• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.369-373
• /
• 2002

The liquid phase oxidation of p-xylene has been carried out with oxygen-enriched gas, and the manganese component was precipitated probably via over-oxidation to $Mn^{4+}$. The precipitation increased with rising oxygen concentration in the reaction gas and occurred mainly in the later part of the oxidation. The activity of the reaction decreased, and the blackening of the product and side reactions to carbon dioxide increased with the degree of precipitation. Precipitation can be decreased with the addition of metal ions, such as cerium, chromium and iron.

• 열처리공학회지
• /
• 제12권3호
• /
• pp.206-214
• /
• 1999

The effect of cooling rate on carbide precipitation during quenching of austenitic manganese steel was investigated by optical microscopy, image analyzer and numerical analysis. A computer program based on the finite difference method for analyzing heat treatment processes was developed in order to evaluate cooling rates and the possibility of carbide precipitation during quenching. The area ratio of carbide precipitated in the austenite matrix was measured by the image analyzer, and used to determine the critical point of carbide precipitation. Temperature-dependent critical cooling rates at the critical points were calculated using the present simulation program, The calculated results showed a good agreement with the experimental ones.

• 한국광물학회지
• /
• 제5권1호
• /
• pp.1-5
• /
• 1992

太白山地區의 主要 망간鑛床에서 産出하는 酸化망간 鑛物들은 一次的으로 생성된 炭酸망간 또는 珪酸망간의 表成風化作用에 依하여 生成되었다. 이들 酸化망간 鑛石의 生成에 관여된 地質作用에는 溶解作用, 酸化作用, 運搬作用, 沈澱作用, 晶出作用 및 再結晶作用 等이 있다. 그러나 箇箇의 酸化망간 鑛物 生成은 交代作用, 溶液으로부터의 晶出作用 및 固體狀態에서의 晶出, 및 再結晶作用 等에 依하여 이루어졌다. 이들 鑛物生成作用에 依하여 多樣한 名種 鑛石의 組職이 形成되었으며, 母鑛石의 鑛物組成과 風化環境에 따라 特徵的인 鑛物 및 鑛物共生關係가 形成되었다. 그러나 一般的으로 風化殘留鑛床 중의 酸化망간 鑛物들은 $Mn^{2+}{\to}Mn^{3+}{\to}Mn^{4+}$의 方向으로 生成되었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3559-3564
• /
• 2013

Alumina particles were grafted onto the surface of manganese oxide particles via the coprecipitation process using surfactant and cosurfactant. The phase of Mn/Al salts (Phase I) and the phase of precipitation agent (Phase II) were prepared in aqueous surfactant solution, separately. Phase II was added into Phase I and the reaction was performed to form the precursors of composites through hydrogen bonding between $Mn(OH)_2$ and $Al(OH)_3$ prepared by the reaction of Mn/Al salts with the precipitation agent. The alumina-grafted manganese oxide particles were obtained as a final product after calcination. The concentrations of Al salt and surfactant were varied to investigate their effects on the formation and the crystallinity of composites. In addition, the crystal structure of products could be controlled by changing the calcination temperature. Through thermal analyses, it was found that the thermal stability of manganese oxide was improved by the introduction of alumina on its surface.

• 공업화학
• /
• 제19권1호
• /
• pp.66-72
• /
• 2008

탄소강 재질은 부식에 취약하여 용도에 따라 화성피막화 공정으로 처리하여 내부식성을 부여한다. 제이인산망간염 수화물, $MnHPO_4{\cdot}2.25H_2O$는 인산망간피막을 입히기 위한 전처리 공정용 혼합물 제품의 주성분으로 사용된다. 이 망간 함유 물질은 수용액 중에서 합성되어 여과와 건조, 그리고 일련의 건식 분쇄와 분급 과정을 통하여 생산된다. 이러한 공정은 명백히 환경친화적이지 못할 뿐만 아니라 비용 효율적이지 못하다. 본 연구에서는 더블제트 침전 기술에 기반을 두고 수용액 중에서 해당 망간 화합물을 입자 크기가 비교적 균일하게 합성하기 위한 새로운 공정기술 원리를 실험적으로 검토하였다. 안정화 첨가제의 효과들이 주사전자현미경 사진을 통하여, 생성된 결정성 침전 입자의 크기의 균일성 측면에서, 비교 검토되었다. 폴리비닐 피롤리돈과 아라비아 검이 더블제트 침전 공정에서 결정의 성장 단계를 제어하여 비교적 균일한 입자를 합성하는 안정제로서 훌륭한 효과를 발휘하는 것으로 밝혀졌다.

