• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.17-24
• /
• 2006

In this paper, we propose a stress analysis on foot by lifting task attitudes. Maximum force and peak pressure were measured on 8 body regions by Pedar system in order to analysis the stress which is affected by task style and angle on foot when Manual Materials Handling task. As for the peak pressure of the whole foot as to the task height during the lifting task, the height from Knuckle to Shoulder was the least in the peak pressure. Also, as for the maximum force and the peak pressure of the whole foot as to the task angle during the lifting task, it could be seen that the more an angle increases, the stress influencing on a foot jumps. As for the maximum force and the peak pressure by foot region as to the task height in case of the lifting task, the height from Knuckle to Shoulder is indicated the smallest value in the maximum force and the peak pressure, thus there is necessary to attain the work design that considered this. Also, as for the maximum force by foot region as to the task angle in case of the lifting task, 0° tasking is indicated to be least, thus there is necessity to be attained the tasking design in a bid to prevent the existence of an angle. The results of this paper are thought to be helpful to the suitable work design, to the prevention of musculoskeletal disorders related to the lower limbs, and to the design of ergonomic safety shoes.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.96-100
• /
• 2012

Low back pain (LBP) is a major issue in modern industrialized society which is mainly caused by manual material handling (MMH) tasks. The objective of this study was to provide scientific data for establishing work standard for Korean workers throughout the laboratory experiment including some specific lifting tasks. Thirty male college students were recruited as participants. The maximum voluntary contraction (MVC), recommended weight limit (RWL), and psychophysical safety weight using Borg's CR-10 scale were studied. Results showed that the RWL was 8.4% MVC higher than the proposed psychophysical safety weight. Based on this result, it is suggested that the NIOSH lifting equation (NLE) should not be directly applied to Korean without reasonable modifications. The ratio of psychophysical safety weight to MVC was ranged from 20.1 to 26.4%. It is expected that use of the methodology in this study may provide better expectation of the work ability of Korean for reducing lower back pains caused by MMH.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.95-99
• /
• 1997

Most studies in manual material handling (MMH) have paid more attention to single MMH activities-lifting, lowering, carrying, holding, pushing or pulling and have ignored combined activities. Also, many studies have been involved with two-handed MMH activities rather than to one-handed MMH activities. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (e.g. lifting a box, then carrying the box, and lowering the box). The objective of this study was to utilize the psychophysical approach to examine the combinations of lifting, carrying and lowering activities from a simulated industrial task involving one- handed and two-handed combined tasks and to develop mathematical models for combined tasks. Ten male students served as subjects for the study. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks-lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box form knuckle to floor height -were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. Combined MMH capacities models for one-handed tasks were developed. Te advantages and disadvantages of different models are discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.615-616
• /
• 2009

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.26 no.1
• /
• pp.27-36
• /
• 2020

Background: Exercise in the quadruped position is performed to improve body and shoulder stability. This study examined the muscle activity of the trunk muscles according to the distance of the weight shift when lifting one leg in the quadruped position. Methods: Ten healthy 20 to 40 years old males were tested as subjects. All subjects moved their body weight to 0, 5, and 10cm on the opposite side of the leg lifter while maintaining the quadruped position. The surface electrodes recorded the electromyography data during the one leg lifting. Results: As the weight shift distance was increased, there was a significant difference in muscle activity of both serratus anterior, multifidus and internal oblique muscles (p<.05). Left and right serratus anterior and right internal oblique were most activated when weight shift distance was 0cm (p<.05). Conclusion: Shoulder and lumbar stabilization exercises should be applied in the absence of a weight shift distance during quadruped exercise.

• Journal of agricultural medicine and community health
• /
• v.44 no.3
• /
• pp.138-143
• /
• 2019

Objectives: The purpose of this study was to assess the ergonomic risk factors in beekeeping, and to evaluate the effectiveness of assistive device hive lift. Methods: This study included 30 subjects of beekeeper in Pocheon, Korea. We assessed the ergonomic risk of main task in beekeeping with NLE, OWAS and evaluate the effectiveness of hive lift. We also surveyed prevalence of musculoskeletal symptoms among the subjects based on the Korea Working Condition Survey. Results: Moving to different floral origin, internal inspection of beehives, feeding syrup is the most burdensome to musculoskeletal system (NLE LI value=2~3. OWAS action category=4). The prevalence of musculoskeletal symptoms (lower and upper extremities) among the subjects was over 80 %. The introduction of assistive devices in the three hazardous tasks has dramatically reduced the risk by removing manual lifting hives (OWAS action category<1). Conclusions: Beekeeping is a heavy workload on the musculoskeletal system because it has a lot of manual lifting task. As a result of applying the hive lift, the burden could be reduced.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2005

