• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.5-10
• /
• 2003

This paper is mainly concerned with the assessment of safe navigation between ships moving each other in restricted waterways. The manoeuvring simulation was conducted parametrically to propose an appropriate sage speed and distance, which is required to avoid sea accident under the different conditions, such as ship-velocity ratios, ship-length ratios, separation and stagger between ships. The manoeuvring characteristics based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in confined water.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2011

SHS(Ship-Handling Simulator) is virtual generation of vessel traffic situation under various environmental conditions. Recent, with the introduction of MSA(Maritime Safety Audit), SHS is being used as a key facility to determine the safety of navigation. However, the current audit techniques specified in the implementation guidance of MSA have been prepared by generalizing common procedures and evaluation methods used by institutions operating simulator systems. Therefore, they need to be reviewed and supplemented. This study analyzed the adequacy of current audit techniques based on the limitations and problems, then suggested the advanced scheme of SHS such as standardization of ship models, standard manoeuvring and evaluation method. The results of this research will contribute to improving the quantification and reliability of audit techniques used in the MSA as well as upgrading of the simulator system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.552-557
• /
• 2015

A numerical simulation studies were performed to investigate a manoeuvring characteristics as function of stern hull form with the mathematical model. In order to consider the effect of the stern hull form and obtain the manoeuvring characteristics, a parameter($C_{wa}$) which is aft. water plane area coefficient is modified. Because modifying $C_{wa}$(${\pm}2%$) means that the stern hull form is modified to V-type or U-type, the numerical simulation was performed with this modified $C_{wa}$. A changing trend for the manoeuvring characteristics not only in deep water but also in shallow water such as directional stability, turning and zig-zag was investigated and presented as the results. Present study showed that the manoeuvrability in shallow water largely changed when the draught and water depth ratio(=d/H) become 0.5, and the stern hull form can affect to the manoeuvrability of a vessel navigating in restricted water depth. In addition, it showed that approaching the stern hull to U-type makes the advance and tactical diameter of turning motion large and the overshoot angle of zig-zag motions small. Otherwise, it showed approaching the stern hull form to V-type makes the advance and tactical diameter of turning motion small and the overshoot angle of zig-zag motions large in the present study.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.303-308
• /
• 2006

In this paper, the authors calculated manoeuvring motions of a large container vessel approaching to the newly built container piers to get alongside to her berth in Busan harbour. The motion calculations were done by using fixed coordinate system and the object of the calculations is to check the manoeuvring motions are safe or not for berthing the large vessel to her berth. The result of calculations manifested that a large container vessel can get alongside to the piers without any difficulty under normal weather conditions by using 2 Z. Peller tug boats of 4500 H.P. each and also these demonstrated it is difficult to conduct and get her alongside to the piers under rough weather conditions of wind force 16.9m/sec or more. Under rough weather conditions of 6 by beaufort scale the average wind velocity is about 13.5m and if we add 25% increase of the normal velocity to it, the wind will becomes a gust of 16.9m/sec. So it is advisable to avoid conducting a large container vessel to the pier under the rough weather conditions of 6 or more by beaufort scale. Also, I is better to use 3 Z. peller tug boats of 4500 HP. each under the above mentioned rough weather in a case of unavoidable circumstances.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.247-252
• /
• 2003

This paper is mainly concerned with the assessment of safe navigation between ships moving each other in restricted waterways. The numerical simulation of manoeuvring motion was conducted parametrically to propose an appropriate safe speed and distance, which is required to avoid sea accident under the different conditions, such as ship-velocity ratios, ship-length ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference between two ships were considered as 0.6, 1.2, 1.5 and the ones of ship-length difference were regarded were regarded as 0.5, 1.0, 1.18. From the inspection of this investigation, it indicates the following result. Firstly, the separation between ships is more needed for the small vessel, compared to the large vessel. Secondly, the lateral distance between ships is necessarily required for the velocity ration of 1.2, compared to the cases of 0.6 and 1.5. The manoeuvring characteristics based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in confined water.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.90-101
• /
• 1992

