• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.1
• /
• pp.77-84
• /
• 1998

Ureteral obstruction causes increase in renal blood flow (RBF) and partial impairment of the autoregulation of RBF. Although increased renal prostaglandin production is responsible for the former, it is not clear whether or not it is also responsible for the latter. Therefore, we investigated the role which prostaglandins play in the autoregulation of RBF during an ureteral pressure elevation (40 $cmH_2O$). Since the major mechanism of RBF autoregulation is the tubuloglomerular feedback, studying the interaction between ureteral pressure and RBF autoregulation may reveal the role of prostaglandin in tubuloglomerular feedback. To pursue the purpose, six anesthetized dogs were prepared for the measurements of RBF, mean sytemic and renal arterial pressure (RAP) and the manipulation of ureteral pressure. The autoregulation curves were determined during both control and elevation of the ureteral pressure, before and after the pretreatment with indomethacin, a cyclooxygenase inhibitor. The desired ureteral pressure was achieved by vertically elevating the water-filled reservoir connected to the ureteral catheter to 40 cm above the kidney level. In response to the elevation of the ureteral pressure, RBF increased from $170{\pm}8 ml{\cdot}min^{-1}\;to\;189{\pm}8$, and the systemic arterial pressure didn't change significantly. During spontaneous urine flow, RBF autoregulation was abolished when RAP was reduced to $59{\pm}3$ mmHg. On the other hand, during the ureteral pressure elevation, the autoregulation curves shifted upward and rightward from control, and the pressure when RBF autoregulation was abolished was $74{\pm}3$ mmHg. The pretreatment of the dogs with indomethacin failed to affect the lower limit of RBF autoregulaion during both control ($63{\pm}5$ mmHg) and the elevated ureteral pressure ($77{\pm}5$ mmHg). Since RBF failed to increase in response to the elevated ureteral pressure, RBF autoregulation curves obtained during the elevated ureteral pressure shifted only rightward from indomethacin control. The results indicate that the increased intrarenal level of prostaglandin or prostaglandin-induced vasodilation does not appear to bear any relation to the reduction in the autoregulatory capacity during partial ureteral obstruction. It seems that the partial impairment of the autoregulation during acute ureteral obstruction is due to the consumption of tubuloglomerular feedback mechanism at spontaneous RAP and that prostaglandin is neither mediator nor effector of tubuloglomerular feedback mechanism.

• Korean Journal of Cognitive Science
• /
• v.26 no.1
• /
• pp.27-51
• /
• 2015

The present study tested the effect of a top-down influence on recalling the colors of Stroop words. Participants remembered the colors of 1, 2, 3 or 6 Stroop words. After 1 second of a memory delay, they were asked to recall the color of a cued Stroop word by selecting out its corresponding color on a color-wheel stimulus. The correct recall was defined when the participants chose a color that was within ${\pm}45^{\circ}$ from the exact location of Stroop word's color on the color-wheel. Otherwise, the recall was defined as incorrect. The analyses of the frequency distribution of the participants' responses in the error trials showed that the probability of choosing the color-name of the target Stroop word was higher than the probability of other five color-names on the color-wheel. Further analyses showed that increasing the number of Stroop words to manipulate memory load did not affect the probability of the Stroop interference. These results indicate that the top-down interference by Stroop manipulation may induce systematic distortion of the stored representation in visual working memory.

• Korean Journal of Cognitive Science
• /
• v.18 no.2
• /
• pp.113-138
• /
• 2007

The effects of schema on accurate and false memories of items in a scene were investigated in two experiments: Recognition of items in a scene was tested immediately in Experiment 1 and three days later in Experiment 2. In both experiments, the following three variables were manipulated: Exposure time (250ms or 10000ms), picture mode (completed pictures or scrambled pictures), and manipulation mode (missing item or substituted item). Experiment 1 had yielded three important results: First, although accurate memory for presented items got increased when the exposure time was longer, false memory of the critical lures was not changed. Second, false memory of critical lures in the missing condition, where there was not any conflict between verbatim information and gist information, was higher than that of the substituted condition, where verbatim information of the item that replaced the lure was in conflict with the gist information. Third, accurate memory for atypical items in the substituted rendition, which had replaced the critical lures and in conflict with the schema, was higher than that in the missing condition. In Experiment 2, recognition test were administered 72 hours after the participants saw the picture. The three effects mentioned in Experiment 1 had disappeared in Experiment 2. The results of Experiment 2 might be due to the selective weakening of verbatim information compared to the persistence of the gist (or schematic) information. The results of Experiments 1 and 2 showed that false memory of critical lures is more persistent than the accurate memory of non-critical information. Theoretical implications of the results were considered in terms of the function of the verbatim and gist information.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.1 no.1
• /
• pp.151-170
• /
• 1976

