• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.509-517
• /
• 2010

Statistical distribution of annual maximum rainfall intensity of 18 cities in Korea was analyzed and applied to the reliability model which can calculate the probability of performance failure of storm sewer. After the analysis, it was found that distribution of annual maximum rainfall intensity of 18 cities in Korea is well matched with Gumbel distribution. Rational equation was used to estimate the load and Manning's equation was used to estimate the capacity in reliability function to calculate the probability of performance failure of storm sewer. Reliability analysis was performed by developed model applying to the real storm sewer. It was found that probability of performance failure is abruptly increased if the diameter is smaller than certain size. Therefore, cleaning the inside of storm sewer to maintain the original diameter can be one of the best ways to reduce the probability of performance failure. In the present study, probability of performance failure according to accumulation of debris in storm sewer was calculated. It was found that increasing the amount of debris seriously decrease the capacity of storm sewer and significantly increase the probability of performance failure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.35-35
• /
• 2012

Most grid-based distributed hydrologic models are complex in terms of data requirements, parameter estimation and computational demand. To address these issues, a simple grid-based hydrologic model is developed in a geographic information system (GIS) environment using storage-release concept. The model is named GIS Storage Release Model (GIS-StoRM). The storage-release concept uses the travel time within each cell to compute howmuch water is stored or released to the watershed outlet at each time step. The travel time within each cell is computed by combining the kinematic wave equation with Manning's equation. The input to GIS-StoRM includes geospatial datasets such as radar rainfall data (NEXRAD), land use and digital elevation model (DEM). The structural framework for GIS-StoRM is developed by exploiting geographic features in GIS as hydrologic modeling objects, which store and process geospatial and temporal information for hydrologic modeling. Hydrologic modeling objects developed in this study handle time series, raster and vector data within GIS to: (i) exchange input-output between modeling objects, (ii) extract parameters from GIS data; and (iii) simulate hydrologic processes. Conceptual and structural framework of GIS StoRM including its application to Pleasant Creek watershed in Indiana will be presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.110-116
• /
• 2003

A catchment modelling system is the summation of the numerous hydrologic, hydraulic and other process models necessary to simulate the response of a catchment to a storm event. Differences between the recorded catchment response and that predicted by a catchment modelling system can arise from structural errors within the catchment modelling system, evaluation errors in the control parameters, or measurement errors in the recorded data being used to assess the reliability of the evaluation of the control parameters. Presented herein is an investigation of the potential measurement errors within the recorded information, which was considered to occur from instrument error in the ultra sonic flow monitor. This investigation was undertaken using three available rating curves at the Musgrave Avenue Stormwater System in Centennial Park, Sydney, developed by Abustan (1997), Water Board (1994), and using Manning's equation.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1101-1106
• /
• 2004

Rainfall induced landslides are disasters causing sever damage on the human life and the infrastructures. In this paper, a simplified procedure to evaluate the slope stability problems induced by rainfall by modifying the Iverson's pressure head dispersion model. The proposed approach extends the applicability of the Iverson's model in to the cases of higher rainfall intensity than the permeability of the soil by incorporating the existence of overland flow. In addition, the Manning equation is applied to calculated the depth of overland flow. From the calculated depth of overland flow, shear stress acting on the surface is included for the driving component triggering the landslides. From the analysis of a case study, the long term rainfall alters the stability of slope.

• Water for future
• /
• v.15 no.3
• /
• pp.37-47
• /
• 1982

In the past, the design flow of the urban storm drainage systems has been used largely on a basis of empirical and experience, and the rational formula one of empirical method has been widely used for our country, as well as world wide. But the empirical method has insufficient factor because minimal consideration is given to the relationship of the parameters in the equation to the processes being considered, and considerable use of experience and judgment in setting values to the coefficients in the equation is made. The postcomputer era of hydrology has brought an acceleration development of mathematical methods, thus mathematical models are methods which will greatly increase our understanding in hydrology. On this study, a simple mathematical model of urban presented by British Road Research Laboratory is tested on urban watersheds in Ju An Ju Gong Apartment. The basin is located in Kan Seog Dong, Inchon. The model produces a runoff hydrograph by applying rain all to only the directly connected impervious area of the basin. To apply this model the basin is divided into contributing areas or subbasins. With this information the time area for contributing is derived. The rainfall hyetograph to design storm for the basin flow has been obtained by determination of total rainfall and the temporal distribution of that rainfall determined on the basis of Huff's method form historical rainfall data of the basin. The inflows from several subbaisns are successively routed down the network of reaches from the upstream end to the outlet. A simple storage routing technique is used which involves the use of the Manning equation to compute the stage discharge curve for the cross-section in question. To apply the model to a basin, the pattern of impervious areas must be known in detail, as well as the slopes and sizes of all surface and subsurface drains.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.135-139
• /
• 2012