• 소성∙가공
• /
• 제9권1호
• /
• pp.66-71
• /
• 2000

The present study tackles the metallurgical subjects involving the thin slab-direct hot rolling process, i.e. mini-mill process. In order to clarify the effect of chemical composition of steel and MnS precipitation behaviors on the development of edge cracking during hot rolling, the content of manganese and sulfur in low carbon steel was varied and the isothermal treatment prior to roughing was applied. Edge cracking during roughing in the hot-rolling process of mini-mill was effectively prevented by means of the isothermal treatment at 115$0^{\circ}C$ for 5 minutes in the 0.4% manganese steel containing sulfur lower than 0.013%. With the increase in manganese content in low carbon steel, coarser MnS developed. The edge cracking index which denotes the total length of edge crack per unit edge-length of rolled specimens was proposed in this paper. It was found that the edge cracking index linearly decreased with the increase in the ratio of MnS.

• Journal of Information Display
• /
• 제1권1호
• /
• pp.35-41
• /
• 2000

Manganese-doped $Zn_2SiO_4$ phosphors well known as a green emitter with high luminescence efficiency were prepared by the homogeneous precipitation method, and their photoluminescence properties under vacuum-ultraviolet (VUV) excitation were investigated. $Zn_2SiO_4$:Mn phosphors obtained by this method have exhibited a high luminance of property and a spherical shape of particles. In particular, the green emission intensity of zinc orthosilicate prepared as containing around 2 mole% of manganese was much stronger than that of the commercial $Zn_2SiO_4$:Mn phosphor, while the decay time was longer. However, addition of $Al^{3+}$ and $Li^+$ into $Zn_2SiO_4$:Mn composition has significantly diminished the decay time of the phosphor without much degradation of the emission intensity.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2683-2688
• /
• 2011

Silica-manganese oxides with a core-shell structure were synthesized via precipitation of manganese oxides on the $SiO_2$ core while varying the concentration of a precipitation agent. Elemental analysis, crystalline property investigation, and morphology observations using low- and high-resolution electron microscopes were applied to the synthesized silica-manganese oxides with the core-shell structure. As the concentration of the precipitating agent increased, the manganese oxide shells around the $SiO_2$ core sequentially appeared as $Mn_3O_4$ particles, $Mn_2O_3+Mn_3O_4$ thin layers, and ${\alpha}-MnO_2$ urchin-like phases. The prepared samples were assembled as electrodes in a supercapacitor with 0.1 M $Na_2SO_4$ electrolyte, and their electrochemical properties were examined using cyclic voltammetry and charge-discharge cycling. The maximum specific capacitance obtained was 197 F $g^{-1}$ for the $SiO_2-MnO_2$ electrode due to the higher electronic conductivity of the $MnO_2$ shell compared to those of the $Mn_2O_3$ and $Mn_3O_4$ phases.

• 생명과학회지
• /
• 제18권1호
• /
• pp.84-90
• /
• 2008

충청남도 병천면 일대의 6곳의 토양시료를 채취하여 망간을 산화하는 균주들을 순수분리 하고, 이 중 망간 산화능이 가장 우수한 한 균주를 최종 선별하여 본 실험에 사용하였다. 최종 선별된 균주의 생리, 생화학적 특성을 조사하고, 16S rRNA 염기 서열분석 등을 통하여 동정한 결과 최종 선별된 균주는 Pseudomonas sp. MN5로 확인되었다. Pseudomonas sp. MN5은 fructose와 maltose를 제외한 다양한 당을 이용하지 못하였으며, 항생제인 kanamycin, chloramphenicol, streptomycin 그리고 tetracycline에는 높은 감수성을 보이고, 리튬, 망간, 바륨과 같은 중금속에 대해서는 mg/ml 단위의 높은 내성을 나타냈다. 그리고 Pseudomonas sp. MN5의 망간산화 최적 pH는 7.5이고, 망간산화 활성이 proteinase K와 가열처리를 한 시료에서 저해되었다. Pseudomonas sp. MN5가 생성하는 망간산화 단백질을 ammonium sulfate precipitation, HiTrap Q FF ion exchange chromatography 그리고 G3000sw $_{XL}$ gel filtration chromatography를 통해서 정제한 결과, 15 kDa, 46.7 kDa 그리고 63.5 kDa의 세종류의 manganese oxidizing protein가 확인되었고, 내부서 열과 N-말단 서열 분석 결과 Pseudomonas sp. MN5가 생성하는 망간산화 단백질은 외막의 porin 단백질인 것으로 추정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2488-2492
• /
• 2010

A method is described for the determination of the Po nuclides in a water sample. After the Po nuclides were purified from interfering elements in a water sample using a manganese dioxide precipitation followed by a solvent extraction method, the Po nuclides were deposited onto the silver plate. A large volume of the water sample was effectively pretreated with manganese dioxide precipitation method. To determine the optimum conditions for plating Po, the effects of the pH, volume, temperature and time on the Po deposition were investigated in hydrochloric acid solution. The investigated determination method of Po nuclides with solvent extraction was applied to a tap water sample.