There are many cases of production processes which intermittently produce several different kinds of products for stock through one set of physical facility. In this case, an important question is what size of production run should be prduced once we do set-up for a product in order to minimize the total cost, that is, the sum of the set-up, carrying, and stock-out costs. This problem is used to be called scheduling of multiple products through a single facility in the production management field. Despite the very common occurrence of this type of production process, no one has yet devised a method for determining the optimal production schedule. The purpose of this study is to develop quantitative analytical models which can be used practically and give us rational production schedules. The study is to show improved models with application to a can-manufacturing plant. In this thesis the economic production quantity (EPQ) model was used as a basic model to develop quantitative analytical models for this scheduling problem and two cases, one with stock-out cost, the other without stock-out cost, were taken into consideration. The first analytical model was developed for the scheduling of products through a single facility. In this model we calculate No, the optimal number of production runs per year, minimizing the total annual cost above all. Next we calculate No$_{i}$ is significantly different from No, some manipulation of the schedule can be made by trial and error in order to try to fit the product into the basic (No schedule either more or less frequently as dictated by) No$_{i}$, But this trial and error schedule is thought of inefficient. The second analytical model was developed by reinterpretation by reinterpretation of the calculating process of the economic production quantity model. In this model we obtained two relationships, one of which is the relationship between optimal number of set-ups for the ith item and optimal total number of set-ups, the other is the relationship between optimal average inventory investment for the ith item and optimal total average inventory investment. From these relationships we can determine how much average inventory investment per year would be required if a rational policy based on m No set-ups per year for m products were followed and, alternatively, how many set-ups per year would be required if a rational policy were followed which required an established total average inventory inventory investment. We also learned the relationship between the number of set-ups and the average inventory investment takes the form of a hyperbola. But, there is no reason to say that the first analytical model is superior to the second analytical model. It can be said that the first model is useful for a basic production schedule. On the other hand, the second model is efficient to get an improved production schedule, in a sense of reducing the total cost. Another merit of the second model is that, unlike the first model where we have to know all the inventory costs for each product, we can obtain an improved production schedule with unknown inventory costs. The application of these quantitative analytical models to PoHang can-manufacturing plants shows this point.int.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.409-420
• /
• 2017

The amount of ventilation required in making the tunnel ventilation plan is an important factor for determining the capacity of the ventilation system. The amount of pollutant emission for each type of vehicle (basic emission amount for the design of ventilation volume) for estimating the required ventilation amount is based on the 'Standard for Allowing the Emission for the car manufacturing', proposed by Ministry of Environment. However, in 2013, the Ministry of Environment announced the 'Regulations on the calculation method of total emissions from vehicles' as a regulation for calculating the pollutants emitted from vehicles. In this regulation, there are the 'Emission factors for each type of vehicle'. Therefore, it is necessary to review the application of the Regulation to the estimation of the required ventilation volume for the road tunnel. In this study, the influence of the strengthened emission regulation in 2015 caused by the case of manipulation of emission volume for the diesel vehicle on the calculation of the required ventilation volume in the road tunnel has been checked. In addition, in this study, the required ventilation volume calculated according to the Standard for Allowing the Emission for the car manufacturing revised by Ministry of Environment and "Emission factors for each type of vehicle" and that calculated according to the EURO emission standard were compared for analysis. This study has implications that it provides the basic design data for calculating the reasonable ventilation capacity of the ventilation system based on the ground for calculating the required ventilation volume.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.92-97
• /
• 2012

