• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.901-911
• /
• 2015

Many studies tried to develop a 3D display based stereo test as a substitute for the conventional stereo test. Although many 3D monitor based stereo tests have various advantages over the conventional stereo tests with printed stimuli, they have a crucial limitation in manipulating disparity. The least value for disparity manipulation is one pixel, which is too big to screen the normal stereo acuity in pc environment with a short viewing distance. In this explorative study, a Gabor image was employed as a test stimulus, because its position can be manipulated by changing its phase information, which allows sub-pixel manipulation for disparity. Instead of employing the methods of the conventional stereo tests where measurement was made only once for each of a wide range of disparity values, 10 replications were administrated for each of 6 disparity levels. The results from the test using Gabor images were compared with those using random dot stimulus because the latter stimulus was exactly the same as that of the conventional stereo test. The correlation coefficient between two tests was found to be moderate. After one month later, the whole test was repeated in the same settings. The correlation coefficient between test and retest results from Gabor images was found to be as high as that from a random dot stimulus, implying high test-retest reliability. These results suggest that a Gabor stimulus could be used as a test stimulus for the valid and reliable stereo test, even in the limited condition, such as 3D environment with a short viewing distance and a condition for evaluating the stereo acuity very precisely.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.2
• /
• pp.55-66
• /
• 2007

There has been increasing concerns regarding marine mineral resources as the land energy resources has been depleting from worldwide energy crisis. Also, all the coastal countries around the world are getting into the high competition as EEZ implemented to widen each country's marine autonomy. Especially, the adoption of EEZ in UN's marine regulation agreement at the January of 1996 has aggravated conflicts among coastal countries and eventually resulted in critical agenda to determine the boundaries of EEZ among such countries. It is imperative for us to have negotiation with neighboring countries to determine the boundaries of EEZ. For the preparation of such negotiation, it is essential to have data such as mineral distribution, deep-sea geology, related agreement and marine laws, etc. Therefore, this study mainly concentrates on analyzing existing data of resources exploration and establishing standards for each type of data and manipulating data based on such standards, thereby building a database for more efficient management of EEZ data from marine resources survey. MRIS has also been developed to diversely analyze and visualize graphic and attribute data considering data usage and inter-relationship in the database. This system can provide various spatial analysis and spatial searching techniques to enable easier comparison of cost-benefit analysis and data provision of any area in EEZ thereby facilitating major policy making. In addition, the system can support sustainable management of marine resources of EEZ regions and data supply for systematic management of national marine resources. Furthermore, this will be very useful for negotiating with neighboring countries to determine EEZ boundaries to lead more favorable results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.463-470
• /
• 1995

An experiment was conducted to evaluate the effects of chromium picolinate on growth performance, nutrient utilizability, carcass composition, serum traits and in vitro protein synthesis of 3 day old Arbor Acres broiler chickens when dietary crude protein levels were varying in diets. Six replicates of eight chicks each (average initial weitht = 59.4 g) were randomly assigned to three levels (low, medium, high) of dietary crude protein at two levels of chromium (0, 200 ppb Cr/kg diet) as chromium picolinate. Six chicks/treatment were randomly chosen for analyses of carcass composition, six additional chicks/treatment were randomly chosen for analyses of serum components, and a chick/treatment was chosen for in vitro culture of liver tissue. Chromium picolinate did not affect feed intake, protein and fat utilizability, regradless of dietary crude protein level. But feed/gain ratio were more improved in groups fed the low protein diets added with chromium picolinate compared with groups fed the medium and high protein diets with chromium picolinate. Carcass fat tended to decrease whereas carcass protein tended to increase when added with chromium picolinate. Broilers fed diets with chromium picolinate exhibited lower serum triglyceride and nonesterified fatty acid concentrations than those fed without chromium picolinate (p < 0.05). Both secreted and retained proteins in cultured acinar cell were higher in groups fed diets with chromium picolinate than those fed diets without chromium picolinate (p < 0.05). It could be suggested that chromium picolinate was effective in improving weight gain and nutrient utilizability when dietary crude protein was low (p < 0.05), and also effective in manipulating carcass fat when dietary crude protein level was high (p < 0.05).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.50-64
• /
• 2013

