• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2016

The earth has been warming due to $CO_2$ gas emissions from fossil fuel cars and a ship. So the hydrogen fuel cell vehicle(FCV) using hydrogen as a fossil fuel alternative energy is in the spotlight. Hyundai Motor Company of Korea and a car companies of the US, Japan, Germany is developing a FCV a competitive. Obtained hydrogen as a by-product of the coke plant, oil refineries, chemical plants of steel mill, coal is reacted with steam at high temperatures, methane gas, manufacture of high purity hydrogen Methane Steam Reforming and hydrogen detachable reforming method using the Pressure Swing Adsorption or Membrane Reforming technical or decomposition of water to produce electricity. Hydrogen is the electronic industry, metal and chemical industries, which are used as rocket fuel, etc. are used in factories, hospitals, home of the fuel Ene.Farm system or FCV. And a method of storing hydrogen is to store liquid hydrogen and a method for compressing normal hydrogen to the hydrogen container, by storing the latest hydride or Organic chemical hydride method is used to carry the hydrogen station. Korea is currently 13 hydrogen stations in place and in operation, plans to install a further 43 places.

• Journal of the Korea Furniture Society
• /
• v.24 no.2
• /
• pp.183-190
• /
• 2013

This article intends to explore the formation of furniture terms with the name of furniture, furniture materials, tools, and machinery from eight furniture companies manufacturing their own different furniture items. As a result of this study, the terms can be abstracted as four things as follows. First of all, the terminology that the furniture firms is are unified over 80 percent and has no problem on the communication among the companies. Especially office furniture all is using common words because the terms are almost fixed by an administration agreement relating to the Supply Administration. Second, the furniture terms being used at the fields are mixed with Korean, English, and Japanese, and this current state shows more at small businesses than at large businesses Third, the terms of foreign words, almost English, present 48 percent as 156 words among the total 325 terms. Japanese shows 6 percent as 21 terms but it tends to be handed down from mouth to mouth with inaccurate conditions. Finally, the formation of the terms are from the original words or English, from the combination of Korean and foreign words for convenience at the fields, and from being created as Korean newly in considering Korea's special situation.

• Journal of Dairy Science and Biotechnology
• /
• v.30 no.2
• /
• pp.75-81
• /
• 2012

Molds cause severe cheese deterioration, even though some white and blue molds are used for the manufacture of Camembert and Blue cheese, respectively. The species of Geotrichum, Moniliella, Aspergillus, Penicillium, Mucor, Fusarium, Phoma, and Cladosporium are the main fungi that affect contamination during cheese ripening. Once deteriorated by fungal spoilage, cheese becomes toxic and inedible. Fungal deterioration of cheese decreases the nutritional value, flavor profiles, physicochemical and organoleptic properties, and increases toxicity and infectious disease. Fungal contamination during cheese ripening is highly damaging to cheese production in Korean farmstead milk processing companies. Therefore, these companies hesitate to develop natural and ripened cheese varieties. This article discusses the recent and ongoing developments in the removal techniques of fungal contamination during cheese ripening. There are 2 categories of antifungal agents: chemical and natural. Major chemical agents are preservatives (propionic acid, sodium propionate, and calcium propionate) and ethanol. Among the natural agents, grapefruit seed extract, phytoncide, essential oils, and garlic have been investigated as natural antifungal agents. Additionally, some studies have shown that antibiotics such as natamycin and Delvocid$^{(R)}$, have antifungal activities for cheese contaminated with fungi. Microbial resources such as probiotic lactic acid bacteria, Propionibacterium, lactic acid bacteria from Kimchi, and bacteriocin are well known as antifungal agents. In addition, ozonization treatment has been reported to inhibit the growth activity of cheese-contaminating fungi.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.280-291
• /
• 2020

Objectives: Hazard classification is a controversial issue in the new MSDS system in which chemical companies have to prepare and submit MSDS for chemicals that they manufacture or import to the competent authorities according to the amended Occupational Safety and Health Act. The aim of this study is to suggest how to apply and manage harmonized hazard classification criteria and results by investigating current hazard classification systems and trends. Methods: The domestic issues about different hazard classification criteria and results were investigated by reviewing the literature and business outcomes regarding KOSHA. We also checked official and unofficial reports from the UN to understand international discussion about the topic. Chemical hazard classification results from agencies providing chemical information were analyzed to compare a harmonized rate between classifications. Furthermore, a field survey of a few chemical companies was conducted. Results: Under the related competent authorities, an integrated standard proposal was developed to harmonize the domestic hazard classification criteria. Although harmonized chemical information is strongly needed, we recognized the uncertainty and difficulty of harmonized hazard classification from the UN global list project review. In practice the harmonization rate of the classification was generally low between the classification in KOSHA, MoE, and EU CLP. Among hazard classes, health hazards largely led the disharmony. The field survey revealed a change of perception that the main body of chemical information production is manufacturers. Approaches and solutions about hazard classification issues differed depending on business size, types of chemical handling, and other factors. Conclusions: We proposed reasonable ways by time and step to apply hazard classification in the new MSDS system. Chemical manufacturers should make and offer chemical information including responsible hazard classifications. The government should primarily accept these classifications, evaluate them by priority, and support or supervise workplaces in order to communicate reliable chemical information.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.451-459
• /
• 2014