Antimicrobial peptides (AMPs) are important components of living organisms acting against Gram-negative and Gram-positive bacterial and fungal pathogens. Cathelicidin human peptides have a variety of biological activities that can be used in clinical applications. AMPs are not produced naturally in large quantities, and chemical synthesis is also economically impractical, especially for long peptides. Therefore, as an alternative, heterologous expression of AMPs by recombinant techniques has been studied as a means to reduce production costs. E. coli is an excellent host for the expression of AMPs, as well as other recombinant proteins, because of the low cost involved and its easy manipulation. However, overexpression of AMPs in E. coli has been shown to cause difficulties resulting from the toxicity of the subsequently produced AMPs. Therefore, fusion expression was theorized to be a solution to this problem. In this study, AMPs were expressed as fused proteins with the glutathione S-transferase (GST) binding protein to protect against the toxicity of AMPs when expressed in E. coli. The LL37, and hybrid gaegurin and LL37 (GGN4(1-16)-LL37(17-32), which we designated as GL32, peptides were expressed as GST-fusion proteins in E. coli and the fusion proteins were then purified by affinity columns. The purified peptides were obtained by removal of GST and were confirmed by western blot analysis. The purified antimicrobial peptides then demonstrated antimicrobial activities against Gram-negative and Gram-positive bacterial strains.

• Reproductive and Developmental Biology
• /
• v.33 no.1
• /
• pp.25-28
• /
• 2009

This study was carried out to investigate the general characteristics, such as volume, pH, sperm motility and sperm concentration of the semen collected from Beagle dogs (age $24{\sim}48$ months, weight $10{\sim}15\;kg$) by using the method of digital manipulation of the penis, and the effect of preservation temperature and time on motility of fresh semen. Multiple ejaculates were collected from 4 male Beagles. The average volume, pH, motility and sperm concentration of the second fraction (contained with small volume of the third fraction) per ejaculation were $2.94{\pm}0.24(SD)\;ml$, $6.43{\pm}0.42(SD)$, $97.04{\pm}3.50(SD)%$ and $1.67{\pm}0.23(SD){\times}10^8\;cells/ml$, respectively. Average semen volume per ejaculate, semen pH, sperm motility and sperm concentration of the first fraction from the ejaculate were $1.24{\pm}0.20(SD)\;ml$, $6.03{\pm}0.26(SD)$, $1l.30{\pm}4.02(SD)%$ and $7.25{\pm}1.02(SD){\times}10^5\;cells/ml$. Those of second fraction were $2.52{\pm}0.32(SD)\;ml$, $6.32{\pm}0.31(SD)$, $96.25{\pm}3.52(SD)%$ and $2.35{\pm}0.35(SD){\times}10^8\;cells/ml$. Those of third fraction were $2.71{\pm}0.27\;(SD)\;ml$, $6.52{\pm}0.20(SD)$, $95.65{\pm}2.78(SD)%$ and $5.72{\pm}0.29(SD){\times}10^7\;cells/ml$. Motility of semen was higher at $17^{\circ}C$ preservation temperature than $5^{\circ}C$ or $36^{\circ}C$ during preservation period. When preservation temperature was $17^{\circ}C$, motility was $96.54{\pm}2.05(SD)%$ at 1 h, $90.20{\pm}3.90(SD)%$ at 6 h, $89.05{\pm}2.01(SD)%$ at 12 h, $78.21{\pm}3.50(SD)%$ at 18 h, $45.24{\pm}6.25\;(SD)%$ at 24 h and $30.75{\pm}17.24(SD)%$ at 30 h, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.161-166
• /
• 2008

