• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.71-92
• /
• 1999

This study is to analyze the stress and displacement on the jaws during the bilateral and unilateral clenching task on three dimensional finite element model of the dentated skull. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 1.9mm intervals. The CAD data were extracted from the tomograms through digitizer(Summa Sketch III, USA) and then reconstructed by means of the spline method in the CAD program. In this project, a commercial software I-DEAS(Master Series ver-sion 3.0, SDRC Inc, USA) was used for three-dimensional stress analysis on the finite element model. which consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The results are as follows. ; 1. During the bilateral clenching, each major muscle forces caused high stresses on various areas of skull: masseter muscle on articular disc and teeth ; temporal muscle on mandible and periodontal ligament ; medial pterygoid muscle on the temporomandibular joint. During the unilateral clenching, masseter muscle induced the maximum stress ; medial pterygoid muscle the minimum stress. 2. During the bilateral clenching, higher compressive stresses on articular disc were generated by the masseter muscle and higher deformation occurred on the most front outer sites. And during the unilateral clenching, temporal muscle and medial pterygoid muscle exerted their forces to twist temporomandibular joint area of the balancing side and induced a higher compressive stresses on the front outer sites of articular disc. 3. During the bilateral clenching, the masseter muscle bended the mandible outwardly, and then caused tensile stresses on the lingual surface of mandibular symphysis. And the medial pterygoid muscle caused tensile stresses on the labial surface of mandibular symphysis. 4. When each muscles were simultaneously applied on jaws, a high stress and displacement took place on mandible rather than on the maxilla. Also, a high stress and displacement took place during the unilateral clenching rather than during the bilateral clenching.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.513-517
• /
• 2008

Purpose: This study aimed to evaluate distribution and maximal value of mechanical stresses on the reconstruction plate, bridging mandibular symphysis defect, and to optimize the most appropriate locations of the plate to distribute the stress causing the fracture of the plate. Materials and methods: Four types of reconstruction were constructed by different number and location of the reconstruction plates on the 3 D finite element model (FEM) of a human edentulous mandible; Type I: one plate on the inferior border of the anterior mandible, Type II: one plate on the middle of the anterior mandible, Type III: one plate on the superior border of the anterior mandible, and Type IV: two plates on the inferior and superior border of the anterior mandible. Results: The results showed that the maximal stress of type I (234.29 Mpa) was lower than that of type II (260.91 Mpa) and type III (247.37 Mpa), but higher than that of type IV (186.64 Mpa). We could also observe that the stresses are tending to focus on the inner side and inferior part of the plate which connected proximal segment from the vertical load. Conclusions: On the basis of the findings, it was concluded that using a plate on the inferior border of mandible or two plates on the inferior and superior border of mandible are more favorable to distribute mechanical stresses, which could reduce the fracture of the plate.

• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.37-43
• /
• 1980

This study was undertaken to assess the effects of demethylchlortetracycline on bone growth of mandibular symphyseal region in rats. Demethylchlortetracycline at 30mg/kg body weight, respectively, were daily administered by mouth to the sewen female rats from 10th day of pregnancy to 13th day. Thirty six new-born rats from these experimental animals were used for histological examination at 1, 5, 10, 15, 20, 25 and 30 days. All these new-born rats were killed by an overdose of ether. Mandibular bodies were removed and fixed in $10\%$ neutral formalin,. Carney and aceton. Specimens were embedded, sectioned and stained with H-E, Van Gieson, PAS and prepared for alkaline phosphatase. The results were as follows; 1. Until erupting of incisors, hyaline cartilage was located in relatively large symphyseal space, but bone trabeculae of ossifying area at incisal side were arranged irregularly in experimental group. 2. During this period, PAS reaction was moderately positive, but alkaline phosphatase reaction was slightly positive. 3. By erupting or incisors, symphyseal space appeared narrower like control group, but alkaline phosphatase reaction tended to slow down. 4. By erupting of molars, symphyseal space appeared muck narrower, and cartilane plate was reduced and aealed off like control group. Alkaline phosphatase reaction tended to slow down severely.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.210-213
• /
• 1999

