• Radiation Oncology Journal
• /
• v.15 no.2
• /
• pp.153-158
• /
• 1997

Purpose : The Dual-Energy Quantitative Computed Tomography(DEQCT) was compared with bone equivalent $K_2HPO_4$ standard solution and ash weight of animal cadaveric trabecular bone in the measurement of bone mineral contents(BMC). Method and Materials : The attenuation coefficient of tissues highly depends on the radiation energy density and effective atomic number of composition, The bone mineral content of DEQCT in this experiments was determined from empirical constants and mass attenuation coefficients of bone,fat and soft tissue equivalent solution in two photon spectra. In this experiments, the BMC of DEQCT with 80 and $120kV_p$ X rays was compared to ash weight of animal trabecular bone. Results : We obtained the mass attenuation coefficient of 0.2409 0.5608 and 0.2206 in $80kV_p$, and 0.2046, 0.3273 and $0.1971cm^2/g$ in $120kV_p$ X-ray spectra for water bone and fat equivalent materials, respectively. The BMC with DEQCT was acomplished with empirical constants $K_1=0.3232,\;K_2$=0.2450 and mass attenuation coefficients has very closed to ash weight of animal trabecular bone The BMC of empirical DEQCT and that of manufacturing DEQCT were correlated with ash weight as a correlation r= 0.998 and r= 0.996, respectively. Conclusion : The BMC of empirical DEQCT using the experimental mass attenuation coefficients and that of manufacture have showed very close to ash weight of animal trabecular bone.

• 한국해양학회지
• /
• v.18 no.1
• /
• pp.29-42
• /
• 1983

This stidy was intended to investigate the heavy metal contents in the bottom sediments of the continental shelt around the Jeju Island and ot the southern coastal area of the Korean Peninsula. For this study 39 bottom sedinent samples were taken from the study area using Phleger gramity corer and Snapper. The average contents of heavy metals were 59.1 ppm Zn, 362.6 ppm Mn, 63.8 ppm Cr, 15.7 ppm Pb, 10.0 ppm Co, 28.9 ppm Ni, 10.5 ppm Cu, and 2.7% Fe in the surficial sediments around the Jejr Island; and 79.ppm Zn, 384 ppm Mn, 8.6 ppm Pb, 17.8 ppm Ni, 23.2 ppm Cu, and 1.59 % fe in those of nearsgore of the southern coastal area respectively. The heavy metal contents were higher in the northwestern part around the Jeju Island compared to those in other region. However, these tendencies were not the result of pollution, but of the differences of grain size of the sedimenrs. In the nearshore of the southern coast, the heavy metal contents did not show any geographical tendency. However, those of Masan and Jinhae Bays wew higher than those of the other region. These seemed to be caused by waste disposal from the industrial compsex located at the adjacent land. Nevertheless these values of heavy metal content except for Zn and Cu in Masan Bay and inner bay of Jinhae are lower than the average values of the each world-wide data of the nearshore sedimentl. The pair correlations of the cach heavy metal elements were calculated by regressino analysis using VAX 780 computer. the following pair elements, such as Zn-Cu, Ni-Cu, Fe-cu, Cr-Cu, Co-Zn, Ni-Zn, Cr-Zn, Ni-Co, Fe-Co, Cr-Co, Fe-Ni, Cr-Ni and Cr-Fe show closely posetive linear correlations in the sediments around the Jeju Island. In general, the heavy metal content increases in proportion to the increase of the mean values of the grain size of the sediments around the Jeju Island. In the southern coastal area, in gineral, thepair correlations of each heavy metal elements did not southern coastal area, in general, the pair correlatttttions of rach heavy metal elements did not show any positive correlation except for the positive linear correlations of Cu-Zn, Cu-ni and Ni-Mn. It is interpreted as a result of the differences of the physecochemical environment of the sampling sites and also of the influences of the ondustrial wastes from the manufacturing factores located at the coastal zone of the study area.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.764-778
• /
• 1997

