• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.251-256
• /
• 2001

This research is focused on an improvement of additional value of high grade limestone. To obtain the basic data of precipitated calcium carbonate(PCC), studies of physical properties of limestone, calcination and hydration characteristics, the characteristics to manufacture quick lime, hydrated lime, ground calcium carbonate and precipitated calcium carbonate were performed. In the carbonation process, formation of rombohedral must be kept under $10^{\circ}C$ for reaction. Although the temperature of reaction of lime milk was limited under $30^{\circ}C$ for a colloidal PCC manufacture, over $50^{\circ}C$ for spindle type PCC. The recommended reaction conditions for colloidal PCC are $20^{\circ}C$ of reaction temperature, 4% of $Ca(OH)_2$ concentration, 1000rpm of stirring rate and 200ml/min of $CO_2$ gas flow rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.93-97
• /
• 2004

This paper is purpose to the design and manufacture of rope brake for elevator. In generally, rope brake systems are second safety device for elevator. Therefore rope brake systems are very important device and very difficult device of design and manufacture. Also, this paper is object to reduced process order and process error.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2011

A weaving machine for texture industry uses a lot of needles and the nib of these needles is necessary to be kept with sharp edge. The re-grinding of the needle by a special purpose of the grinding wheel can be selected for achieving this aim. This study focused on the manufacture and performance assessment the special grinding wheel. A forming mold for the grinding wheel was designed and a sintering process for furnace process control was established. Manufactured wheels were tested for determining suitable grade of the wheel. The selection of optimal grinding conditions was achieved by a response surface method and a genetic algorithm.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.2
• /
• pp.46-52
• /
• 1993

The estimation of yield for semiconductor devices requires not only establishment of critical area but also a new parameter of process defect density that contains inspection mean defect density related cleanness of manufacure process line, minimum feature size and the total number of mask process. We estimate the repaired yield of memory devide, leads the semiconductor technique, repaired by redundancy scheme in relation with defect density distribution function, and we confirm the repaired yield for different devices as this model. This shows the possibility of the yield estimation as statistical analysis for the condition of device related cleanness of manufacture process line, design and manufacture process.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.620-627
• /
• 2005

In this study, life cycle assessment (LCA) on one of corrugated cardboard box as functional unit was carried out. System boundary of this study divided according to raw material acquisition, corrugated cardboard manufacture and corrugated cardboard box manufacture stage. And environmental impacts are evaluated on each stage and sub-process. The impact categories are classified into eight categories of abiotic resource depletion, global warming stratospheric ozone depletion, photochemical oxidant creation, air acidification, eutrophication, ecotoxicity and human toxicity. From the results, it is found that environment impacts at raw material acquisition stage is the highest as about 92% of whole stage due to liner board manufacture stage. The highest environmental impacts at sub-process of corrugated cardboard and box manufacture stage is a single facer and D/W backer process that included as main process in corrugated cardboard manufacture, and is caused by used energies like electricity, B-C oil, and etc. And then diagnosis for clean production process system of package is carried out. Through diagnosis, on loss rate is reduced and inner pressure intensity of box is improved. After improvement, environmental impact was decreased about 3.8% compared with before improvement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.264-266
• /
• 2005

Manufacture of OLED device used thermal evaporation method. However thermal evaporation method has many defect as thermal damage of substrate, difficult of dopant rate control and low utilization of organic materials. so we suggest PLD(Pulsed Laser Deposition) method that solution of these problems. PLD method has many advantage as without thermal damage, easy indicate of deposition rate per one pulse and good utilization of organic materials. In this paper we apply the PLD method for manufacture of device so we present high efficiency device manufacture using PLD method that has good deposition uniformity, surface rough and deposition rate.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.191-201
• /
• 2017

Recently, de-industrialization phenomenon has been intensified in global. It caused negative issues of manufacturing economy, so many countries are carrying out a policy to protect and promote their manufacture industry. Also in Korea, government is implementing a policy to promote their manufacture based technique and process. It was named "Ppuri industry". We studied how important Ppuri industry is in Korean manufacture economy and the relation of between the metal industry and Ppuri industry. Finally, we analyze the problem of korean promotion policy of Ppuri industry and suggest an alternative policy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1101-1104
• /
• 2004

A brake spider in an irregular shape, which is used as a part in the braking system of a vehicle like a big truck and a trailer, is subjected to a large torque and hence requires both strength and endurance over the brake heat. Manufacture of this product in practice is generally composed of hot forging processes and machining. At the present study, two or more processes were considered for the hot forging. With an initial circular billet, blocker and finisher processes were analyzed using the rigid-plastic finite element method and also in addition to the preforming process. Proper forging processes to manufacture an irregular product without forging defects, which are preforming, blocker and finisher, were discussed and commented upon.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.531-539
• /
• 2009

The environment of automobile industry in the world is rapidly changing. It is changing of high oil price, technology, environment and construction of competition by newly rising an economic district. Automobile company is focusing on three issue because they want to reinforce competition of automobile industry in the world. That is innovation of production profit management through quality management and Lean. Chance of success is separated in R&D, providing distribution, manufacture, distribution, selling in automobile industry. Emphasis on development process, distribution process, manufacture process, circulation and selling process for strengthening the competitiveness and guarantee. In this thesis, we try to analysis the data set period of automobile production by using survival analysis. While using mean comparison of general statistics commit mistakes, survival analysis can used for including censored data in order to heighten analysis efficiency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.65-70
• /
• 2007

In this study, we analyzed about that after design form manufacture master pattern in Rapid Prototyping-RP through design program, processes to manufacture prototype using Vacuum Casting. In Rapid Prototyping-RP, there is an en-or by shrinkage of resin and, in Vacuum Casting, there is an error by shrinkage of silicon. To select condition which shrinkage become the minimum of each process, manufactured prototype after using Full Factorial Design of Design of Experiments, We could confirm shrinkage using reverse engineering and that result came into effect ANOVA 2-way. We applied errors of each process to master pattern, and then presented the method to improve flood control precision of prototype of Vacuum Casting.