A 15 months old male pit bull terrier was shown submandibular swelling, which was extended from left submandibular area through mandibular symphysis to right submandibular area and toward around left neck. In history taking, recurrence of swelling was recorded after conservative surgical incision, drainage and dressing. Palpation revealed no pain and heating, partial flutuation and hardness. By paracentesis, it was showed blood-tinged tenacious exudate without bad-smelling. Left submandibular salivary gland was able to be movable freely and the size decreased to half of that of right submandibular salivary gland. It was diagnosed as cervical salivary mucocele. In operation, rostral portion of left sublingual salivary gland was observed to be damaged transversely, showed black color and leaked saliva. Submandibular gland and rostral portion of sublingual salivary gland were resected, after ligation of ducts of submandibular and sublingual salivary glands. At 15 days postoperation, serosanguineous exudate from operation wound was dramatically decreased and stable granulation tissue mass at this area was first palpated. At 39 days after operation, outline of left and right mandibular was appeared normal and skin tenderness of mandibular area was equal to that of the other body wall.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.119-131
• /
• 1986

The purpose of the study is to note the effects of the resection of the lateral pterygoid muscle on the mandibular growth in the growing rats. Twenty four female Wistar rats were used in the experiment. They were divided into three groups: group 1 ; bilateral sham operation group 2 ; bilateral resenction of the lateral pterygoid muscle group 3 ; unilateral resection of the lateral pterygoid muscle (The right lateral pterygoid muscle was resected and the left one was sham-operated.) Groups 1&2 were sacrificed eight weeks lateral and group 3, four weeks later. All specimens were measured with calipers, and stained with hematoxylin and eosin. Groups 1 & 2 were compared with each other. In group 3, the right side was compared with the left. The results were as follows: 1. In the growing rats, the resection of the lateral pterygoid muscle was followed by a decrease of the mandibular growth. After eight weeks, the condyle-mental foramen distance, the angular process-mental foramen distance, the size of the condylar head, the supradentale-first molar distance, and the diameter of the symphysis were significantly smaller than the control. 2. Resection of the lateral pterygoid muscle resulted in decrease of the thickness of the cartilage layer and the prechondroblastic-chondroblastic layer after four weeks. 3. After eight weeks, group 1 and group 2 were not different significantly in the histologic sections. 4. The condylar cartilage was stabilized eight weeks after the experiment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.214-216
• /
• 2010

An osteochondroma is an osseous protuberance with cartilaginous growth potential, usually arising in skeletal bone and relatively uncommon in the craniofacial bone. Osteochondroma of the craniofacial region usually occurs at the condyle or the tip of the coronoid process, and rarely arises in the mandibular body, symphysis, ramus, and similar areas. Excision of the lesion including the periosteum is curative, and recurrence or malignant change (usually to a chondrosarcoma) after treatment is rare. We present an atypical case of osteochondroma in the left mandibular inferior border with review of literature.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.2
• /
• pp.85-93
• /
• 2022

Objectives: The aim of this study was to compare morbidities and duration of surgery, as well as bone formation in alveolar defects reconstructed with symphysis bone combined with allograft and iliac crest bone graft in patients with cleft palate. Patients and Methods: This randomized clinical trial was performed with 22 patients with unilateral alveolar cleft with a follow-up period of 12 months. In 12 patients, alveolar defects were reconstructed with chin bone graft plus allograft (Group A), while for the other 10 patients, iliac bone crest was used as donor site (Group B). Duration of surgery as well as occurrence of morbidities and complications were recorded. In addition, cone-beam computed tomographic (CBCT) scans were performed before surgery and 12 months after surgical procedures in order to compare bone formation between the two groups. Results: Postoperative CBCT demonstrated a mean bone fill percentage of 76.9% of the alveolar defect in Group A, compared with 77.0% in Group B. Paresthesia in the lower lip or chin did not occur in any patients of Group A. The mean duration of the surgical process was significantly shorter for Group A (40 minutes vs 76 minutes, P<0.001). In addition, patients in Group A regained normal gait faster than patients in Group B (1 day vs 9.5 days). Conclusion: Mandibular symphysis bone graft in combination with allograft results in favorable outcomes in patients with unilateral alveolar clefts.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.3
• /
• pp.281-289
• /
• 1994

