MRA(Manufacturing Readiness Assessment), TRA(Technology Readiness Assessment), and etc. However, as the amount of war supplies increasing every year, the resource(budget and manpower) for quality assurance is limited. Therefore, DTaQ had difficulty to handle the issue efficiently and effectively, and we propose the method to address this problem. Methods: The most popular quality assurance technique is a sampling method, in this research, we first review the many sampling techniques and compare the strength and weakness of each method. After then, we selected the most appropriate sampling techniques and applied the procedures in combat force support material and ammunition areas. Results: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Conclusion: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Lastly, since the new sampling method requires many numerical calculations, we developed a simple android OS smart-phone application which can be used easily in field.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.349-364
• /
• 2017

Purpose: The purpose of this study is to analyze quality control strengthening pilot project in development stages of weapon systems which ensures zero-defect. In order to achieve that, we propose collaboration support system between related organizations. Methods: First, we analyze how quality control methods has been developed from reviewing the preliminary study in commercial and defense industry. Then, we suggest improvement plans for quality control in defense industry and propose a pilot study which able to improve the recognized problems. Results: The results of this study ensures the participants in defense industry recognize the importance of quality control and form a consensus by sharing a case study. Finally, we propose the standardized work process by utilizing manual and manpower dispatching. Conclusion: As a result, this study clarifies the scope and role of relevant organizations to achieve the defense quality assurance in the total life cycle(TLC). Also, this paper guides the collaboration system between the relevant organization which differs from the commercial industry currently divided into development-production-quality.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.327-340
• /
• 2015

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.