To solve the serious problem of insufficient manpower in medium and small scaled companies, our country allows introduction of foreign manpower for 5 business types such as manufacture industry, service industry, etc. and there are 226,825 people who entered by employment license system(E-9) in Sep. 2013. However, according to the results of investigation "actual status and difficulties of foreign manpower's employment of medium and small scaled manufacturing companies" of KFTA in 2013, 36.4% of respondents responded that current scale of introducing foreign manpower is insufficient to solve difficulties of insufficient manpower in industrial world and 37.7% of them responded that the quarter of new employment is insufficient. So, they hope that current quarter system of foreign manpower can be abolished. Meanwhile, introduction scale of foreign manpower was decided by 53,000 people so as to solve enterprise difficulties in manpower and vitalize economics this year, but illegal aliens are 39,623, more than 17.5%, in Sep. 2013 after employment expiration. Therefore, it becomes serious social problem. Government displays various support businesses so that foreign workers after employment expiration can return to their homeland legally. This thesis intends to find measures to maintain royalty for our country and support their smooth resettlement through the analysis on homecoming support business of foreign workers.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.553-559
• /
• 2015

The Korean Ship Supply market scale estimated at 5.7 trillion won in 2014. Much activated and related 400 of companies located in Busan, Ulsan near Busan area. But there have many companies had lower average revenue like a 2 billion won, Also the economic slump of world maritime port industry and low priced ship supply manufacture like as China and Other developing countries, those things made a gloomy situation in domestic industry. Therefore, in this study focused on Ship Supply Common Logistics for activation plan of Ship Supply Industry. And also determine which factor is most important to Ship Supply Common Logistics and analyzed AHP and IP analysis on 16 factors based on literature review. The result, most important factor was cost for Ship Supply Common Logistics.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.129-134
• /
• 2021

A power tool is a tool used to manufacture and process various structures using a motor that is a power source. Using a motor that uses electricity as a power source, a reduction device, power transmission and conversion device functions are built-in to make the tool rotate, reciprocate, and vibrate. It is a work tool designed to assist the user's movement skills. In the case of Korea, the power tool industry has a short history and is lagging behind advanced countries such as Germany, the United States, and Japan in terms of technology level, market share, and recognition. In addition, electric drivers used in Korea are foreign products from the US and European countries, and the domestic market also prefers 100% foreign companies, and multinational companies are investing a lot in the domestic market. Therefore, technological development must follow in order to develop domestic technology and secure a consistently high market share. The purpose of this thesis is to design a motor driver with high output performance of motor performance, miniaturization, and high speed in accordance with the basic performance requirements of power tools, and finally research developments that can be applied to industrial and medical applications.

• International Journal of Computer Science & Network Security
• /
• v.23 no.2
• /
• pp.111-125
• /
• 2023

Due to the car's central role in modern life, the industry has become more fiercely competitive, with each manufacturer doing everything it can to attract buyers with features like plush interiors, comprehensive warranties, and helpful customer service departments. Customers may not have the luxury of buying a new car, so they will have to buy a used car. Nevertheless, in most cases, the customer (car driver) may be deceived about the vehicle information and history and thus will be confused in making his/her decision to purchase. In addition, after all attempts to obtain vehicle information (plate number, model, year of manufacture, number of maintenance times, accidents, etc.), the customer's many attempts may fail. In general, the government records and verifies the information of all cars, even those that pass through their borders. However, there might still be some trouble in obtaining this information. From this standpoint, we will design a website that makes it easier for car drivers, car companies and governments to carry out all the above-mentioned processes. It will also allow users, whether a driver or a car company, to inquire about all vehicle information through detailed and integrated reports on its condition since its entry into the Kingdom of Saudi Arabia until the present time, in addition to information supported by numbers and statistics to ensure the integrity and reliability of the information. This platform will save the trouble of searching for car information for drivers and car companies. It will also help governments keep track of the information of all cars entering and leaving the Kingdom of Saudi Arabia, which will contribute to facilitating the process of viewing the history of any car that has previously entered the Kingdom's borders.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.716-721
• /
• 2004

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of speedy prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the ${CAFL}^{VM}$(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. In this paper, we design an algorithm that the cutting path of a laser beam which is controlled with constant speed. The laser beam is tangentially controlled in order to solve the inaccuracy of a 3D model surface. The designed algorithm for constant-speed path control and tangent-cutting control is implemented and experimented in the ${CAFL}^{VM}$ system.