This is a clinical study on 235 inpatients who sustained a total of 350 mandibular fractures and who were treated in our department during the period of Oug., 1989 through Dec., 1993. The results obtained are as follows : 1. The mumber of patients has not been increased year after year. In respect of incidence, there were the highest frequency as 67 patients(28.5%) in 1991 and the least frequency as 16 patients(6.8%) in 1989 and the highest frequency as 28 patients(11.9%) in October and the least frequncy as 12 patients(5.2%) in February. 2. The age frequency was the highest in the second decade(30.6%). The youngest patient was 8 months and the eldest patient was 80 years and mean age was 27.8 years. The ratio of men to Wemen was 4 : 1. 3. The most frequent cause was fall down as 86 patients(36.6%) and the next was fist blow 4 as 75 patients(31.9%), traffic accident as 56 patients(23.9%) in order. 4. The most common location was symphysis as 141 numbers(40.3%) and the next was condyle as 96 numbers(27.4%), angle as 94 numbers(26.8%), body as 14 numbers(4.0%) in order. The sum of fracture sites were 350 and there were 1.49 fracture sites per one patient and multiple fractures occured in 100 patients(40.5%) of the 235 patients. The ratio of Left to Right except for symphysis was 1.71 : 1. 5. Among the 333 associated injuries, facial laceration was 136(57.9%) and tooth injury was 58(24.7%) and extremity was 31(13.2%). 6. Among the 350 mandibular fractures, complications after treatment occured in 51(14.6%) and infection as 20(5.7%) was the most frequent complication. 7. In respect of treatment of mandibular fracture, close reduction was 64 patients(27.2%) and open reduction was 164 patients(69.8%) and other were 7 patients(3.0%) of all and so open reduction was the most common in type of treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.447-453
• /
• 2010

The hemifacial microsomia is characterized by variable underdevelopment of the craniofacial skeleton, external ear, and facial soft tissues. So, patients with hemifacial microsomia have an occlusal plane canting and malocclusion with facial asymmetry. Distraction osteogenesis (DO) with an intraoral or extraoral device is a technique using tension to generate new bone with gradual bone movement and remodeling. DO has especially been used to correct craniofacial deformities such as a hemifacial microsomia, facial asymmetry, and mandible defect that could not adequately be treated by conventional reconstruction with osteotomies. It has a significant advantage to lengthen soft and hard tissue of underdeveloped site without bone graft and a few complication such as nerve injury or muscle contracture. A 13-years old girl visited our clinic for the chief complaint of facial asymmetry. She had a left hypoplastic maxilla and mandible, occlusal plane canting and malocclusion. We diagnosed hemifacial microsomia and lanned DO to lengthen the affected side. Le Fort I osteotomy, left mandibular ramus and symphysis osteotomy were performed. The internal distraction devices fixed with screw on maxillary and mandibular ramus osteotomy sites. External devices were adapted to lower jaw for DO on symphysis osteotomy site and to upper jaw for rapid maxillary expansion (RME). At 7days after surgery, distraction was started at the rate of 1mm per day for 13days, and after 4months consolidation periods, distraction devices were removed. Simultaneous multiple maxillo-mandibular distraction osteogenesis with RME resulted in a satisfactory success in correcting facial asymmetry as well as occlusal plane canting for our hemifacial microsomia.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.266-275
• /
• 2008

Dental endosseous implants require sufficient alveolar bone volume and quality for complete bone coverage and initial stability. But, atrophy or resorption of alveolar bone height and width according to patient's age and period of tooth loss can prevent ideal implant placement. Bone graft procedure has been proposed before or simultaneously with the placement of dental implants in patients with insufficient alveolar bone volume. While allografts, xenografts, and alloplastic bone grafts have been proposed and studied for alveolar ridge augmentation, the use of autogenous bone grafts represents the 'gold standard' for bone augmentation procedures. Conventional bone grafts are usually harvested from distant sites such as the ilium or ribs. Recently there is a growing use of intraoral bone grafts from intraoral donor sites such as mandibular symphysis, mandibular ramus and maxillary tuberosity. We recommend that the mandibular ramus is a safe autogenous bone graft donor site for bone harvesting with low morbidity. We report various effective autogenous bone graft procedures from mandibular ramus for the implant placement on various atrophic alveolar ridges.