• Transactions of Materials Processing
• /
• v.32 no.1
• /
• pp.5-11
• /
• 2023

The aim of this study is to manufacture an aluminum pipe yoke of automotive steering system for lightweight. In a multistage cold forging process for aluminum pipe yoke, the surface defects frequently occur due to excessive deformation or friction during extrusion process for forming hollow pipe part. It is import to reduce the friction between the material and the forging die. This study investigated a multistage forging process with sliding die to reduce friction for aluminum pipe yoke. After evaluating by FE analysis, the forging experiment with the sliding die was carried out. As a result, it was possible to manufacture a sound aluminum pipe yoke.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.107-116
• /
• 2000

The purpose of this study was to suggest the data of base for automated underwear manufacture by analyzing the technology of the automated underwear manufacturing facilities in the area of Jeonbuk with a focus on Jeonju and Iksan. The case study samples were 6 underwear firms. The results were as follows : 1. Automated underwear manufacturing systems in the area of JeonBuk introduced over the entire period between 1990 and 1997. Most of Their production type was multi-kind and small-quantity production. 2. They were using Gerber, Assyst, Lectra, Microdynamics and Investronica systems as the CAD/CAM system, of which the Gerber system was mostly used by them. 3. In the stage of production planning and in the stage of preparation for production, most of them realized automation, but in the stage of main production, every firm did not realize automation. In most cases, they used both the stage of mechanization and the stage of unit process automation.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.482-490
• /
• 1999

7000 series Al alloy with good mechanical properties has been focused with tendency to reduce the components weight of aircraft and automobile. However, it is difficult to manufacture a sound extruded product because of segregation, grain growth, casting defect, surface defect, decreasing extrudability and so on. The objective of this study is to manufacture a new 7000 al alloy more than the extrudability of A7N01 and A7003 through controlling the weight (%) Mg, Zn, Si. Hot extrusion experiments on the axisymmetric rod are performed in 500℃ and also performed analysis of the same process using unmerical analysis method, a coupled rigid-thermoviscoplastic finite element method. Extrusion limit diagram was obtained for the developed alloy by FE-simulation in order to define the relationship of extrusion speed and initial billet temperature.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.467-469
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto Y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2150-2152
• /
• 2000

In this report, a technical trend of manufacture apparatus of PDP (Plasma Display Panel) was described. Though the manufacture process of PDP was not yet established, a big progress was achieved by much maker recently. Final target for PDP of much maker is focused on the cost down of PDP.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.27-32
• /
• 2008

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.27-30
• /
• 2014

Alloy tool steel such as SKD11 and SKD61 or high speed tool like SKH51 are used as materials for semiconductor dies. Cavities, curl blocks, pot blocks and housings are made from those materials. To make those parts from alloy tool steel or high speed tool, one utilizes discharge machining, and mechanical machining including machining center, milling, drilling, forming grinding and others. In the process of cutting machining and polishing, the die materials become unsuitable for machining owing to bubbles and foreign substances in them, which hinders production process. Therefore, this study focuses on die material selection criteria, and on analysis and comparison of material characteristics to help companies to solve their problems, make die manufacture less burdensome and extend die life.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.159-166
• /
• 2002

Today print media survives in tough struggle for existence and is deep to development of new technology as well as edit style and manufacture environment improvement that utilize actively a computer to establish new phase, and Desk Top Publishing or information industry department and link development are required. Propose analysis and solution way that this paper is examining concept of electronic publishing and manufacture progress, and analyze reciprocity degree of electronic publishing process through active and cluster analysis, and electronic publishing knows.

• Transactions of Materials Processing
• /
• v.11 no.4
• /
• pp.323-331
• /
• 2002

The combination of rapid prototyping(RP) and rapid tooling(RT) has a potential for rapid manufacturing of three-dimensional parts. In the present study, a new RP system transfer type Variable Lamination Manufacturing using Expandable Polystyrene Foam (VLM-ST), is proposed to fabricate net shapes of three-dimensional prototypes. Various three-dimensional parts, such as a knob shape and a human head shape, are manufactured by the VLM-ST apparatus. In addition, a new rapid tooling technology, which utilizes a room temperature vulcanizing (RTV) molding technique and a triple reverse process technique, is proposed to manufacture net shapes of three-dimensional plastic parts using the prototypes of VLM-ST. A plastic part of the knob shape is produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacture of a plastic knob within two days.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.121-130
• /
• 1998

In recent years, a number of metal machine parts, in the field of the car manufactures and electronic goods for home, have been replaced by nylon-6 in order to weight, cost, and a period of process of manufacture. It's because nylon-6 materials as an industrial material have higher economical and productive advantage than the metalic ones. However, in domestic injection manufactures, there are few data on fiber glass synthetic on nylon-6. It is said that plastic in process of manufacture using the same injection materials make their results different in large scale according to fiber glass synthetic rate conditions. In this study, we have studied effects of the glass fiber synthetic rate on the characteristics of fatigue failure for nylon-6.