In clustered sensor networks, since a CH (Cluster Head) collects data from its members and delivers the collected data to the sink, it is very important to prevent compromised nodes from joining a CH election and manipulating and fabricating the election result. In order to protect CH elections from compromised nodes, unpredictability, non-manipulability, and agreement property should be guaranteed in CH elections. However, existing CH election schemes cannot prevent intelligent compromised nodes from skilfully violating those properties via their cooperation. In this paper, we propose a scheme which protects the CH election process by detecting intelligent compromised nodes and excluding them. For every CH election round, each member gives a direct trust value to other members according to their behavior. Then a real reputation value is given to each member by combining the direct trust value and indirect trust values provided by other members. Then, each node evaluates the real reputation values of members in its cluster and excludes some untrustable nodes from CH candidates. The scheme greatly improves the non-manipulability and agreement property of CH election results compared to other rival schemes. Furthermore, the scheme preserves the high non-manipulability and the high agreement property even in an environment where message losses can happen.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2010

Unlike the previous studies which have focused on 2-dimensional urban characteristics, this paper presents statistical models explaining urban heat island(UHI) effect by 3-dimensional urban morphologic information and addresses its policy implications. 3~dimensional informations of Columbus, Ohio arc captured from LiDAR data and building boundary informations are extracted from a building digital map, Finally NDV[ and temperature data are calculated by manipulating band 3, band 4, and thermal hand of LandSat images. Through complicated data processing, 6 independent variables(building surface area, building volume, height to width ratio, porosity, plan surface area) are introduced in simple and multiple linear regression models. The regression models are specified by Box-Tidwell method, finding the power to which the independent variable needs to raised to be in a linearity. Porosity, NDVI, and building surface area are carefully chosen as explanatory variables in the final multiple regression model, which explaining about 57% of the variability in temperatures. On reducing UHI, various implications of the results give guidelines to policy-making in open space, roof garden, and vertical garden management.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.33-37
• /
• 2010

We performed time-domain terahertz (THz) spectroscopy to determine optical constants of highly conductive carbon nanotube (CNT) films. The CNT films have been fabricated on a flexible plastic substrate by using spin-coating or vacuum filtration. We found that the transmission of THz waves can be controlled by manipulating the thickness of the films and by post-treatments. From amplitude and phase information of the transmitted THz waves, we obtain optical constants such as refractive indices and dielectric constants of the CNT films. The frequency dependent dielectric constants show good metallic behaviors, relevant to the Drude free electron models with high plasma frequencies. It is also found that the dielectric constants are higher for the acid-treated films. Finally, the frequency dependent dielectric constants which are free from substrate effects have been demonstrated by using CNT films deposited on cellulose membranes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.560-567
• /
• 1991

Photosynthetic variation in field grown soybean [Glycine max (L.) Merr. cv Hodgson78］ was studied in relation to leaf anatomical variation. Variations in mesophyll morphology were accentuated by manipulating source and sink size. At R3 stage, two treatments were started: one was thinning and continu-ous debranching(6. 5 plants rather than 26 plants per m of row and remaining plants were debranched weekly), and the other was continuous partial depodding (allowing only one pod to develop at each mainstem node). Gas exchange characteristics, mesophyll cell volume and surface area per unit leaf surface, and microclimatic parameters were measured on the intact terminal leaflet at the 10th node. Observations were made 5 times with 3 to 4 day intervals starting R4 stage. Two models were used to compute leaf photosynthetic rates: one considered no effect of mesophyll morphology on photosynthesis, and the other considered potential effects of variations in mesophyll cell volume and surface area on diffusion and biochemical processes. Seventy nine percent of total photosynthetic variations observed in the experiment was explained by the latter, while 69% of the same variations was explained by the former model. By incorporating the mesophyll morphology concept, the predictability was improved by 14.6% in the field condition. Additional Index Words: photosynthesis model, leaf anatomy, Glycine max (L.) Merr., mesophyll surface area, mesophyll cell volume.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.32-32
• /
• 2017