To find the medical insurance utilization of workers when suffering from low back pain, an analysis was made toward the data of medical insurance benefits matched with the general characteristics of 10,183 workers, who were registered continuously from 1993 to 1995 at a medical insurance cooperation for industrial workers. The results were as follows; 1. The period prevalence of the medical insurance utilization for low back pain for 3 years from 1993 to 1995 was calculated as 17.1% for male workers and 19.4% for female workers. Most common cause of utilization was other dorsopathies including the herniation of lumbar discs. 2. The utilization rate increased significantly as the present age and the age joining the company got older(p<0.001). As the duration of employment got longer, the utilization rate of the male showed the tendency to increase and that of the female increased significantly(p<0.05). Among male workers employed at cement and concrete manufacturing companies showed higher utilization rate and among female laborers showed significantly higher utilization rate than clerical workers(p<0.01). 3. Annual utilization rate for low back pain didn't show any difference, but the portion of other dorsopathies among cause of utilization showed the tendency to increase from 1993 to 1995. 4. The mean number of claims for outpatient medical care for low back pain differed significantly by age, working duration, type of industries, income level(p<0.05), and the mean of total visiting days for care of low back pain differed significantly by working duration. In conclusion, considering the fact that the medical insurance utilization for low back pain increased annually and other dorsopathies including the herniation of dorsopathies were increasing, an effective preventive or management program for low back pain toward worker employed at industries were required.

• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2011

In this study, we examined the impact caused by chronic exposure to Mn by investigating the degree of brain activation based on the data of recognition activities using fMRI (functional magnetic resonance imaging). A questionnaire survey, blood tests, and fMRI tests were carried out with respect to two groups. Group 1 was an exposure group consisting of 15 male workers who are 34 years old or older, and who worked for longer than 10 years in a shipbuilding factory as a welder. Group 2 was a control group consisting of 15 workers in manufacturing industries with the same gender and age. The results showed that blood Mn concentration of Group 1($1.3\;{\mu}g/dl$) was significantly higher than that of Group 2($0.8\;{\mu}g/dl$)(p < 0.001), and Pallidal Index (PI) of Group 1 was also significantly higher than that of Group 2 (p < 0.001). PI value of the group whose blood Mn concentration was $0.93\;{\mu}g/dl$ or higher was significantly higher than that of the group whose blood Mn concentration was less than $0.93 \;{\mu}g/dl$ (p < 0.001). As for brain activity area within the control group, the right and the left areas of occipital cortex showed significant activity and the left area of middle temporal cortex, the right area of superior inferior frontal cortex and inferior parietal cortex showed significant activity. Unlike the control group, the exposure group showed significant activity on the right area of superior inferior temporal cortex, the left of insula area. In the comparison of brain activity areas between the two groups, the exposure group showed significantly higher activation than the control group in such areas as the right inferior temporal cortex, the left area of superior parietal cortex and occipital cortex, and cerebellum including middle temporal cortex. However, in nowhere the control group showed more activated area than the exposure group. As the final outcome, chronic exposure to Mn increased brain activity during implementation of arithmetic task. In an identical task, activation increased in superior inferior temporal cortex, and insula area. And it was discovered that brain activity increase in temporal area and occipital area was more pronounced in the exposure group than in the control group. This result suggests that chronic exposure to Mn in the work environment affects brain activation neuro-network.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.715-725
• /
• 2012