A variety of ergonomic assessment methods of lifting tasks known as a major cause of work-related lower back pain have been used. But there is a limited information in choosing the most appropriate assessment method for a particular job and in finding out strengths and weakness of the methods. The purpose of this study was to assess and compare the ergonomic risks of lifting tasks in a marine diesel engine production industry by three lifting ergonomic assessment tools widely used: the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE), the Washington Administrative Code 296-62-0517(WAC), and the Snook Tables. Lifting index(weight of load/Recommended Weight Limit) of NLE($LI_{NLE}$) was above 1 at 34 tasks(75.6%) of a total number of 45 lifting tasks. LI of WAC($LI_{WAC}$) was above 1 at 11 tasks(24.4 %). LI of Snook Table($LI_{Snook}$) was above 1 at 29 tasks(64.4%). Thus, LI was high in orders of $LI_{NLE}$ > $LI_{Snook}$ > $LI_{WAC}$. There were significantly high correlations among three Lls(p<0.01). The correlation coefficients between $LI_{NLE}$and the other three Lls($LI_{WAC}$ and $LI_{Snook}$) were r=0.93 and r=0.88, respectively. The linear regression equations were y = 0.444x + 0.11(r=0.93) between $LI_{NLE}$ and $LI_{WAC}$, y = 0.93x + 0.008(r=0.88) between LI(NLE) and $LI_{Snook}$. The LI values by WAC was significantly lower than those by the other tools. The compared features, strength and limitation among these tools were described in this paper.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.2
• /
• pp.87-99
• /
• 2000

This study aims to examine a fuzzy logic-based human expert EMG prediction model (FLHEPM) for predicting electromyographic responses of trunk muscles due to manual lifting based on two task (control) variables. The FLHEPM utilizes two variables as inputs and ten muscle activities as outputs. As the results, the lifting task variables could be represented with the fuzzy membership functions. This provides flexibility to combine different scales of model variables in order to design the EMG prediction system. In model development, it was possible to generate the initial fuzzy rules using the neural network, but not all the rules were appropriate (87% correct ratio). With regard to the model precision, the EMG signals could be predicted with reasonable accuracy that the model shows mean absolute error of 8.43% ranging from 4.97% to 13.16% and mean absolute difference of 6.4% ranging from 2.88% to 11.59%. However, the model prediction accuracy is limited by use of only two task variables which were available for this study (out of five proposed task variables). Ultimately, the neuro-fuzzy approach utilizing all five variables to predict either the EMG activities or the spinal loading due to dynamic lifting tasks should be developed.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.85-93
• /
• 2013

Modern fire fighting jobs have been expanded to include areas of rescue, emergency medical service as well as conventional fire suppression, so that load for fire fighting jobs has been increased. Specifically, musculoskeletal disorders (MSDs) such as low back injury have been considered as one of major industrial hazards in heavy manual material handling during fire fighting jobs. This study tried to evaluate risk levels and to prepare background for reducing risk levels associated with heavy manual material handling during fire fighting jobs. This study applied two major tools in evaluating heavy manual material handling jobs which were NLE (NIOSH Lifting Equation) and 3DSSPP (3D Static Strength Prediction Program). A risk index in terms of heavy manual material handling during fire fighting jobs was identified. This index consisted of seven risk levels ranged from nine points (the first level) to three points (the seventh level). There was no job associated with the first level (the highest risk level) of index. There was only one job (life saving job) belonging to the second level (the second highest risk level) of index. The third level had jobs such as usage of destruction equipment and lifting patient. A total of basic eighteen jobs was categorized into six different levels (2nd-7th levels) of index. The outcome of the study could provide a good basis for conducting job intervention, preparing good equipment and developing good education program in order to prevent and reduce MSDs including low back injury of fire fighting jobs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.50-54
• /
• 1999

In the process of designing a wheel balancer an ergonomic evaluation model has shown that manual tire handling onthe machine was often the major problem, The root of the problem lay in the design of machine's shaft which is influenced by the opeative handling task. Several methods were reviewed for determining the correct shaft' sizes but the Revised NIOSH Equation and the Lifting Stress Calculator were found to be the only suitable models for this study. An application of these mathematical models has shoed that the shaft length and the shaft height were the most critical measurement By analyzing these conclusion s the correct shaft size parameters became clearly defined.