To increase rice production, manipulating plant architecture, especially developing new high-yielding cultivars with erect leaves, is crucial in rice breeding programs. Leaf inclination angle determines the light extinction coefficient (k) of the canopy. Erect leaves increase light penetration into the canopy and enable dense plantings with a high leaf area index, thus increasing biomass production and grain yield. Because of erect leaves, the high-yielding indica rice cultivar 'Takanari' has smaller k during ripening than 'Koshihikari', a japonica cultivar with good eating quality. In our previous study, using chromosome segment substitution lines (CSSLs) derived from a cross between 'Takanari' and 'Koshihikari', we detected seven quantitative trait loci (QTLs) for leaf inclination angle on chromosomes 1 (two QTLs), 2, 3, 4, 7, and 12. In this study, we developed a near-isogenic line (NIL-3) carrying a 'Takanari' allele for increased leaf inclination angle on chromosome 3 in the 'Koshihikari' genetic background. We compared k, dry matter production, and grain yield of NIL-3 with those of 'Koshihikari' in the field from 2013 to 2016. NIL-3 had higher inclination angles of the flag, second, and third leaves at full heading and 3 (- 4) weeks after full heading and smaller k of the canopy at the ripening stage. Biomass at full heading and leaf area index at full heading and at harvest did not significantly differ between NIL-3 and 'Koshihikari'. However, biomass at harvest was significantly greater in NIL-3 than in 'Koshihikari' due to a higher net assimilation rate at the ripening stage. The photosynthetic rates of the flag and third leaves did not differ between NIL-3 and Koshihikari at ripening. Grain yield was higher in NIL-3 than 'Koshihikari'. Higher panicle number per square meter in NIL-3 contributed to the higher grain yield of NIL-3. We conclude that the QTL on chromosome 3 increases dry matter and grain production in rice by increasing leaf inclination angle.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.34-43
• /
• 1977

This study attempts to examine the performances of Myun Health Workers-the frontline workers in the Korean rural health care delivery system. The time-activity approach was mainly utilized as a measuring tool. This study was undertaken in September 1976 with 35 Myun Health Workers at the Kang Wha County. The pretested time-activity approach sheets were filled out daily for one month by those Myun Health Workers themselves. Statistical means and variances of analysis were utilized for statistical method in comparing some activities and functions converged into time distribution Findings: 1. The workers's average working hours derived in this study is 8 hours and 48 minutes per day, which takes half an hour longer than normal schedule. 2. They spend 56% working hour for direct services, in other words, the main function, 22% for supportive function, and 22% for other activities, the unrelated health services. 3. Considering the total working hours of main function, out-center activity is far more than in-center services with the ratio of 70% to 30% respectively, which proves, therefore, that the main activity of the workers is home visiting. 4. It takes 20 minutes purely for home visiting and takes 14 minutes for transportation. 5. This research also indicates that such factors as characteristics of the health workers and myun influence in shaping the structures of the worker's function and activity: a. The workers whose working site is located in myun office spend 15% among total working hours in carring out official myun activities, which is incidentally unrelated to health services, while the health subcenter have no rooms for administrative jobs for myun office. b. The workers whose office is in health subcenter contribute much time in doing main function and those working in special project distribute more time in performing supportive function. c. The types of workers are another dominant factor to influence the components of worker's functions and activities. MCH workers and MPW I spend much time for manipulating main function. d. MPW II, whose function is reorganized by special project in 2 myuns shows different pattern of time distribution compared to the TB worker orFP worker in the ordinary area. MPW II distributes their time evenly in performing MCH program, T.B. Program, F.P. program and education activity, while the unipurpose workers engage in carring out only their dominant role. e. Another variables which involve the variation of the worker's activity can be illustrated with the variables like target population, size of myun and convenience for transportation, among which the latter two are remarkable factors in determining the time for out-center service.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.49-64
• /
• 2008

Recently, many researches about making more comfortable input device based on gaze detection technology have been done in human computer interface. However, the system cost becomes high due to the complicated hardware and there is difficulty to use the gaze detection system due to the complicated user calibration procedure. In this paper, we propose a new gaze detection method based on the 2D analysis and a simple user calibration. Our method used a small USB (Universal Serial Bus) camera attached on a HMD (Head-Mounted Display), hot-mirror and IR (Infra-Red) light illuminator. Because the HMD is moved according to user's facial movement, we can implement the gaze detection system of which performance is not affected by facial movement. In addition, we apply our gaze detection system to 3D first person shooting game. From that, the gaze direction of game character is controlled by our gaze detection method and it can target the enemy character and shoot, which can increase the immersion and interest of game. Experimental results showed that the game and gaze detection system could be operated at real-time speed in one desktop computer and we could obtain the gaze detection accuracy of 0.88 degrees. In addition, we could know our gaze detection technology could replace the conventional mouse in the 3D first person shooting game.