This study was performed to make the method of food waste manufacturing for feeding to earthworm and different ratio of earthworm cast was investigated for applying vegetable plants that cultivated in a family or roof garden. We made conventional treatment of gardening soil and prepared soils with earthworm cast (the only fertilizer) at 30, 50, 70 and 100% for planting vegetable plants and then we studied its growth feature. The treatment was repeated three times with 12 weeks for each time. The cultivation of radish and chinese cabbage were managed at the same cultivation level for RDA standard cultivation method, and each sample of soils and plants was analyzed by appropriate analysis method. The growth investigation was performed 12 week after planting, and as for growth characteristics, height, leaf diameter, leaf number, leaf length, fresh weight and dry weight were investigated. The chemical characteristics, soils and plants, were surveyed. As for the growth characteristics investigated, radish and chinese cabbage showed the biggest growth in 70% and 50% treatment with average growth of all characteristics, height, leaf diameter, leaf number, leaf length, fresh weight and dry weight, respectively. Applying these results, a new equation for vermicast recommendation for radish and Chinese cabbage in summer (June-August) was presented. The earthworm cast 50% level with the gardening soil showed the high production in chinese cabbage. In case of radish, earthworm cast 70% with gardening soil level showed great growth, significantly.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.2
• /
• pp.93-100
• /
• 2003

Objectives : Because shipyard workers are involved with various manufacturing process, they are exposed to many kinds of hazardous materials. Welders especially, are exposed to bisphenol-A (BPA) during the welding and flame cutting of coated steel, This study was conducted to assess the exposure status of the endocrine disrupter based on the job-exposure matrix. The effects of the genetic polymorphism of xenobiotic enzyme metabolisms involved in the metabolism of BPA on the levels of urinary metabolite were investigated. Methods : The study population was recruited from a shipyard company in the f province. A total of 84 shipbuilding workers 47 and 37 in the exposed and control groups, respectively, were recruited for this study. The questionnaire variables included, age, sex, use of personal protective equipment, smoking, drinking and work duration. The urinary metabolite was collected in the afternoon and correction made for the urinary creatinine concentration. The of the CYP1A1, CYP2E1 and UGT1A6 genotypes were investigated using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) methods with the DNA extracted from venous blood. Results : The urinary BPA level in the welders group was significantly higher than in the control group (p<0.05). The urinary BPA concentration with the wild type UGT1A6 was higher than the other UGT1A6 genotypes, but with no statistical significant. From themultiple regression analysis of the urinary BPA, the regression coefficient for job grade was statistically significant (p<0.05). Conclusions : The grade of exposure to BPA affected the urinary BPA concentration was statistically significant. However, the genetic polymorphisms of xenobiotics enzyme metabolism were not statistically significant. Further investigation of the genetic polymorphisms with a larger sample size is needed.

• Journal of Engineering Education Research
• /
• v.11 no.4
• /
• pp.11-18
• /
• 2008

Companies have been making considerable efforts to develop innovative products for better competitiveness in the market, however, the education curriculum for innovative product development (IPD) in domestic universities needs has not been well developed. The present study was intended to identify the needs of students and practitioners regarding teaching subjects, pedagogical methods, and industry-academia collaboration that can be reflected in the development of IPD education curriculum. Through a literature survey 46 IPD teaching subjects of 7 categories (planning, feasibility analysis, concept development, product design, manufacturing process design, production, and ethics & law) were selected. Opinions on the preferences and importances of the teaching subjects, pedagogical methods, and industry-academia collaboration were collected from 53 college students who took courses of product development and 36 practitioners working in product development. While the students preferred the balanced teaching of all the subject categories, the practitioners suggested planning and concept development be taught with high importance; 6 subjects (product development strategy, customer needs identification, market research, concept generation method, design ideation method, and ergonomic design) received high ratings of preference and importance. The students preferred the mix of various pedagogical methods (lecture, discussion, presentation, practice, and case study) and provided needs on each pedagogical method. Lastly, the students wanted an opportunity of learning through industry-academia collaboration and the practitioners provided ideas for mutual benefits between industry and academia. The needs of students and practitioners identified in the study can be effectively applied to develop a better IPD education curriculum.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.56-77
• /
• 2019