하천에서의 정확한 유량 산정은 하천의 설계 및 운영 유지에 매우 중요한 요소이다. 현재 하천의 유량 생산은 수위-유량관계곡선을 통하여 이루어지고 있다. 수위-유량관계곡선법은 측정된 수위와 유량자료의 관계를 바탕으로 홍수기 때의 유량을 회귀 추정법으로 예측하여 사용하는 방법이다. 비교적 간편하게, 특히 측정이 어려운 홍수기 때의 유량을 예측하여 사용할 수 있다는 장점을 가지고 있지만 수위와 유량만의 관계를 사용하므로 하천의 수리학적 특성을 반영하기 곤란하기 때문에 기본적으로 개선되어야 할 사항이 있다. 따라서, 본 연구에서는 하천유량을 예측하는 새로운 방법론의 하나로 KSCE에 기 게재된 Choo 등(2011)의 방법에 따라, 개수로에서 널리 사용되어 오고 있는 Manning식과 Chezy식을 활용하여 하천의 전체적인 특성을 잘 반영하는 특성조도계수 n과 특성Chezy계수 C를 사용하여 하천의 유량을 예측하였다. 실험실 직선수로에서 측정된 정류 자료와 객관성 있는 해외 하천 유량측정 자료를 사용하여 증명하였고 결정계수 0.8 정도 수준의 높은 정확성을 보여주는 성과를 나타내었다. 따라서 본 연구결과를 통해 하천의 수리학적 특성을 반영하면서도 간단하게 유량을 예측할 수 있는 방법으로 실무에서 간편하게 활용될 수 있을 것으로 기대한다.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.465-474
• /
• 2009

To measure the amount of nonpoint source pollution, some efforts are tried to utilize satellite imagery. But, as the factors for water models do not relate with the landcover categories for satellite imagery, satellite imagery are adapted to roughly classified thematic map or used only for the image interpretation. The purpose of this study is to establish the landcover categories of satellite imagery to relate with the water models. To establish the categories of the landcover for the water models, it was investigated to get main factors of water flow models for the nonpoint source pollution and to review the existing study and the classification system. For this result, it was convinced that the basic unit on the nonpoint source pollution, landcover coefficients of SCS Curve Number, the crop factor of Universal Soil Loss Equation, Manning's roughness coefficients are the useful parameters to extract information from the satellite imagery. After the setup the categories for the landcover classification, it was finally defined from the consultation of the water model specialist. Woopo wetland watershed was selected to the study area because it is a representative wetland in Korea and needs the management system for nonpoint source pollution. There were used Landsat ETM Plus and SPOT-5 satellite imagery to assess the result of the image classification.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.135-146
• /
• 2007

FLDWAV model was modified such that it can adequately simulate the effect of Jamsil and Singok submerged weirs in the main reach of the Han River. The enhanced model combines weir-type discharge equations for overflow at fixed weir and Manning equation for fluvial-type flow at the movable weir. Equations for weir overflow include those for submerged weir flow and free overflow. Gates of the movable weir may be open or closed for the simulation. In order to test the simulation capabilities, the enhanced model was applied for various flow conditions at submerged weirs. Backwater effect due to Jamsil and Singok submerged weirs were well simulated. Simulations were carried out for spring and neap tides extracted from artificial tide generated by combining $M_2\;and\;S_2$ tidal constituents. Simulation results cleared indicated that tidal effect extends further upstream as the flood discharge decreases. Low flow simulation capabilities of the enhanced model was tested. Discontinuities of water surface elevation due to the submerged weirs were successively simulated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.635-642
• /
• 2008

The influence of unsubmerged resistance bodies in a channel turbulence flow on energy loss was investigated by hydraulic experiments. Square-shaped multi-piers were used for unsubmerged structure or rigid vegetation in an open channel. In experimental channel flows multi-piers were arranged in double or single row along the channel direction, and mean-concept uniform elevations were attained and measured with a set of discharges and channel slopes. Applying the experimental results to the Manning equation, the equivalent resistance coefficient n, which implicates flow resistance and energy loss due to bottom friction as well as drag, was evaluated with varying the interval of piers and the uniform water depth. And the experimentally evaluated n values were compared with the semi-theoretical formula of the equivalent resistance coefficient derived from momentum analysis including a drag interaction coefficient. From the comparisons it was found that the interaction effect of piers on flow resistance was significant for the overall energy losses in a channel flow. The n values decrease when the interval of piers in flow-direction is less than about 2.2 times of the pier width. And it was also found that the n values increase with the 2/3 power of water depth in the theoretical formula, since the drag interaction coefficient was found to be mostly dependent on the interval of piers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1019-1023
• /
• 2006

The slope information based on DEM is very useful for urban planning, landscape, road design and water resource areas such as rainfall-runoff and soil erosion estimation. The resolution of slope, which is from DEM, can be variously decided by an application fields and the kinds of modeling method. In particular, the more decreased resolution makes the more decreased slope value because of the increased horizontal distance. This study presents slope evaluation method by aggregation method based on discharge and Manning's velocity equation to advance the loss of slope information in according to the resolution, and then applied it to calculate topographic factors of soil erosion model. As a result, conventional method shows 34.8% errors but aggregation method shows 12.6% errors. This study selected up-, middle-, and downstream region in watershed and analyzed the capability of aggregation method in order to estimate the influence of topographic characteristics. As a result of estimation, aggregation method shows more advanced results than conventional method. Therefore, the slope evaluation method by aggregation method can improve efficiently the loss of slope information in according to the variation of resolution in water resource area such as rainfall-runoff model.