To determine if body weight change is directly related to altered leptin and neuropeptide Y (NPY) gene expression, we assessed adipose tissue weight, percent body fat, leptin and NPY mRNA levels and serum leptin concentration in pigs at weights of 1, 20, 40, 60, and 90 kg. The results indicated that the weight of adipose tissues and the percent body fat of pigs significantly increased and correlated with body weight (BW) from 1 to 90 kg (p<0.01). Serum leptin concentrations and leptin mRNA levels in omental adipose tissue (OAT) increased from 1 to 60 kg, and then decreased from 60 to 90 kg. At 60 kg, the serum leptin concentration and leptin mRNA level significantly increased by 33.5% (p<0.01) and 98.2% (p<0.01), respectively, as compared with the levels at 1 kg. At 60 kg, the amount of leptin mRNA in subcutaneous adipose tissue (SAT) was significantly higher than that of 1 and 40 kg animals (p<0.05). NPY gene expression in the hypothalamus also changed with BW and at 60 kg the NPY mRNA level significantly decreased by 54.0% (p< 0.05) as compared with that in 1 kg. Leptin mRNA in OAT was correlated with serum leptin concentrations (r = 0.98, p<0.01), body weight (r = 0.82, p<0.05) and percent body fat (r = 0.81, p<0.05). This is the first report of the developmental expression of leptin in porcine OAT, peritoneal adipose tissue (PAT) and SAT, and proves that the expression of leptin in OAT could reflect the levels of circulating leptin. These results provide some information for nutritional manipulation of leptin secretion which could lead to practical methods of controlling appetite and growth in farm animals, thereby regulating and improving efficiency of lean meat production and meat production quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1107-1112
• /
• 2009

The separation of X and Y chromosome-bearing sperm is of use in many aspects of livestock maintenance. In this study, we sought to determine the difference in DNA content between X- and Y-bearing sperm, separate sperm into X- and Y-enriched pools, and assess the efficacy of sorting. Sperm collected from Duroc and miniature pigs were stained with 20.8 $\mu{M}$ Hoechst 33342 and analyzed using a high-speed cell sorter. Measurement of the fluorescence intensity of stained sperm nuclei revealed that the X-bearing sperm of Duroc and miniature pigs respectively contain 2.75% and 2.88% more DNA than Y-bearing sperm. In total, 50.18% of the sperm were assigned to the X-sorted sample and 49.82% was assigned to the Y-sorted sample for Duroc pigs. For miniature pigs, the Xsorted sample represented 50.19% of the population and the Y-sorted represented 49.81% of the population. Duplex PCR was used to evaluate accuracy of sorting. A fast and reliable method for porcine sexing was developed through amplification of the sex-determining region of the Y chromosome gene (SRY). Oligonucleotide primers were designed to amplify the conserved porcine SRY high motility group (HMG) box sequence motif. We found that the primer pair designed in this study was 1.46 times more specific than previously reported primers. Thus, this study shows that the present method can be applied in porcine breeding programs to facilitate manipulation of the sex ratio of offspring and to achieve precise sexing of porcine offspring by amplification of the HMG box of the SRY gene.

• The Korean Journal of Pain
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2010

Background: Recent studies indicate that reactive oxygen species (ROS) are involved in persistent pain, including neuropathic and inflammatory pain. Since the data suggest that ROS are involved in central sensitization, the present study examines the levels of activated N-methyl-D-aspartate (NMDA) receptors in the dorsal horn after an exogenous supply of three antioxidants in rats with chronic post-ischemia pain (CPIP). This serves as an animal model of complex regional pain syndrome type-I induced by hindpaw ischemia/reperfusion injury. Methods: The application of tight-fitting O-rings for a period of three hours produced CPIP in male Sprague-Dawley rats. Allopurinol 4 mg/kg, allopurinol 40 mg/kg, superoxide dismutase (SOD) 4,000 U/kg, N-nitro-L-arginine methyl ester (L-NAME) 10 mg/kg and SOD 4,000 U/kg plus L-NAME 10 mg/kg were administered intraperitoneally just after O-ring application and on the first and second days after reperfusion. Mechanical allodynia was measured, and activation of the NMDA receptor subunit 1 (pNR1) of the lumbar spinal cord (L4-L6) was analyzed by the Western blot three days after reperfusion. Results: Allopurinol reduced mechanical allodynia and attenuated the enhancement of spinal pNR1 expression in CPIP rats. SOD and L-NAME also blocked spinal pNR1 in accordance with the reduced mechanical allodynia in rats with CPIP. Conclusions: The present data suggest the contribution of superoxide, produced via xanthine oxidase, and the participation of superoxide and nitric oxide as a precursor of peroxynitrite in NMDA mediated central sensitization. Finally, the findings support a therapeutic potential for the manipulation of superoxide and nitric oxide in ischemia/reperfusion related pain conditions.