Bi-Seok is a treasure trove of funeral rites and an important cultural asset that can shed light on the historical and social history of calligraphy, but research of the topic is still insignificant. In particular, research on the production method of Bi-Seok remains an unproven field. The production of Bi-Seok can be roughly divided into ma-jeong (refining stone), sculpture, and the Buk-chil (process of engraving letters) process. This article reveals some facts: First, performing ma-jeong to the Sang-Seok, Honyu-Seok, Bi-seok, which are known to be God's things. This process is needed because of the change in the perception of the Honyu-Seok due to the settlement and propagation of Confucian ceremonial rituals in the times of hardship in 1592 and 1636. As the crafting process of ma-jeong did not remain concrete, it was only possible to examine the manufacturing process of Bi-Seok through its materials and tools. Second, the rapid proliferation of Oh-Seok and Sa-jeo-chwi-yong (purchase of things made by private citizens) in the Yeongjo era has great importance in social and cultural history. When the Gang-Hwa-Seok of the commodity were exhausted, the Oh-Seok that was used by Sadebu (upper civil class) were used in the tomb of Jangneung, which made Oh-Seok popular among people. In particular, the use of Oh-Seok and the Ma-Jeong process could minimize chemical and physical damage. Third, the writing method of the Bi-seok is Buk-chil. After Buk-Chil of Song Si-Yeol was used on King Hyojong's tomb, the Buk-Chil process ( printing the letters on the back of the stone and rubbing them to make letters) became the most popular method in Korea and among other East Asian countries, and the fact that it was institutionalized to this scale was quite impressive. Buk-Chil became more sophisticated by using red ink rather than black ink due to the black color that results from Oh-Seok. Fourth, the writing method changes in the late Joseon Dynasty. Until the time of Yeongjo's regime, when inscribing, the depth of the angle was based on the thickness of the stroke, thus representing the shade. This technique, of course, did not occur at every Pyo-Seok or Shindobi, but was maintained by outstanding artisans belonging to government agencies. Therefore, in order to manufacture Bi-Seok, Suk-seok, YeonJeong, Ma-jeong, Jeong-Gan, ChodoSeoIp, Jung-Cho, Ip-gak, Gyo-Jeong, and Jang-Hwang, a process was needed to make one final product. Although all of these methods serve the same purpose of paying respects and propagandizing the great work of deceased persons, through this analysis, it was possible to see the whole process of Pyo-Seok based upon the division of techniques and the collaboration of the craftsmen.

• Journal of Ginseng Research
• /
• v.26 no.4
• /
• pp.219-225
• /
• 2002

Study was performed to know the effects of Panax ginseng C.A. Meyer hairy root due to $^{60}$ Co ${\gamma}$-ray irradiation. We irradiated the hairy roots under the various $^{60}$ Co ${\gamma}$-ray; 0.5~4 Krad. The growth of hairy roots is inhibited over 3 Krad treatment. The lateral roots are used as a cell line after removing the apical meristem of hairy roots irradiated below 2 Krad. We selected 206 hairy root cell lines having various different growth rates and forms, and incubated in the 1/2 Murashige & Skoog(MS) medium in the absence of hormone. We selected 10 out of 206 showing superior growth. Among those, ${\gamma}$-GHR 70 and ${\gamma}$-GHR 94 showed higher growth; 34.5, 44.7%, respectively. We observed shapable, sizable characteristics according to the width of the primary roots, the process formation of the lateral roots, and the growth of lateral roots. The discriminable cell line showed that primary root is thinner, and has a vigorous growth. 8 out of 10 had much more contents than control in the aspect of the ginsenoside. ${\gamma}$-GHR 59 and ${\gamma}$-GHR 94 showed higher contents; 19, 16.9%, respectively. Therefore, we selected ${\gamma}$-GHR 70, ${\gamma}$-GHR 94 as a superior cell line in the aspect of ginsenoside contents, and growth among those irradiated by ${\gamma}$-ray. According to content of ginsenoside, Rb$_2$ effective in anticancer has 7.5% of ${\gamma}$-GHR 59. Rc, also effective in anticancer showed 16.2% content increasement of ${\gamma}$-GHR 69. It is thought that those lines will be effective in manufacturing ginsenoside. Gene analysis (VNTRP) related to the mutation is in progress.