• Imaging Science in Dentistry
• /
• v.39 no.2
• /
• pp.81-87
• /
• 2009

Purpose: To evaluate the anteroposterior length and buccal angle of the anterior loop, and the size and location of the mental foramen using cone beam computed tomography (CBCT). Materials and Methods: 100 CBCT images from 87 adults (43 males and 44 females) ranging in age from 20 to 73 years (average 50 years) with edentulous ridge of the mandibular premolar region were obtained. Axial, sagittal, coronal images were reconstructed from Dental and Block Images of CBCT. The anteroposterior length, shape and buccal angle of the anterior loop, and the size and location of the mental foramen were calculated from reconstructed images of axial, sagittal and coronal CBCT. Results: The anteroposterior length and buccal angle of the mental canal was 4.0${\pm}$1.2mm, 37.8${\pm}$11.60$^{\circ}$respectively. The loop type with straight course was the most common shape of the mental canal. The location of the mental foramen below the apex of the lower second premolar (78%) was the most common. The maximum size of the mental foramen was 4.6${\pm}$1.0 mm in width and 3.0${\pm}$0.6 mm in height. The inner size of the mental canal was 2.6${\pm}$0.6 mm in width and 2.1 mm${\pm}$0.4 mm in height. Conclusion: CBCT is useful to evaluate the anterior loop and mental foramen of the mandibular canal. Safe guideline of 4 mm from the most anterior point of the mental foramen is recommended for implant and surgical treatment. (Korean J Oral Maxillofac Radiol 2009; 39: 81-7)

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.519-526
• /
• 2000

Osteoporosis has recently been recognized as a major health problem in the elderly population. The disorder is manifested as a loss of bone mass accompanied by structural alteration of bone and increased incidence of fracture. Mandible also may be affected. So, I evaluated panoramic views of 66 postmenopausal women for finding the possibility of useful diagnostic mandibular parmeters of osteoporosis. To know the correlationship between skeleton and mandible, the average of the bone mineral density of lumbar from 2nd to 4th by the dual energy X-ray absorptiometry(DEXA, LUNAR DPZ. USA), and age and mandibular parameters, that is, the number of residual teeth, alveolar ridge resorption ratio, panoramic mandibular index (PMI), mandibular cortical width (MCW), angular cortical thickness (ACT), ramus cortical thickness (RCT), morphology of mandibular inferior cortical (MIC) were compared. And I divided the all tested women to the osteoporotic group and non-osteoporotic group by the use of T-score -2.0, which was derived from skeletal bone mineral density (BMD). To find the correlationship of the each group with mandibular parameters, t-test and discriminant analysis were done. The results of the t-test were that all parameters were highly related with 2 groups (p<0.05). Especially ACT, MIC, age have had even higher correlationship than others (p<0.001). The results of the discriminant analysis by the use of these ACT, MIC and age were that the discriminant function was Z = -2.973+(-1.447)$\times$(ACT)+1.131$\times$(MIC score)+(0.052)$\times$(age), the cutting score was 0.257 and the classification accuracy was 84.8%. Therefore I suggest that the consideration of the angular cortical thickness (ACT), the age of patient and the morphology of mandibular inferior cortical(MIC) may help find the osteoporosis.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.553-553
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.562.2-562
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determined as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)

• Imaging Science in Dentistry
• /
• v.31 no.2
• /
• pp.67-71
• /
• 2001

Purpose: To assess the possibility of using panoramic indices as an indicator of jaw osteoporosis. Methods: Mandibular cortical width (MCW), degree of mandibular alveolar bone resorption (ABR) and morphology of mandibular inferior cortex (MIC) on panoramic radiograph were used as panoramic indices. These panoramic indices were compared with bone mineral density (BMD) of lumbar (L1-L4) and femoral neck measured by dual energy X-ray absorptiometry. We also compared MCW and ABR of young men with those of postmenopausal women. Results : There was a significant correlation between ABR and BMD of lumbar and femoral neck. And also significant correlation between MIC and BMD of lumbar and femoral neck. ANOVA test of BMD of lumbar and femoral neck showed significant differences according to morphologic classification of inferior cortex. There was significant difference in MCW and ABR between young men and postmenopausal women. Conclusion: Our results suggested that ABR and MIC on panoramic radiograph could be reliable in screening of osteoporosis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.2
• /
• pp.126-131
• /
• 2002

Anatomical shape of the mandibular ramus, which includes the area from the rear of the mandibular second molar to the mandibular posterior border and from the mandibular sigmoid notch to the inferior mandibular border, must be carefully considered to perform orthognathic surgery. The locations of the lingula and mandibular foramen in medial side of mandibular ramus are one of the most important factors to decide the location of the horizontal medial osteotomy in sagittal split ramus osteotomy and to select the line of vertical osteotomy in intraoral vertical ramus osteotomy. Sixty-five different Korean human dry mandibles were surveyed. All mandible have permanent dentition including complete eruption of the mandibular second molar. The locations of the lingula and mandibular foramen in medial side of the ramus were identified and following results were obtained. Anterior ramal horizontal distance from lingula was $16.13{\pm}3.53mm(range:8.6{\sim}24.3mm)$, anterior ramal horizontal distance from mandibular foramen was $23.91{\pm}4.79mm(range: 14.1{\sim}39.7mm)$, horizontal width of mandibular foramen was $2.79{\pm}0.95mm(range:1.5{\sim}6.1mm)$, height of lingula was $10.51{\pm}3.84mm(range:3.1{\sim}22.4mm)$, vertical distance from sigmoid notch to lingula was $19.82{\pm}5.11mm(range:9.1{\sim}35.3mm)$. From this study, the result could be used to select the location of osteotomy lines and to decide amount of periosteal elevation to avoid injury of neurovascular bundle, and to accomplish the appropriate split in Korean patients in mandibular orthognathic surgery.