Some practical methods have already been proposed for predicting the characteristics of ship manoeuvring motions at relatively high advance speed. However, these methods can hardly be applied to motions of ships in starting, stoppint, backing and slow steaming conditions, even though such extensive motions are of vital importance from a safety point of view particularly in harbour areas. The method presented here aims at predicting the characteristics of ship manoeuvring at low advance speed, which covers starting, stopping, backing and slow steaming conditions. The force mathematical models at large angles of incidence to the hull as well as under the tilde range of propeller operations are formulated. Simulations of various manoeuvres at low advance speed are carried out for two types of merchant ship, i.e. a LNGC and a VLCC. Comparisons between simulations and corresponding full-scale measurements or free-running model tests provide a first verification of the proposed mathematical models.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.89-94
• /
• 2004

Up to now a lot of the study on ship collision avoidance systems has proceeded actively. However the frequency of ship collision accidents didn't decreased. If there is collision risk in close quarters situation none the less manouvering ship for collision avoidance according to the system, only use of TCPA and DCPA as input factor for collision risk decision is not useful to avoiding collision action. For the recent 5 years by the analysis of first observation distance about approaching ship in domestic collision accidents, nearly $45\%$ of accidents is close first observation less than 2 miles. Therefor it is essential part for safety navigations to study for collision avoidance action in close encounter. In this paper, as foundation study of supporting collision avoidance manoeuvring for navigators, we proposed ship collision avoidance support model in close quarters situation through analysis of collision accidents for effective getting rid of the causes.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.40-41
• /
• 2009

In general, ships are towed to keep the safe operations in harbor or channel by tug boats. Due to increase in ocean traffic, many accidents are happened in harbor or channel in these days. Therefore it is necessary to predict manoeuvrability of tug-barge system, and to assure the safety of that system. Turg-barge system is composed of tug boat, barge, and towing cable, connecting both ships. Manoeuvring equations of tug-barge system are suggested, and the scopes of model tests are discussed to establish the mathematical models for tug boats in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.1-16
• /
• 2001

In view of the fact that marine casualties have more often occurred recently, there is a need for ship-handling simulator as a useful tool for maritime training, safety assessment and so on. Moreover various kinds of hull forms have appeared for the purpose of improving ship manoeuvrality. Therefore ship-handling simulator is in need of a database for various ships, and it can make diverse maneuvering simulations possible to apply respective mathematical model to ship-handling simulator. In this paper, we adopted twin-screw and twin-rudder ship and discussed mathematical model of maneuvering motions for her. It was discussed from the viewpoint of hull damping forces at low advance speed and interaction between hull, propeller and rudder. Using this model, maneuvering motion of twin-screw and twin-propeller ship was simulated numerically and her principal manoeuvrability was examined.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.33-47
• /
• 1994

On developing port system, the performance tests of system in relation to ship maneuver generally consists of the three parts: the channel transit, the manoeuvring in a turning basin and the docking/undocking. The quantifications of risk of an accident has priviously been difficult due to the low occurrence of accidents relative to the number of transits. Additionally, accident statistics could not be related port system because of the large number of factors contributing to the accident. such as human error, equipment failure, visibility, light, traffic. etc. In case of the channel transit, "Relative Risk Factor(RRF)" or "Relative Risk Factor for Meeting Traffic" was proposed as the as the measures derived to quantify the relative risk of accident by M.W.Smith. This factor measure the tracking performance, the turning performance and the passing performance at meeting traffic. On the other hand, the safety of berthing maneuver is not measured with a few evaluating factors as controlled due to complex controllabilites such as steering, engine, side thrusters or tugs. This work, therefore, aims to propose the evaluating measure by the Analytic Hierarchy Process(AHP). Six experimental scenarios were establised under the various environmental conditions as independent variables. In every simulation, the difficulty of maneuver was scored by captain and compared with AHP scores. The results show almost same and from which the weights of eight evaluating factors could be fixed. Additionally, the limit value of relative factor in berthing safety to six scenarios could be estimated to 0.11.e estimated to 0.11.