• Journal of Ocean Engineering and Technology
• /
• v.37 no.4
• /
• pp.129-136
• /
• 2023

To evaluate manoeuvring performance of merchant ships, the mathematical modeling group (MMG) or computational fluid dynamics (CFD) simulations are used. However, it is difficult to use the MMG to evaluate the manoeuvring performance of fishing vessels, thus research using CFD simulations is necessary. Also, since the course-changing and turning ability is crucial in fishing operations, a rudder design suitable for fishing vessels is necessary. This study designs a rudder using National Advisory Committee for Aeronautics (NACA) airfoil sections and evaluates its manoeuvring performance. A CFD model is used to evaluate the manoeuvring performance of the fishing vessel, and turning and zig-zag tests are conducted. The effectiveness of using CFD simulations based on Reynolds averaged Navier-Stokes equations to assess the manoeuvring performance of fishing vessels was validated. No significant difference was found in the manoeuvring performance for hull forms and rudder designs for course-changing ability. However, the original hull form showed superior turning performance. Among five rudders with varying aspect ratios and shapes, the rudder with 5.5% aspect ratio had the best turning performance. Regarding the rudder design for fishing vessels, NACA airfoil was employed, and a rudder aspect ratio of 5.5% based on the immersed hull side area is recommended.

• Proceedings of KOSOMES biannual meeting
• /
• 2002.10a
• /
• pp.111-124
• /
• 2002

Ship manoeuvring simulator has been widely utilized for training mariners, for assessing safety, for developing harbour and port, and for designing ships. We discuss a ship manoeuvring simulator which has been newly developed by Korea Maritime University. The simulator consists of simulator bridge and control console. All the computers used in the simulator are connected with one another by UDP or TCP network system. All the instruments are connected with interface computer by signal line which is controlled by RS232 communication protocol, or by voltage controlled A/D board. Next the mathematical model of ship manoeuvring motion in harbour areas, and ship and terrain modeling technique are also briefly discussed. Finally using the simulator an experiment of distance cognition and a simulation example of berthing/deberthing manoeuvre are shown.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.123-126
• /
• 2003

In the present paper, the analysis is on the safe navigation between ships moving each other in restricted waterways under the external force, such as wind or current The numerical simulation of manoeuvring motion was carried out to propose an appropriate safe speed and distance between ships, which is required to avoid marine disasters from the viewpoint of marine safety. From the inspection q this investigation, it indicates the following result In case of proximal navigation between ships under the wind and current, the low-speed vessel is potentially hazardous because the rudder force if low-speed vessel needed for steady-state course-keeping is not sufficient, compared to the high-speed vessel The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.129-145
• /
• 2020

The article presents a systematic approach to design of marine navigation channels parameters resulting from manoeuvring and operational safety. Relations between the parameters of waterway system elements and the conditions of safe ship operation have been determined and the objective function of waterway parameters' optimization problems has been minimized with respect to variables of construction and operation costs. These costs have been functionally associated to variables of channel width at the bottom and fairway depth. The method of fairway's width computation at specified safe depth at the preliminary and detailed stages of waterway design has been proposed. The results of this method application have been illustrated with two examples: 1. The modernization of Szczecin-Swinoujscie fairway aimed at accepting vessels of 60,000 DWT capacity. 2. Construction of an approach channel leading to a newly built container terminal in Swinoujscie harbour (Poland), handling ocean-going container ships of 20,000 TEU capacity.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.441-456
• /
• 2007

The purpose of this study was to obtain an objective conclusion of safety assessment and to suggest proper countermeasures for the fishing vessels' entering or leaving the port of Gamcheon, in where the pier No. 4 for the fishing vessels will be newly opened soon. 20 times of the manoeuvring simulation were performed respectively onto entering and leaving the port of Gamcheon with the various conditions in weather and current, and then each of result was carefully analyzed. In spite of some increasing demand of entering the port in future, the safety will not be largely worse if the suggestion will be taken.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.639-643
• /
• 2003

The emphasis is put on the detailed knowledge on manoeuvring characteristic for the safe navigation while avoiding terrible collision between ships and on the guideline to the design and operation of the ship-waterway system The numerical simulation of manoeuvring motion was carried out parametrically for different ship types, ship-velocity ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference (hereafter, $U_2$/$U_1$ ) between two ships were considered as 0.6, 1.2, 1.5. From the inspection of this investigation, it indicates the following result. Considering the interaction force only as parameter, the lateral distance between ships is necessarily required for the ship-velocity ratio of 1.2, compared to the cases of 0.6 and 1.5 regardless of the ship types. Furthermore, regardless of the ship-velocity ratio, an overtaking and overtaken vessel can be manoeuvred safely without deviating from the original course under the following conditions: the lateral distance between two vessels is approximately kept at 0.5 times of ship-length and 5 through 10. degrees of range in maximum rudder angle. The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.4
• /
• pp.27-39
• /
• 1991

One practical method has already been proposed for predicting the characteristics of ship manoeuvring motions at relatively high advance speed [19]. Howeverf, this method can hardly be applied to motions of ships in starting, stopping, backing and slow steaming conditions, even though such extensive motions are of vital importance from a safety point of view particularly in harbour areas. The method presented here aims at predicting the characteristics of ship manoeuvring at low advance speed, which covers starting, stopping, backing and slow steaming conditions. The force mathematical models at large angles of incidence to the hull as well as under the wide range of propeller operations are formulated. Simulations of various manoeuvres at low advance speed are carried out for two types of merchant ship, I.e. a LNGC and a VLCC. Comparisons between simulations and corresponding full-scale measurements [10], [15] or free-running model tests [6],[10] provide a first verification of the proposed mathematical models.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1998

This paper deals with PC-based ship handling simulator, which is now widely utilized not only for total assessment of safety in harbour area but also for training purpose. The suitable mathematical model for low advance speed manoeuvre is treated with the effects of current, wind, wave, tug force and water depth. We adopt 3 dimensional graphic technique for perspective representation of relative ship motion. Some graphical panels on the screen are devised for data input/output or ship manoeuvring information. We show the real time simulation of berthing menoeuvre applied to Pusan harbour as an example.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.615-620
• /
• 2000

Manoeuvrability of ships has been receiving a great deal of attention both concerning navigation safety and the prediction of ship manoeuvring characteristics, especially at the preliminary design stage. Recently, in order to improve manoeuvrability of ships, High-lift devices could be applied to design of rudder at design stage. Now, among the them, we carried out the flow visualization and investigation of flow field around a flapped rudder(trailing-edge flap). A trailing-edge flap is simply a portion of the trailing-edge section of airfoil that is hinged and which can be deflected upward or downward. Flow visualization results of flap defection shown as follow Photos including main body and flap defection.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.156-163
• /
• 2006

The accuracy of estimates of hydrodynamic coefficients can be increased by using sensitivity-maximizing inputs. In this study, sensitivity-maximizing actuator commands of a submersible, which are sequences of bang-bang type commands, were obtained using Genetic Algorithm (GA) optimization technique. By comparing the total sensitivity values, deduced actuator inputs were found to be superior to the other sea trials. Based on the sensitivity distribution of conventional sea trials and sensitivity distribution results through deduced input scenario a review of submersibles' manoeuvring equations of motion was conducted .