• Imaging Science in Dentistry
• /
• v.50 no.4
• /
• pp.319-322
• /
• 2020

Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.349-356
• /
• 2018

Objective: This study was performed to investigate the alveolar bone of lower incisors in skeletal Class III adults of different vertical facial patterns and to compare it with that of Class I adults using cone-beam computed tomography (CBCT) images. Methods: CBCT images of 90 skeletal Class III and 29 Class I patients were evaluated. Class III subjects were divided by mandibular plane angle: high (SN-MP > $38.0^{\circ}$), normal ($30.0^{\circ}$ < SN-MP < $37.0^{\circ}$), and low (SN-MP < $28.0^{\circ}$) groups. Buccolingual alveolar bone thickness was measured using CBCT images of mandibular incisors at alveolar crest and 3, 6, and 9 mm apical levels. Linear mixed model, Bonferroni post-hoc test, and Pearson correlation analysis were used for statistical significance. Results: Buccolingual alveolar bone in Class III high, normal and low angle subjects was not significantly different at alveolar crest and 3 mm apical level while lingual bone was thicker at 6 and 9 mm apical levels than on buccal side. Class III high angle group had thinner alveolar bone at all levels except at buccal alveolar crest and 9 mm apical level on lingual side compared to the Class I group. Class III high angle group showed thinner alveolar bone than the Class III normal or low angle groups in most regions. Mandibular plane angle showed negative correlations with mandibular anterior alveolar bone thickness. Conclusions: Skeletal Class III subjects with high mandibular plane angles showed thinner mandibular alveolar bone in most areas compared to normal or low angle subjects. Mandibular plane angle was negatively correlated with buccolingual alveolar bone thickness.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.6
• /
• pp.516-525
• /
• 2004

Mandibular symphyseal distraction osteogenesis is an alternative approach for correcting mandibular transverse deficiencies and dental crowding. The traditional approaches for these are extraction of teeth and arch expansion with traditional orthodontic treatment. Also extractions are usually unavoidable in patients with severe crowding. The purpose of this study is to evaluate the effect of mandibular symphyseal distraction osteogenesis by use of tooth-borne expansion appliance. All of 12 patients had been performed distraction osteogenesis. The surgical procedures were accomplished under local anesthesia and intravenous sedation in an ambulatory surgical setting using a routine distraction protocol. The latency period was 5 days or 7 days after symphyseal osteotomies. The rate & rhyth is a intermittent, 0.75mm or 1.0 mm per day and stabilized for 6, 8 weeks after distraction. The time of orthodontic tooth movement after distraction was variable from 2 weeks to 8 weeks (mean 3 weeks). All patients had been evaluated with study casts, plain periapical films, panorama radiograms before & after surgery. Mandibular symphyseal distraction osteogenesis increased mandibular arch width and corrected dental crowding, with paralleling tooth-borne movement, without proclination of the mandibular incisors.

• The korean journal of orthodontics
• /
• v.45 no.3
• /
• pp.121-129
• /
• 2015

Objective: This study aimed to assess three-dimensional changes in the temporomandibular joint positions and mandibular dimensions after correction of dental factors restricting mandibular growth in patients with Class II division 1 or division 2 malocclusion in the pubertal growth period. Methods: This prospective clinical study included 14 patients each with Class II division 1 (group I) and Class II division 2 (group II) malocclusions. The quad-helix was used for maxillary expansion, while utility arches were used for intrusion (group I) or protrusion and intrusion (group II) of the maxillary incisors. After approximately 2 months of treatment, an adequate maxillary arch width and acceptable maxillary incisor inclination were obtained. The patients were followed for an average of 6 months. Intraoral and extraoral photographs, plaster models, and cone-beam computed tomography (CBCT) images were obtained before and after treatment. Lateral cephalometric and temporomandibular joint measurements were made from the CBCT images. Results: The mandibular dimensions increased in both groups, although mandibular positional changes were also found in group II. There were no differences in the condylar position within the mandibular fossa or the condylar dimensions. The mandibular fossa depth and condylar positions were symmetrical at treatment initiation and completion. Conclusions: Class II malocclusion can be partially corrected by achieving an ideal maxillary arch form, particularly in patients with Class II division 2 malocclusion. Restrictions of the mandible in the transverse or sagittal plane do not affect the temporomandibular joint positions in these patients because of the high adaptability of this joint.